![]() |
Re: Shawno72's long overdue 68 daily driver build thread
Yes you may have to slide re crossmember back or forward but you can still use the original member. I'll be sure to post plenty of pics of the process
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Thank you good sir I was hoping to do mine without lifting the cab or anything that's why I was shopping around for new crossmember a that use te ore existing holes and what not
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Got the 15x7s for the front cleaned and painted. Plus I just got off the phone with Devin forum member Dsigh and it looks as though ill get two more 15x7s for the rear. Once they're installed I'll see if I still want 15x8s for the rear. Amazing why a rattle can can do :lol:
http://i.imgur.com/DS6DwW9.jpg http://i.imgur.com/xxkRqhp.jpg Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
No joke those look really good my grey grandpas 73 has some original rallies on it that I can't wait to restore for that truck. Great job on the rattlecan job Shawn :metal:
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
I jus hit the wheel with a wire wheel and wipe clean and spray. I'm glad they turned out as good as they did because I was checking prices on powder coating which is not cheap.
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Really? I had four rust pitted chrome trailer wheels had them blasted and coated black for 100-125$
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Very nice!!!!!
|
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
1 Attachment(s)
|
Re: Shawno72's long overdue 68 daily driver build thread
lol
|
Re: Shawno72's long overdue 68 daily driver build thread
Nice upgrade!
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
[QUOTE=shawno72;5856765]You have to tell where this place is, that is a good price. Is their work quality good?
Billington out of Modesto or even progressive just down the street from them. And I've had all my sheet metal powder primed up in Lodi had my whole bed tailgate and a left front fender done for 500$ last year course he's a little nicer to me since he warped my current hood. I feel that powder coat/prime is extremely reasonable compared to all the time labor and materials anyone would use to paint and seal their body parts or suspension/wheels themselves Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Thanks for the info Dylan. Where in Lodi?
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
In Lodi on Vine st right off the freeway is called precision powder coating that is where I had my front clip and bed done the guys name is Phil and the ones in Modesto right off of carpenter exit do most of my suspension/little parts/inner fenders is called Billington and or Progressive down the street from them that's the places I deal with if you were looking to do a few nick nack parts Modesto would be better.
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
Which one?
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Haha guess that would help myhe one in Lodi.
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
My only bad experience would be that they warped my factory paint 71 hood which i was irate about and he was truly sorry and definitely discounted the price by I have a spare hood that ill do so I'm not upset anymore just wishe I would have paint stripped most of it before sending it up there. Other than that powder prime on the insides of my bedsides and insides of my front fenders almost as good as when GM dipped the parts from factory and will definitely last forever I also used their high build grey powder which can be body worked immediately I should have pictures of their pieces on my build in the earlier pages
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Page two post #42 is my bed starting bodywork over powderprime
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
2 Attachment(s)
Some pics of the 700r4 that will be going in on Monday :metal:
Attachment 1052998 Attachment 1052999 |
Re: Shawno72's long overdue 68 daily driver build thread
Awesome Shawn!! You will love it!
|
Re: Shawno72's long overdue 68 daily driver build thread
Woo buddy she looks perty already
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
Quote:
http://www.bowtieoverdrives.com/cata...php?ITEMID=213 |
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
Cant complain about that! lol
|
Re: Shawno72's long overdue 68 daily driver build thread
Nice you'll love that 700r4, someday I'll add overdrive to mine as well
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
You doing the PT with us ShawnO?
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
You'll love the 700r4! I put one in my 79 Chevy and it worked great.....enjoy!!!!
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
2 Attachment(s)
Ok guys and gals I have a question and want your opinions. I saw this pic posted this morning and like the look of thin whites with the chrome trim rings. Do you think it will look good with my style center cap?
Attachment 1053816 Attachment 1053818 |
Re: Shawno72's long overdue 68 daily driver build thread
I think it would look sweet!
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
I was thinking so too. Here is the link of the rings I was considering
http://www.ebay.com/itm/220890655547...84.m1438.l2649 |
Re: Shawno72's long overdue 68 daily driver build thread
5 Attachment(s)
Ok kinda of a slow day at work so I put the truck on the lift and took some before pics with the manual trans so that I would have record of what used to be in there. You know this tranny has been in the truck since 1968 I'm sure and even though it grinds and makes noise in every gear except 4th a small part of me is gonna miss it...................NOT!!!!!! I hate that thing :lol::lol: In all seriousness for for almost a year and a half that tranny has got me everywhere I needed to go. :chevy:
Attachment 1053910 Attachment 1053911 Attachment 1053912 Attachment 1053913 Attachment 1053914 |
Re: Shawno72's long overdue 68 daily driver build thread
I like the idea. I have never seen copos with trim rings. Usuallly copo = plain jane.
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
I asked myself this question a few months back. I put a set of 17" Rallye's and thin whites on my Impala but wasn't sure if trim rings were needed or not. After putting them on, I decided not to bother with the rings. The white line kind of acts as a trim ring, in a visual kind of sense. I decided putting on rings would make the wheels look too busy. Sounds silly but I like the look of just thin whites with caps. No rings. http://i33.photobucket.com/albums/d9...ewcaps-800.jpg |
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
1 Attachment(s)
Stuff for the tranny swap next week.
Attachment 1053997 |
All times are GMT -4. The time now is 04:36 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com