Originally Posted by royculb (Post 5914089)

First post on this board, just bought this 61 Chevy. Trying to determine which color to paint it, definately want to keep the white cab and bumpers.

Originally Posted by Dano0579 (Post 5908023)

I made this up this morning to hang up in my garage. I'd thought I would post it so others can use it if they like.
Posted via Mobile Device

Originally Posted by Dano0579 (Post 5908037)

After making this chart up It really made me want a 33 Chevy truck to restore
Posted via Mobile Device

Originally Posted by kgmunro (Post 5930433)

Is that a pearl white mace?

Originally Posted by royculb (Post 5914089)

First post on this board, just bought this 61 Chevy. Trying to determine which color to paint it, definately want to keep the white cab and bumpers.

Originally Posted by sixtreschevy (Post 5938995)

Heres my 63 c10 shortbed

Originally Posted by Dano0579 (Post 5949502)

Can anyone ID what year model this truck is? Looks like a 1971 front end with a 1962 back end?!%

Originally Posted by jbgroby (Post 5955220)

I was going through a photo site on the history of the SR-71 Aircraft and what to my wondering eyes should appear.. a 1960-1961 GMC with the team moving an SR-71. Ain't it GREAT!

GMC Gets More Commies.....

Originally Posted by Chevy.4.Life (Post 5068225)

here are the before pictures of my newly aquired 1965 6 man crew cab

Originally Posted by jeffersonraley (Post 5765741)

Just installed these 2010+ Suburban seats into my '66. The second row is a late model 3rd row. It just barely clears the tubbed wheel wells. Best of all it gives me shoulder belts for kids sitting in the rear. I used the 10+ factory brackets and cut holes in the plywood floor for clearance. Then I used heavy sheet steel on the bottom to plug the holes and provide secure mounting for the bracket bolts. The brackets are almost flush with the floor, and the seats fold and tumble (and pull out) when I need the extra storage.

In the front I offset the passenger seat another 3" (it is already offset about 2" stock) to give better access to the rear. The seats are power and installation was pretty straightforward. The only surprise was finding 21 existing seat mounting holes in the driver's floorpan! Apparently this truck has had a lot of different interiors through the years. I welded the extra holes to prevent rust.

New suspension is going on later this week. Will post pics of the results once I get that done (and wash the poor truck.)

Originally Posted by Rich 5150 69 (Post 5974637)

Just hooking up sometimes gets a little hairy....

Originally Posted by Slow Build (Post 5974648)

Got Torque?

Originally Posted by Dano0579 (Post 5949502)

Can anyone ID what year model this truck is? Looks like a 1971 front end with a 1962 back end?!%