Re: 1965/73 Cheap Build Up
 

Ya'll are getting good at this. I'm proud of you guys.:lol:

Re: 1965/73 Cheap Build Up
 

They have learned well from the Master....:sumo:

Re: 1965/73 Cheap Build Up
 

Post the smiley the same as you would a picture. Copy & paste properties in the picture icon. ;)

Re: 1965/73 Cheap Build Up
 

Here's one I like.
http://wtriders.com/WTR/Smileys/default/mgun.gif ---------------------------:exit:

Re: 1965/73 Cheap Build Up
 

nope still cant get it to work
oh well

Re: 1965/73 Cheap Build Up
 

right click the smilie, copy image location, then click on this http://67-72chevytrucks.com/vboard/i...nsertimage.gif and paste in the window that pops up

Re: 1965/73 Cheap Build Up
 

I had to give it a shot. :lol:

http://www.musclecar-evolution.com/f...deadhorse5.gif

Re: 1965/73 Cheap Build Up
 

Allan, I like this one. http://www.musclecar-evolution.com/f...deadhorse5.gif

Re: 1965/73 Cheap Build Up
 

And this one. http://by138w.bay138.mail.live.com/m...160edbaa68a4b2

Re: 1965/73 Cheap Build Up
 

I just read this whole thing. My eyes hurt and I have to go shower of all the silliness. Good fun and great work. But now I feel lazy.

Re: 1965/73 Cheap Build Up
 

:jest: You must think we're :crazy: BTW Thanks

Re: 1965/73 Cheap Build Up
 

Attachment 477169Had to see if I could get it. My link is still kicking my a$$.:lol: I want it to just say "My build" not all the other stuff. Attachment 477169;) Thanks Joe Learn somthing new everyday. My computer skill have come along way since I started all this.

Re: 1965/73 Cheap Build Up
 

Attachment 477208Still could'nt get my link the way I wanted. I did manage to do this though. Just to get your morning off to a good start.:metal:;)

Re: 1965/73 Cheap Build Up
 

hey Dave, after you upload the pic, click on the paperclip again and click the attached pic (or insert all if you have multiple pics), that will insert it/them into the text and get rid of the attached image box around your pic

Re: 1965/73 Cheap Build Up
 

great do you know how to get rid of the stuff after mt build and still have it work?

Re: 1965/73 Cheap Build Up
 

That would do it.http://wtriders.com/WTR/Smileys/default/drool.gif

Re: 1965/73 Cheap Build Up
 

yeah, what you do is go to edit your sig, then click on the link dealy http://67-72chevytrucks.com/vboard/i...createlink.gif paste your link in the new window, hit ok, it puts it in your text field with the inside text highlighted, just replace the highlighted text with what you want it to show.....

daverod's build thread

like that

here is what it looks like without the last bracket

[URL="http://67-72chevytrucks.com/vboard/showthread.php?t=336798"]daverod's build thread[/URL

you can change the color, size, font, and make your text bold and italic like so....

daverod's build thread

here is what it looks like without the brackets closed

[URL="http://67-72chevytrucks.com/vboard/showthread.php?t=336798"][B][I][COLOR="Red"][SIZE="4"][FONT="Comic Sans MS"]daverod's build thread[/FONT[/SIZE[/COLOR[/I[/B[/URL

Re: 1965/73 Cheap Build Up
 

Thanks for the lesson Joe

Re: 1965/73 Cheap Build Up
 

no problem, i like people to learn something while I thread 'jack! ;)

Re: 1965/73 Cheap Build Up
 

It make it worth it. :lol:

Re: 1965/73 Cheap Build Up
 

Thanks joe I've been messing with it for days.:chevy: What up Dennis yours still looks the same.:lol: Well, at least it works now.

Re: 1965/73 Cheap Build Up
 

:thumbs:

Re: 1965/73 Cheap Build Up
 

Strodder---You guys aren't crazy, you're family. I came from a big family, so I'm use to 2 or 3 conversations at at time. And thanks for the booty shot Daverod.

Re: 1965/73 Cheap Build Up
 

nope im pretty sure they're crazy :lol:
not really





ok maybe a little
:lol::lol::lol::lol:

Re: 1965/73 Cheap Build Up
 

Did a little work on the truck this VERY HOT weekend. :devil: It was 110 here.
I welded up the hole in the blazer gas tank. I only had one small explosion :haha: Then I pressurized it and sprayed with soapy water. Then looked for bubbles. It was OK. Since I took the sensor out I could see the inside of the tank. Thank God there was no rust. But it had some rocks & pebbles in it. Also a gas can plastic spout laying on the bottom. :lol: I got them all out.
http://belair.smugmug.com/photos/595615253_y3hfd-M.jpg

http://belair.smugmug.com/photos/595615335_AbAYd-M.jpg

Next I Looked at the 2 engines I had for it. One is the 350 from the 73. I know nothing about this engine. I took the intake off to look inside, valves & lifters. It looked clean, but old. The engine didn't look like it was taken very good care of. I laid some of the fancy stuff I've been collection on the 73 Motor. Looks pretty good even with a dirty engine.
http://belair.smugmug.com/photos/595615571_94KCX-M.jpg

So I tore into the other 350 I had. I know the complete history with this engine because It came in my 1990 New Snap-on Box Van that I had to buy when I worked for Snap-on. It developed low compression at 130,000, but didn't burn any oil, and never leaked a drop of oil. It was a strong engine until the bad compression. I pulled lots of steep hills with the Van that was always over loaded. All it needs is a valve job. It was faster for me to install a new engine from the Chevy Dealer. It was only $1,800, and I was back on the road selling by Monday morning. I think I'm going to build this engine. BTW it's also a 4 bolt main.
http://belair.smugmug.com/photos/596015424_y9qE5-M.jpg

http://belair.smugmug.com/photos/596015474_Merin-M.jpg

Re: 1965/73 Cheap Build Up
 

Now I have to sell more crap to pay for the engine parts & machining. I'm going to have the block soaked, and get it power honed. Then a Edelbrock Performer RPM cam kit to go with the manifold I already have. I will port & port match the intake & exhaust ports. I do this with every Chevy I build. What I do works. I still have to take the valves out to see what condition they're in. Hopefully I can just lap them in. If not more money for machine work. It sucks when you don't have the tools. I always did my own valves, and used the shop equipment from where I was working at the time.

Re: 1965/73 Cheap Build Up
 

4 bolt main.:metal: Are you gonna stroke it?

Re: 1965/73 Cheap Build Up
 

I would like to. I don't have the money for that. The only thing I'll be stroking is...., well lets say use your imagination. :haha:

Re: 1965/73 Cheap Build Up
 

:ack:

Re: 1965/73 Cheap Build Up
 

You have a dirty mind. :haha:

Re: 1965/73 Cheap Build Up
 

This might help.:lol:

Re: 1965/73 Cheap Build Up
 

:lol: http://www.ls1.com/forums/images/smilies/jerkit.gif :lol:

Re: 1965/73 Cheap Build Up
 

Now quit that. I'm trying to think of what to do next. :lol:

Re: 1965/73 Cheap Build Up
 

Oh I remember now. Go to the beach.

PICTURE REMOVED BECAUSE IT SHOWED SOME OF THE NICEST BOOBIES YOU EVER SEEN.
Sorry it's the rules.

Re: 1965/73 Cheap Build Up
 

I like the beach.

Re: 1965/73 Cheap Build Up
 

you had better put a top on that woman before you get your p-p whacked :lol:

IBTL

:lol:

Re: 1965/73 Cheap Build Up
 

Is that a No, No http://wtriders.com/WTR/Smileys/default/icon_shrug.gif

Re: 1965/73 Cheap Build Up
 

Naw, I think it is a go go. (dancer that is) :haha: Edit the pic and put some pasties on them thar boobies. ;)

Re: 1965/73 Cheap Build Up
 

What a shame to cover those beauties. Besides it too late to edit. :but:

Re: 1965/73 Cheap Build Up
 

ha
actually they made the edit feature where you can edit anytime
i wouldnt change it though :thumbs: