![]() |
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
Quote:
I still have not got anything worth while from LKQ, so I'm going with Certified Auto Recycling for the engine. I even called the guy at LKQ on Friday, and all I got was excuses as to why he has not got back to me. And he STILL didn't have a price for me. And I have also emailed a few other places and have not heard back from them yet either. So apparently the economy isn't doing too bad for them, since they don't need my business. Certified Auto Recycling http://www.barbersauto.net/ or call 1-800-632-2091 ext. 14, Grant Smith. |
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
i found a 2004 5.3/4l60 out of a burb in craigslist today for $1800 all wiring, cpu, everything 40,000 miles. going to call him tomorrow and find out more. thanks for the link glock i'll check it out.
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
That's not too bad, especially for the mileage and coming with a trans. The 04 will have a drive by wire throttle body, so be sure to get the TAC (throttle actuator control) module and the throttle pedal itself. Hell, get everything they will let you take for the money!
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
:lol: were bouncing back and forth from each others thread! yes thank you for that heads up. i hope he still has the truck there to verify miles and maybe hear it run. ill find out tomorrow and let you know.
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
Man you're really flying through this build! Good choice on the LSx drivetrain.
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
Quote:
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
:) thanks leevon!! trying to keep the momentum going! pretty easy with this great cheering section of guys on this forum!!
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
The attention to detail is rediculous on this one :metal:...keep up the good work
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
Quote:
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
Quote:
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
Great job, and super fast momentum.
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
Quote:
Quote:
Quote:
Quote:
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
Quote:
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
Dang it man, now I have to get hooked on another site too! :lol: I'll have to check it out.
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
Quote:
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
funny thing......I went over to that site to register......well turns out I have been a member for close to a year :lol:
guess I'm getting old :lol: |
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
You're slipping man! :lol:
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
:lol::but: i have a good excuse though.... ive been scouring ls1truck.com and performancetruck for info on this ls swap... lots of reading. seems as if 1badc10 wishes he would have went w/ a sbc because the 5.3/4l60e is getting expensive. i think he's had quite a few problems though... on a side note i do have a bit of an update.
talked to the guy w/ the motor and trans on cl. he said the motors actually a 2002 and the trans is 2004. so no dbw throttle... and he said he would give me a 4 month time period to get it running (warranty) but that wont work because i'm not just stabbing it in there and hooking it up... i have ALOT of work left before i even think of firing it up. i dont know what to do:( swapping in the ls might be too much during a total frame off. i'm going to do a bit more reading in my book 'how to swap an ls motor into anything' before i start trying to climb back up that damn fence!:lol: |
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
1badc10 self admittedly went about the install the wrong way. He had major trans issues for who knows why, one head gasket had to be replaced because who ever did the work before put the gasket on upside down, and he needed to get a stand-alone harness but he self-modified the stock truck harness. I know that would be a lot of work for anyone.
If it were me i'd buy an engine/trans/harness/pcm combo from one place. The best way might be to become friends with the local salvage yard and let them know what you're looking for while you start the body work and paint. Then once they find your combo, you install, send the harness out to get re-worked at a number of companies that do good work, maybe the same people can re-tune the pcm aswell. Your major problem may be the fuel system, you may need new(87)tanks or just a rear mounted blazer tank(87-91), use a stock sender and a newer gm vortec intake pump. I think you might be able to use your tanks with newer in tank pumps just like s&p did with their install on a 77. Here is a link to another LS install from the same company. It's a full on show install, you would not need to do that much work but it does contain a lot of good info. http://www.hotrodlane.cc/PDFFILES/85...s2%20truck.pdf |
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
sbtork, i really apprieciate your help and suggestions buddy. i'm going go visit a few places today and call the dang smog police... body work wont start until end of august but i can start on the fire wall and cab now...
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
Anything I can do to help. Once I get financial things sorted out im going to start my own build thread, I see how helpful it can be.
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
Quote:
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
mentally and monetary:lol:
|
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
Hey, did I ever PM you the list of parts and part numbers for the complete fuel system stuff? If I didn't, let me know. I can PM it to you or just post it in your thread so it becomes permanent record!
Then it will be staring back at you every day........ :lol: |
Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
:lol: yes i made a few copies too. but feel free to post it in the thread! its great info for others!
|
All times are GMT -4. The time now is 02:42 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com