Re: 1965 LWB Stepside Build
 

Good to see ya back and at it!
I like the seat.

Re: 1965 LWB Stepside Build
 

Thank you sir! I picked up the seat Saturday, but it is still in the back of my SUV being "quarantined" haha I am waiting on some new seat bolts then will get it in later today or tomorrow. Pictures don't do the seat justice. I will post more when I get it out of the SUV.

Re: 1965 LWB Stepside Build
 

Finally getting around to the master cylinder for the hydraulic clutch. I decided to paint the MC to make it pretty...just don't want it to rust. I also finally made my throttle linkage. I have had the parts for a while, but got it finished. I used a 5/16" brake line to cover the threaded rod....might as well paint it right? I think they both look good.

I need a second pair of hands to help me install the MC...but will get it done this week.

Slowly getting it put back together...one thing at a time. :)

Re: 1965 LWB Stepside Build
 

Got the clutch connected the brake MC...next is the brake pedal to the booster...then all 3 pedals will be connected...YAY!

Here are some random pics of the finished install and a better pic of the throttle linkage.

Re: 1965 LWB Stepside Build
 

I like the painted clutch MC. Also, nice trick with the brake line over the threaded rod. It definitely makes it look cleaner :metal:

Re: 1965 LWB Stepside Build
 

Thanks Christian...appreciate it. I really like the throttle linkage...gives it a pop under there.

Re: 1965 LWB Stepside Build
 

I wanted a "Crafty B", but couldn't justify the $ for it. Crafty B's are works of art though.

So instead I Got my new gas cap installed today. I used the same location as was on the truck when I bought it, just upgraded the cap to a Cobra style cap. I wanted something a little different than normal back there.

Re: 1965 LWB Stepside Build
 

Looking good man!

Re: 1965 LWB Stepside Build
 

Got some better pics of my new recovered seat and one of the new gas cap...well my wife took them. She is a better photographer than I am.

Re: 1965 LWB Stepside Build
 

What year seat is that from? DO you know or did it come with the truck,

Re: 1965 LWB Stepside Build
 

It came with the truck when I bought it, but obviously not original to my truck.
I researched months ago and determined the seat is out of a 71 based on the cover that was on it. This was the seat before I had it recovered.

Re: 1965 LWB Stepside Build
 

Thank you sir..much appreciated.

Re: 1965 LWB Stepside Build
 

So I ordered a threaded rod to finish my brake booster to pedal install...I ordered a 2 foot section. I only need 6-8 inches. This is how it arrived today. I thought for sure it was the wrong length!

The 2 foot rod came in an 8 foot tube! I also ordered a clevis pin and it came in a separate box both from the same location. I paid $5 total in shipping...they lost money on that, but I have what I need.

These are the things in life that make me laugh!

Re: 1965 LWB Stepside Build
 

Do you have pictures of how you did the fuel filler?

Re: 1965 LWB Stepside Build
 

The bed is still off the truck, so I haven't hooked it up to the gas tank yet. I "think" I am going to use a flexible fuel hose, but not sure yet. I will need to figure out the bends and length after the bed is installed. Both the Boyds Welding gas tank and cap use a 2" ID hose.

This is the one I bought for pictures and measurements.

PS--The hole was already in my fender from the PO and a generic fuel cap. I sat the cap in the hole and lined it up and used a spring loaded punch to mark 2 holes...Drilled and attached then marked the remaining holes and installed.

Re: 1965 LWB Stepside Build
 

Got the seat installed today. Need to get some more pictures, but I do like it lots. I had to install the steering wheel and shifter to make sure everything was going to work right.

Re: 1965 LWB Stepside Build
 

Moving right along...taking my drive shaft to be shortened at the end of the week.

While I wait on the driveshaft, I am going to start on the A/C install. I opened everything up today and pulled out a few pieces that needed painting. Two firewall pieces and the passenger side fresh air duct cover.

So I painted them today...will clear coat tomorrow. Here they are drying after 2 coats. Going to look "cool" when finished. :)

Re: 1965 LWB Stepside Build
 

Took my driveshaft in to have it reworked Thursday. I was told I would get it back this coming week, but they seemed backed up. Once I get the drive shaft in, will get the brakes bled and finish the hydraulic connections to my clutch MC to the trans. Getting closer!

Re: 1965 LWB Stepside Build
 

Moving along...installing the A/C while I wait on the driveshaft.

Re: 1965 LWB Stepside Build
 

Most of what I post in my thread is just for me so I don't forget things...and I use it as a timeline. I like going back and seeing what I have done and when.

While I wait on my driveshaft, I am trying to stay busy. So that was my task this afternoon. I have been wanting to do an electric oil gauge. I have seen a few threads where people used one out of an 81-87 Chevy Truck.

I pieced enough together to at least try to do what I wanted. I am not a welder so my welds are not pretty but are strong enough and they aren't seen.

I used an extra set of gauges I had, but will move the oil gauge over to my gauge later this week. This is the "finished result. I still need to paint the needle and reface the gauge.

I did enlarge the mounting post holes to 1/4" and drilled the middle post. The enlarged holes because it did not fit flush otherwise.

I am also going to do the same with a voltmeter I picked up at the same time as the oil gauge. The needle is different on the oil gauge, but I am OK with that.

Here are a few pictures I took while doing it. Took about 3 hours to do and I was winging it for the most part. I learned a lot and will do the voltmeter a little differently.

Will take more pictures after I finish it and put it in my finished cluster.

Re: 1965 LWB Stepside Build
 

"Final" Gauge Cluster..I added an Electric Oil Pressure Gauge as described above...and today I added a Voltmeter, since I don't trust the AMP meter that was in it and AAW doesn't support AMP meters.

I am going to paint the round portion of the Oil Gauge needle black so it blends better...

I hope to install the cluster in the truck in the next couple of weeks.

Re: 1965 LWB Stepside Build
 

That's a great lookin' cluster! While you're in there for painting the round part of the needle, have you thought about trimming the needle a bit to make it closer to the same length as the other needles in your cluster?

Re: 1965 LWB Stepside Build
 

Thanks Christian...I thought about trimming the needle...and probably will. I also need to paint the tach needle orange to be consistent also.

I also ordered a different oil pressure gauge that has the same kind of needle that is OEM that I am going to try. If it works like I hope, I may not have to cut the cluster piece.

I am doing John's cluster for him so I have time and a few clusters to play with to "perfect" it all. Then I am going to sell a few refurbished clusters.

Re: 1965 LWB Stepside Build
 

Nice! Sounds like you've got a good plan ahead

Re: 1965 LWB Stepside Build
 

Picked up my driveshaft yesterday afternoon and installed it this morning. Finally starting to feel like I am getting somewhere.

Now on to getting the brakes bled and the hydraulic clutch plumbing hooked up.

Re: 1965 LWB Stepside Build
 

Also received the other electric oil gauge in yesterday. I worked on it yesterday and finished it today. It was a little easier to put in and I like it a little more...so this one stays and the other goes to my friend. This one also came with the correct sending unit which is nice.

Re: 1965 LWB Stepside Build
 

Looks like it's going to be driving soon!

Re: 1965 LWB Stepside Build
 

Wow you have come a long ways buddy... That is going to be road worthy real quick.

Re: 1965 LWB Stepside Build
 

Thanks Scott your truck looks great! I just caught up on your build.

I got overwhelmed sometimes with the enormity of the build. I knew nothing when I started this and I still know most of it. :)

With the help of this board and all the good and knowledgeable members, I may just get her back on the road. My goal is to be moving forward and reverse and stopping by the end of the month...in the meantime finish the A/C install and start putting it back together.

John is milling my bed wood out of walnut...I need to nudge him I think. :)

Re: 1965 LWB Stepside Build
 

OK, so I got a new cut off tool and put it to use today. I am going to repair the radio hole in my truck, but also do some other stuff as well. I drilled out the spot welds on the ashtray hole and then cut out the opening. I am going to flush the hole and install my new center vent trim I got from Restomodair.com. After I cut the opening, I needed to see what it would look like. I LOVE this vent...I had been looking at it for a long time and finally bit the bullet and bought it. Now on to flushing the patch panel, cut the patch panel for dash installation and then cut and weld in the patch panel. Woohoo I am excited.

Forgot to add the pictures...

Re: 1965 LWB Stepside Build
 

On hot days like this...I am reminded of my favorite shop tool...a LARGE fan my dad put together back in the 50's. Like anything back then you made due with what you had. Large motor, fan blade and a Standard Oil cast iron lollipop sign base and post. I do not remember a time in my life without this fan. Moves a lot of air and looks great while doing it!

Re: 1965 LWB Stepside Build
 

Moving right along...cut out the patch panel for the ashtray to smooth out the dash. I don't think it is too bad of a fit for a first try. First time for everything...hope to get it welded next week.

Re: 1965 LWB Stepside Build
 

Sandblasted and sanded my door panels today...and got one painted. I need to fill in 2 unlevel holes before I paint the other. The PO had a door pull installed (cabinet pull) and it was not level...

I can't decide if I am going to paint the inner portion of the panel green or leave it all silver. Anyway...here is the passenger side panel painted and the drivers side ready for primer after I repair the hole.

Re: 1965 LWB Stepside Build
 

Continued painting the door panel. I masked it off and painted green to make it two tone. I really like the result. I also patched the 2 holes on the other door panel today, so hopefully get paint on that one this week. Here is the process I did to the painted door.

I used 1/4" tape to go around the edge where I wanted the stripe. All in one loop for each layer...then masked off the rest with blue painters tape. Then painted the green...3 coats and when the last coat was fresh, pulled the tape.

Now just need to clear coat it and it will be finished. I think the green will be a nice break on the silver door.

Re: 1965 LWB Stepside Build
 

The fan is way cool! Great idea for the panel, looks good.

Re: 1965 LWB Stepside Build
 

I like the green, that's a nice touch to break up the silver

Re: 1965 LWB Stepside Build
 

Dang man, love the build! Very detailed. Makes mine look way amateur! Another question for you, on your emblem restoration is the silver just painted?
Posted via Mobile Device

Re: 1965 LWB Stepside Build
 

Thanks, I like the panel a lot! I LOVE the fan. The best feature is if wasps are flying around, they usually get sucked into the blades and I see them lying on the ground near it...no more pesky wasps! LOL

Thanks Christian!

Re: 1965 LWB Stepside Build
 

Thanks for the kind words. This is my first ever build...I knew nothing when I started and still remember most of it. Thank goodness for this board and google/youtube.

The silver on the emblem is the factory plating. I just polished it some.

Re: 1965 LWB Stepside Build
 

Got the 2 holes patched in the drivers door panel and painted the silver today. Hopefully will get it masked and be able to paint the green tomorrow.

Also ordered copper nickel brake line today to finish the brake lines up to the proportioning valve from the Tees. I bought the Eastwood brake line flare tool so I am anxious to use it.