![]() |
Re: My 50 roadster pickup build
Looking good! Gotta love new paint:metal:
|
Re: My 50 roadster pickup build
2 Attachment(s)
Don't know what I did wrong but pics of bed painted completely didn't show:dum:. So here they are
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
1 Attachment(s)
Sorry so late, just got free. Back to the cab body. You can see all the rust between the upper and lower parts of cab. To keep this from coming back, I will spot blast a spot about 5" long between the body pieces. Weld it solid, then grind a line back in to match were the two pieces were attached. This took awhile, but I still have the body line and don't have to worry about rust.
|
Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 Don't have a close up of repair, but you can see there is still a line. Here I have stripped the old paint, etc. Added some filler on the top piece.
Pic 2 Another view, still need to do filler work on the corner patch panels. |
Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 In epoxy primer, now you can see the body line better.
Pic 2 In high build primer, don't have one in the final gray primer. |
Re: My 50 roadster pickup build
3 Attachment(s)
Pic 1 Making some more repairs to lower cowl area.
Pic 2 A little filler on drivers side. Pic 3 In high build primer. |
Re: My 50 roadster pickup build
1 Attachment(s)
Here is the bottom of cab, original rusty section in back and new floor up front.
|
Re: My 50 roadster pickup build
1 Attachment(s)
After blasting I painted the bottom with POR, immediately after painting I sprayed a thin layer of primer on this. That way you can sand and paint without coming off.
|
Re: My 50 roadster pickup build
1 Attachment(s)
Here it is painted the teal color.
|
Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 Stripped firewall for primer.
Pic 2 In epoxy primer. |
Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 In high build primer and the black section is POR and primer. You can also see my drain tube for the AC.
Pic 2 In final primer. |
Re: My 50 roadster pickup build
1 Attachment(s)
Here is the dash in final primer.
|
Re: My 50 roadster pickup build
3 Attachment(s)
Pic 1 Got the dash area all masked off and here is the cab in teal paint.
Pic 2 Another view. Pic 3 Also painted the doors. |
Re: My 50 roadster pickup build
That's it for today. OK guy that's about 300 pics I've posted and not to many replies, come on give and old dog a bone now and then.:confused::whine::wop:
|
Re: My 50 roadster pickup build
I was wondering if you'd do anything with the rear cab seam, guess I just needed to wait and see....
How much work did it take to clean up the seam after being welded? I did something similar, welded it and ground it somewhat. I'm thinking of making a profile template off the doors and trying to get a similar profile on the back wall (since the doors never had a seam to begin with). I tried to make sure my welds were hot and quick so as not to build up too much material in there, and I think it worked pretty good but I'm trying to get some insight into what it'll take to make it look good....and yours looks good. Thanks! |
Re: My 50 roadster pickup build
I'm still amazed. I always wanted to do the removable top mod to mine, but didn't have the guts! Or skills but you've got em. Looks great......more pics!!
Posted via Mobile Device |
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
Jim your posts are like a good book, I find myself wanting to look at the end and see how it all turns out, but I don't want to miss all the good stuff that leads up to the end. Don
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
3 Attachment(s)
Posting early today, got plans for later tonight.
Pic 1 Misc parts ready for blasting Pic 2 more parts pic 3 frame ready for blasting |
Re: My 50 roadster pickup build
3 Attachment(s)
Pic 1 Engine in primer.
Pic 2 Misc parts in primer Pic 3 more parts |
Re: My 50 roadster pickup build
3 Attachment(s)
Pic 1 Engine in teal paint
Pic 2 & 3 misc parts painted. |
Re: My 50 roadster pickup build
4 Attachment(s)
At this point you are thinking is this guy crazy or what, paint the axle flanges. Well my thinking is if I take everything apart and put back together, it has given me the chance to check everything, retorque all bolts, etc. I feel a lot safer the first time out and it's just time and a little paint. If something does go wrong, it's easier to work with clean parts. This is NOT a show truck, eventhough I go to many local shows, I drive this thing everwhere it goes, it's NOT trailered, and it's been put away wet many times. This is just how I build my stuff. Enough BS
Pic 1. axles Pic 2 rear axle housing pic 3 backing plates & drums pic 4 Misc. parts |
Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 Here the frame is blasted and ready for primer and paint.
Pic 2 frame all painted. |
Re: My 50 roadster pickup build
1 Attachment(s)
A little detail paint on valve covers and air cleaner (not shown).
|
Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 Engine and trans in place on frame.
Pic 2 Brake setup installed and running brake lines. Yes I also paint my brake lines:lol::lol:. I use silicone brake fluid, so I don't worry about eating paint. |
Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 All the goodies installed:ennyd::ennyd:
Pic 2 View from back side. |
Re: My 50 roadster pickup build
That's is for today, enjoy. Jim
|
Re: My 50 roadster pickup build
Looking good!
|
Re: My 50 roadster pickup build
This is one of the best, if not the best, projects i have ever seen....i love this build and I am getting pumped for you to finish!
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
Thank you so much for the excellent ideas from your build. I love some of the little custom touches you did. I also love it that this truck isnt a trailer queen, so stop being so modest, that truck rocks and I hope my truck turns out half as nice. I work on my truck every night and then before I go to bed I get on the computer to see what you have posted next, can't go to sleep till I see what you have posted so that I can come up with mods to mine based on what you have done. think I'll do like you have done and post my build after I finish it.
|
Re: My 50 roadster pickup build
Great work Jim. Keep it coming!!!
Panelman55 |
Re: My 50 roadster pickup build
Quote:
Quote:
|
Re: My 50 roadster pickup build
I think it's great that you are posting pictures after your build. You just did it your way,now we can copy and adjust your GREAT ideas to suit us. Thanks for taking the time to do this for us. This thread is a daily read for me. I look forward to each and every post.
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
1 Attachment(s)
OK on with todays post.
Inside of dash painted. The dash was painted to match the Ultra-leather in the interior. Paint shop mixed paint, then I had them add 50% flattening agent to the paint. In makes it real thin, just add hardner and spray. Put on about 4 or 5 light coats. Easy to keep clean. |
All times are GMT -4. The time now is 01:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com