Re: Got a new truck
 

Everything pretty much except cab, frame, motor and the half-tons. We might not be able to re-use the rear link bars, because they maybe too long.

Re: Got a new truck
 

Sorry to see the truck go but if a 4 seater is what ya want then build it nice job..

Re: Got a new truck
 

The frame was cracked to where it would be easier and a lot cheaper to build a new one than redo this. And while building it this is what I will be trying to make a buggy out of a cab like this.

http://67-72chevytrucks.com/vboard/a...1&d=1147658207

I have the cab in the garage and the roof from this. And am getting another cab, to try and build a 4 door cab. This time it will be build a lot safer and hopefully it will perform better. It will be all thought out, and tacked together then make any changes we feel is needed before final welding.

And a pic of the motor. It will get a set of headers instead of the stock mismatched manifolds
http://c2.ac-images.myspacecdn.com/i...6b1fbfa8d9.jpghttp://c1.ac-images.myspacecdn.com/i...27e0c249f8.jpg

Edit: I know your thinking they just painted it orange and cleaned it and said they rebuild it. But My dad knows and helped rebuild it a few years ago to my understanding and just sat till we bought it.

Re: Got a new truck
 

how long is your wheelbase gonna be?

Re: Got a new truck
 

I think around 140 maybe a bit longer. About the 10 in longer than the pic earlier. At longest 147 which a truck had on pirate. It was a newer crew cab on 47's.

When I first added it up it came to like 140 but that should be a little longer than actual.

Re: Got a new truck
 

After last night the truck was in two pieces.

http://c1.ac-images.myspacecdn.com/i...7b582e2a1c.jpg

Re: Got a new truck
 

Well the trucks is completely apart. But, it is going to be another week before we get the other Truck. It is a 3/4t, with a 327/4speed. So won't have any updates for a little.

Re: Got a new truck
 

Well I gave up, on building the 4 door for now. We will try to make it after the buggy we are going to make is done.

The buggy we are going to build will be similar to this one.
http://i306.photobucket.com/albums/n...DSC00737-1.jpg

Re: Got a new truck
 

Keep up the great work! It sounds like you should have yourself a great wheeling machine when you get done!

Re: Got a new truck
 

Are you gonna put any sheet metal back on it?

Re: Got a new truck
 

We will make some panels once we're done.

And we started last night, but made no progress. Just bent the sub frame bars, but the bends were crooked. We need a degree finder, which we are getting today after we turn in our cans.

Re: Got a new truck
 

Well this is what I got done yesterday.

http://c2.ac-images.myspacecdn.com/i...665b81e95d.jpg

Re: Got a new truck
 

Well we started over on the frame. And this is what it looks like, 58 and 3/8 wide inside to inside.

http://c2.ac-images.myspacecdn.com/i...93557f09fd.jpg

Re: Got a new truck
 

Well I was working on it today, and found my wheelbase will be around 130, unless we cut down the front of the frame to bring the axle back some and still be pretty low, so we can get in the garage.

So should I leave it at 130 or cut the frame and get closer to 120?

Re: Got a new truck
 

Well we shortened the frame 10 inches. And tonight we are going to Make the rear b pillar, and hopefully get the a pillar done also.

Re: Got a new truck
 

good choice.. 120 is even a little long for the stuff i think you want to be doing... My long box sits at 128... i will be shoring that up to about 120/118 when I link it...

Re: Got a new truck
 

I was hoping 120 would be good. My longbox is 128 and is a little long but make pretty much everything that the tire size allowed. And I could even get a big bump if I didn't make it cruising, but that caused some broken parts.

The truggy was at 108ish, pretty close to factory shortbox. And was great no problems made everything that the tire size allowed, and was able to make the tighter trails easy. But, Could have been a little longer for a little bump and a little stabler.

So this will be the middle ground and hopefully be great.

Re: Got a new truck
 

Well this is what we have done so far. I measured for headroom and it will be aprox. 7 inches. The passengers side bar is tacked and the driver's is bent and just needs to be notched on one side.

http://c3.ac-images.myspacecdn.com/i...871ca18ebe.jpg

Re: Got a new truck
 

Well we got the driver's side thing and the center (dash) bar tack in also. We have the top roof bar bent (the bar above the dash, don't know what to call it) cut, bent and one side notch and the other side halfway notched, but then drill burned up. So we have to get this one replaced then more updates.

Re: Got a new truck
 

hey you want a newer blue grant gt steering wheel for that thing? ive got an extra i'll let go cheap

Re: Got a new truck
 

I already have a wheel.

Well today we got some more steel and got the top bar on and my dad is making the trans cross-member right now.

http://c2.ac-images.myspacecdn.com/i...d75bd7d64d.jpg

It is not that angled down, We don't have jackstands tall enough for the sub frame to sit level, at ride height.

Re: Got a new truck
 

when i dont ahve tall enough jackstands i make "feet" for them with 2x4's.. that's how i got my truck stands tall enough to get to the frame of the chevy..

Re: Got a new truck
 

We were going to do that today, but instead we lowered the frame to full bump so the jackstands will fit. We are now working on the back half and motor mounts. I will get a pic latr.

Re: Got a new truck
 

A few pics.

http://c3.ac-images.myspacecdn.com/i...22cb3d4112.jpghttp://c1.ac-images.myspacecdn.com/i...5846124b54.jpg

Re: Got a new truck
 

its lookin good

Re: Got a new truck
 

Thanks.

Today we just made tabs, and made top bar for the back-half. Tomorrow we will make the other bar for the back-half and the roof bars.

Re: Got a new truck
 

Re: Got a new truck
 

My dad got it almost to be a roller today. Just need to mount the shocks and there tabs.

Re: Got a new truck
 

a few pics, we clearly have a vision problem, but the shocks aren't in the way the carb and air cleaner are.
a rough idea
http://c1.ac-images.myspacecdn.com/i...8079e902d4.jpghttp://c4.ac-images.myspacecdn.com/i...9eac4b2adb.jpg

Re: Got a new truck
 

is there any way to lower your motor mounts, thus lowering your running gear/ COG and giving you a clearer line of site? Your shock hoops will stick up but thats pretty common.
Its seems that your air cleaner will sit flush with the roof as it sits now. I would probably make a new crossmember for the block something like this http://i77.photobucket.com/albums/j7...smember-40.jpg
and if you clock your TC it shouldnt change your driveshaft angles to terribly. I assume you are running hi angle drivelines anyways so it should be all good. IDK man, if it were my buggy I would.. You've done a lot of work to leave your carb/intake/air cleaner at risk in a rollover. From what I can see it looks pretty good otherwise. Some side view pics would be cool, but I see you have limited space (I work out of my garage also :lol:)

Re: Got a new truck
 

were getting the seat in place and then lowering the motor if need As it sits it is at the center of the windsheild area.. The shock are going down 4ins and that is a hih rise and we're going to use a low rise.


And the cog should be extremely low as it is.

Re: Got a new truck
 

well we haven't done anything for a little but we are gonig to work on it this weekend hopefully, a roller.

Re: Got a new truck
 

well the fronts almost a roller, and back still needs work but a updated pic at pretty much ride.
http://c3.ac-images.myspacecdn.com/i...1edc503306.jpg

And a little of the plan for the front.
http://c1.ac-images.myspacecdn.com/i...432a8084c4.jpg

Re: Got a new truck
 

well we restarted , we started taking everything off, so i could get more head room and better leg position. I will get pic later.

Re: Got a new truck
 

Still working on it slowly, we flexed it tonight and found we need to work on the shock clearance, so after it done more pics.

A bad one
http://c1.ac-images.myspacecdn.com/i...d395390708.jpg

Re: Got a new truck
 

we need some daytime shot of this thing!!!

Re: Got a new truck
 

yup, we have been slacking. I will get some garage pics of it tomorrow as it sits. We still need to do a lot.

Re: Got a new truck
 

Well a lot has happened personally, so no progress. But today My dad and I worked on the black truck and will get some wheeling pics tomorrow.

Re: Got a new truck
 

Well went to hollister and the hubs gave us problems and the passenger rear tire blew a bead so didnt do much.

Re: Got a new truck