The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - OR 67-72 cross members (https://67-72chevytrucks.com/vboard/showthread.php?t=683069)

Quote:

Originally Posted by ghalperin (Post 7936901)

They have them in stock. I ended up straightening mine.

I am interested.
Posted via Mobile Device

Re: 67-72 cross members

interested in rear cross member buy front leaf spring mount bracket 72 C- 20
also driver side front leaf spring frame mount also upper shock mount both sides
thanks 11779 roy

Re: 67-72 cross members

Do you still have the c20 trailing arms?

Re: 67-72 cross members

Hello since you have all these crossmembers i was hoping you might have a centerlink or drag link for a 1970 C10 with power steering. Mine is hogged out at the tierod end taper.

Also need a passenger side LCA .

Thanks

Re: 67-72 cross members

Hey guys, DLTruck1973 hasn't even logged on since May 2016, so I doubt you'll be getting and responses anytime soon.

Re: 67-72 cross members

Looking for a 71 th350 cross member shipped to 06032.

thanks, JP

Re: 67-72 cross members

I know the thread is for cross members - I am looking for rear leaf spring hangers, all hardware, front and rear of leaf springs. Thanks

Re: 67-72 cross members

Do you have a front crossmember to fit a 1967 GMC 1 ton truck? It originally came with the 305 V6 engine. It’s my understanding standing that this is kind of a unique crossmember because of the length of the engine, it was different shaped from others.

Re: 67-72 cross members

2wd TH350/TH400 automatic cross member $40.00 shipped to 95688.

thx

Re: 67-72 cross members

DLTruck1973 hasn't even logged on since May 2016, so I doubt you'll be getting and responses anytime soon.

Quote:

Originally Posted by FickleFinn (Post 8604393)

2wd TH350/TH400 automatic cross member $40.00 shipped to 95688.

thx

Re: 67-72 cross members

Quote:

Originally Posted by DLTruck1973 (Post 7317151)

DLTruck1973 has just about any frame cross member you would need for your 2wd or 4x4 pick ups, suburbans and blazers.

Here are some prices for a few of the ones we have. If you do not see what you need, please ask as we have many items not listed.

All prices are plus shipping. Please respond to this thread and remember that I have more than one of a certain cross member in most but not all cases. First "I'll take it" will hold the part until a shipping quote is made. At that time the buyer will have 24 hours to make payment or the part will go to the next in line.

4x4 engine cross member $85.00 each
4x4 trans/transfer case cross member $60.00 each
67-72 very front cross member (under fan shroud) $25.00 each
2wd V8 manual trans cross member $40.00 each
2wd TH350/TH400 automatic cross member $40.00 each
2wd C10/C20 trailing arm cross member $50.00 each
very rear cross member (has hole for tail light wiring harness) 2wd $30.00
very rear cross member (has hole for tail light wiring harness) 4x4 $40.00
cross member above spare tire. (the small one) $20.00

Thank you for looking. Please let us know if you have any other request for frame cross members, spring hangers, shock mounts, etc. We only sell above average clean parts.

Thomas

I need a rear shock mount crossmember and coil spring plates for a '72 Chevy C10. Your private message quota is exceeded, so I can't contact you directly! Please email me at mrjayhawk@me.com or call me at 913-219-5575. Thanks! Scott

Re: 67-72 cross members

Quote:

Originally Posted by KansasTruckGuy (Post 8659290)

Original poster has not been on board since 2016

Re: 67-72 cross members

Thanks, Richard. I probably should have noticed that. I appreciate you letting me know!

Re: 67-72 cross members

Quote:

Originally Posted by KansasTruckGuy (Post 8659381)

Thanks, Richard. I probably should have noticed that. I appreciate you letting me know!

No problem. I probably have some but it will be the 20th before I can check. I am out of town

Re: 67-72 cross members

Quote:

Originally Posted by richard2717 (Post 8659391)

No problem. I probably have some but it will be the 20th before I can check. I am out of town

I appreciate it! I'm not in a big hurry. It just jumped to the front of my brain when I saw others asking about them. Have a nice trip!

Re: 67-72 cross members

Looking for front spring hangers 71 k20 all 4 brackets

Re: 67-72 cross members

I need a very front crossmember for a 1972 half ton shipped to 85396.

Re: 67-72 cross members

D&L Truck Parts is a good resource. They are located in Junction City, OR.
I had them rebuild my rear end and upgrade the rear drums to the HD JB5 style drum for my rig.

My experience working with Tom was very good. He may not have been on the forum in a while but you can contact him direct. Here is his business website:
https://www.dltruckparts.com/

Re: 67-72 cross members

Quote:

Originally Posted by PDXk5 (Post 8712471)

Just a note on D&L Truck Parts.

This is the other Tom that worked there a while ago. The business is closed for business. All of the 67-72 truck parts have been sold ( bought out).

Thank you,
Tom

Re: 67-72 cross members

Quote:

Originally Posted by TBONE1964 (Post 8712689)

Just a note on D&L Truck Parts.

This is the other Tom that worked there a while ago. The business is closed for business. All of the 67-72 truck parts have been sold ( bought out).

Thank you,
Tom

Hey Tom,
Didn’t know that. Odd that he hasn’t taken down their website.

Anyway, thank you for clarifying, I don’t want to give out outdated information.