Re: Newbie with a 65 Chevy
Not to much has been going on in the shop been to busy.:sumo::sumo::sumo:
I did get my new Dakota Digital gauge set in makes me want to get back in shop. |
Re: Newbie with a 65 Chevy
What??? No Pics??? :mm:
Aiming for Sunday afternoon, will call ya tomorrow...;) |
Re: Newbie with a 65 Chevy
X2 on "What no pics!?!" :lol:
|
Re: Newbie with a 65 Chevy
I hear ya on not enough time. Glad to hear your gauges came in.
|
Re: Newbie with a 65 Chevy
2 Attachment(s)
I have not had much shop time but I did clean the camaro up and take it for a cruise. Here are a few pics.
|
Re: Newbie with a 65 Chevy
Those were the wrong pics. It still looks the same. :lol::lol: I am getting ready to drive the camaro to a local car show this weekend. There should be some nice rides there. The show is at Imboden Arkansas 8-16-14 this weekend. It starts at 9 am
|
Re: Newbie with a 65 Chevy
:metal::metal::metal:
|
Re: Newbie with a 65 Chevy
Quote:
|
Re: Newbie with a 65 Chevy
1 Attachment(s)
The show was good!! There were about 130 cars or so. My wife's camaro ( that's what I tell her) got a 1st place. She was happy.
|
Re: Newbie with a 65 Chevy
New Bling for the Wife and her Camaro...:metal:
Congrats!!!:mm: |
Re: Newbie with a 65 Chevy
Thanks! The show got me wanting to make some progress on my truck. So I started taking the bed apart. Man that is a job! 95 degrees is almost to hot for me but I made a little progress.
|
Re: Newbie with a 65 Chevy
1 Attachment(s)
Here's pics.
|
Re: Newbie with a 65 Chevy
1 Attachment(s)
More pics.
|
Re: Newbie with a 65 Chevy
yesterday was hot… changed oil in the daughter's car, moved all my steel scrap so I could relocate the frame I got from ya… getting ready to rip it apart for clean & paint...:mm:
Then helped my son with some motorcycle chain maintenance and check his GF's car to find a fried pass door window motor… so no truck progress as the heat had me wore out by that time...:waah: I do believe summer in Arkansaw has finally arrived...:thud: Glad to see you make some progress...:metal: |
Re: Newbie with a 65 Chevy
1 Attachment(s)
Finally got some shop time. Stripped the cab down getting everything ready to take to get sandblasted. Also did a test panel for the color of the truck. I was thinking grey with a red or black stripe. What do y'all think?
|
Re: Newbie with a 65 Chevy
1 Attachment(s)
I got the cab and other parts loaded and delivered to get sand blasted.
|
Re: Newbie with a 65 Chevy
Did know body like my grey paint that I picked for the 65.
|
Re: Newbie with a 65 Chevy
Quote:
|
Re: Newbie with a 65 Chevy
Thanks 63. I have not ruled out a black stripe either. The interior is going to be grey seats along with most of the metal. The carpet will be black along with the center of the doors, steering column and bezel. So I have thought about a black stripe and maybe some black in the bed.
|
Re: Newbie with a 65 Chevy
1 Attachment(s)
Here is another pick taking it to get blasted.
|
Re: Newbie with a 65 Chevy
The Wife is home and I'm back looking around a bit...:metal:
Diggin' the Grey, I'd go with a black or Red stripe...:mm: |
Re: Newbie with a 65 Chevy
New parts..making progress...wife gets 1st place= :metal::metal::metal::metal::metal:
|
Re: Newbie with a 65 Chevy
I brought the truck home from getting it sand blasted. I have a few more places that will need some rust repair but not that bad. I will post some pics up later.
|
Re: Newbie with a 65 Chevy
1 Attachment(s)
Here is a pic of my Dakota gauges.
|
Re: Newbie with a 65 Chevy
Lookin Good Brother… :metal:
Headin' out Sunday!!!:uhmk: |
All times are GMT -4. The time now is 02:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com