Re: What did you do to your truck today?
 

i was super broke when i bought the paint. so i had them make them in rattle cans two cans 60 bucks. i already had plenty of clear so that was not a problem and i had the metal flake. i made a flake gun and got busy. this is really the first paint i have shot. i'm pretty proud of it.

Re: What did you do to your truck today?
 

we paid 90 a quart

Re: What did you do to your truck today?
 

yeah they wanted 150.00 and i just did not have the coin. this all started because the windshield gasket was leaking. and here we are. this truck is supposed to be my daily some times i can't leave well enough alone.

Re: What did you do to your truck today?
 

Did some grinding on my front inner fender patch after I locked myself out of the house and had to wait on the wife to get home.

Re: What did you do to your truck today?
 

That flake work is impressive, especially for a first attempt. There probably isn't anybody on here that knows how to leave well enough alone. One thing always leads to another.

I remember when I got my 46 Ford back in the 80's. I was just going to steam clean the engine compartment and drop in a small block Chevy. But as long as I'm in there, might as well clean up this one thing. Next thing I knew all there was in front of the firewall was a pair of bare frame rails! Same thing with my truck, started a repaint a decade ago, and next thing there was nothing but an empty cab sitting on the frame. Took a year to paint everything and put it all back together.

Re: What did you do to your truck today?
 

Drove the beast to work in the AM. came home in the dark and lost both the low beams. People really like the high beams, i know cause they flashed their lights at me, a lot! Got home and checked the dimmer switch and all is ok, so in the AM I will start the wire tracing. This ought to be fun.

Re: What did you do to your truck today?
 

wow your first post
:welcome2:
you will like it here
lots of good information
i hope you figure out your lights

Re: What did you do to your truck today?
 

NelsonMahrt:

Welcome to the forums from Kansas City, KS.

Don't forget to post some pictures of your rig or the "polaroid police", aka Joe, with issue you a ticket.

Enjoy the ride...this site is the foremost location for all things '60-'66 Chevy truck related.

P.S. - you look very young in your avatar photo to be posting on the internet...you must be a child prodigy!

Re: What did you do to your truck today?
 

:haha:

Re: What did you do to your truck today?
 

now is the time to upgrade to relays

Re: What did you do to your truck today?
 

Thanks for the greatings! You will more than likely regreat it cause this is my first project truck and I know I will ask a ton of questions. The ride is a bomb, bad wiring, lots of body work needed, sloppy stearing, wiper that dont work and park in the up position, heated by the holes in the firewall, loud, but the good side is, it has a 350SB with a 2 speed powerglide that run, ok. I think I will try to write and photo the rebuild, but it will take some time as this and a Harley are the only transportation I have and like most of us money is tight, (girl friend, 2 dogs, a cat, and an Ex.) As far as the "child prodigy" thing goes it's just this Texas Air and lots of burbon.

Re: What did you do to your truck today?
 

Took the beast out on its maiden voyage yesterday...SWEEEEEET...lots of stuff left to d0...figure out all the vacuum lines and get it shifting properly...

Thought at first that tranny was leaking out the dust pan and was not to happy about that....BUT with a little more research i found that the oils pressure sensor wasnt screwed in tight enough and was leakin down into the pan..... BIG SIGH! We'll be drivin it daily soon....

HIGH FIVE!

Jory:chevy:

Re: What did you do to your truck today?
 

Fixed the oe turn signal switch swaped out antenna, and started sanding down dash

Re: What did you do to your truck today?
 

I got the 63 rear suspension all finished up today. Installed ECE shock relocator kits. Built all new brake lines for the back half of the truck.

I also rigged up a temporary fuel tank so I could start the engine. Found bad deal. When I assembled the new engine into the truck, I forgot to change the throwout bearing. The original throwout bearing was the long one and my new clutch needs the short one. So, my clutch is stuck disengaged. Friday I will have to pull the trans and swap the bearing to the right one.

Re: What did you do to your truck today?
 

UPS guy came bringing more parts. He always has to check out the progress as he stops here fairly often. Happy Thanksgiving everybody!!

Re: What did you do to your truck today?
 

I'm happy to see such a great response to this thread!! :metal::metal::metal:
Keep them coming!
Happy Thanksgiving everyone!

Re: What did you do to your truck today?
 

It's been almost 7 years and I finally started the old wore out bone stock 350........cough, cough.
Run it for about 20 minutes tonight and broke the cam in, motor sounds very, very, healthy.

Re: What did you do to your truck today?
 

is that carb workin good :D

Re: What did you do to your truck today?
 

Oh yea........very quick throttle response........

Re: What did you do to your truck today?
 

My '66 C20 used to do that once in a while. A couple of the wires to the dimmer switch would burn in two. I attributed it to my typical leaky windshield dripping water onto the dimmer switch all the time. I finally got that fixed.....then the engine locked up. :(

Re: What did you do to your truck today?
 

Loaded Jon C's big back window cab and some other items. Headed from KC to Alabama on Thursday night/Friday morning at 1:30 am. Twenty-one hours, round trip. Should be lots of fun.

Re: What did you do to your truck today?
 

Started installing new bucket seats in my 65 SWB SS. Made seat brackets out of 11 ga. 1-1/2 square tube and 1-1/2 x 1 rectangular tubing.

Next up is retractable seat belts..... then interior paint.

Happy Turkey Day Gang!

(and thanks to Markeb for his internet help with the seats)

Re: What did you do to your truck today?
 

OK here are the pics I put the bumper on painted it remounted the plate remounted the drag plate and got some 65 style caps
http://i623.photobucket.com/albums/t...gon/img001.jpg
http://i623.photobucket.com/albums/t...n/img002-1.jpg
And my lil girl on her girly Lowrider bike...
http://i623.photobucket.com/albums/t...gon/img003.jpg

Re: What did you do to your truck today?
 

Drove the farm truck for the first time today. I still need to finish the gas tank and install the seat, bleed brakes, align the front end and install the wheels. New wheels and powdercoated grille and bumpers are going to make the difference.

MarK bed wood and strips to be here some time next week.

http://i276.photobucket.com/albums/k...rmtruck061.jpg

Re: What did you do to your truck today?
 

Twenty years ago when I started goofing with old trucks, I would put Saddleman saddle blanket type seat covers on my trucks. They were very durable and lasted forever.

On this farm truck, I wanted to run one like I did back then. Everywhere I looked though, all I can find is thin versions of the old saddle blanket covers. Finally, I found a guy on ebay who makes them. I was pleasantly surprised when it arrived. It's at least the weight and thickness of the ones I bought in the 80s. The downside is that it has some funny corner flaps on the front sides of it. The girlfriend says she will sew them down for me.

The seat is a 73-87 Suburban middle seat I think. It's a bit narrower than most bench seats, allowing a bit of room between the edge of the seat and the doors. I spent some time lowering the brackets even more. I like my seats real low.

http://i276.photobucket.com/albums/k...rmtruck063.jpg

Re: What did you do to your truck today?
 

I changed the oil on my '46 for the first time since I've owned it. Good thing I did because it was BLACK! Whoever the A-Hole was that put the oil filter on last time put it on SO FRIGGIN TIGHT, I destroyed the filter; well, I caved it in with my filter wrench and broke the wrench in doing it! Anyway, its belly is full of nice clean oil now. NEXT...

Re: What did you do to your truck today?
 

Kevin at times I get exhausted just reading all the accomplishments you get done in one day!:lol: Very impressive. Your truck looks great. Looking forward to seeing it with the powder coated parts.

My big truck adventure today was pulling the car cover off and taking a 15 minute drive to make sure the STA-BIL got circulated up to the carb.

Re: What did you do to your truck today?
 

I know that guy gets so much crap done i feel lazy over here lol I need to get off my @$$ and off this site that keeps me up all night!;)

Tx Firefighter love that Avatar

Re: What did you do to your truck today?
 

Once again, I am not able to download photos because my Sprint MiFi card can't keep the connection long enough...note to everyone, don't give Sprint a dime of your money...this and their other phone services are terrible. I can't wait to be done with my contract!

Anyway, I left Kansas City at 8:30 pm on Thanksgiving evening and drove 655 miles in 11 hours to Moulton, AL, to deliver the big back window, A/C cab to Jonathan Cross. I arrived at 7:30 am, took a few hour power-nap, drove to his place, unloaded, chatted about trucks for a while and headed back to KC. I just walked in the door at 12:00 midnight. 1,330 miles and 21.5 hours of driving in the last 27.5 hours. I should sleep good tonight.

Re: What did you do to your truck today?
 

Brian:

Your rig is looking good.

Re: What did you do to your truck today?
 

Well today I went to an autowrecker about an hour from
My house. My friends dad and I went there looking for front fenders and although there were 6 different trucks I had no luck as all were rusted out. I did however, manage to find a factory rearview mirror from a 64. I'll be putting it my 62 as I've been looking for one for nearly 2 months. Just wondering though, how much would this one be worth? It's in fair condition, although it needs a good polishing. The rivets also have surface rust on them.

Re: What did you do to your truck today?
 

Well I didn't really get much done to it today. Painted the hood up to make it more presentable. I'm moving at the end of next week and until I get it into the garage I don't want it to be an eyesore to the new neighbors. I also started putting misc. truck parts in the rear of it to take to my new house. Gas tank 3 batteries a set of heads bunch of tires and rally rims. The suspension is officially gone. Its sitting on the bump stop brackets. Tomorrow I will finish the steering and try to get the brake lines on for temp brake lines and put some gas in it so I can drive it to my new house.
I can't wait to finally have a garage:metal::metal::metal:

Re: What did you do to your truck today?
 

Scraped foam off the ceiling of my 'burb....PO's upholstery job. Need to get the leaf blower out again as the dust is building up:lol:

Re: What did you do to your truck today?
 

today i changed the Wheels and the Steeringwheel......



before.......

http://up.picr.de/3312026.jpg

after........

http://up.picr.de/3312027.jpg

and before......

http://up.picr.de/3312029.jpg

and after.....

http://up.picr.de/3312028.jpg


Pat

Re: What did you do to your truck today?
 

Your Suburban reminds me of one I used to own.

http://i276.photobucket.com/albums/k...s/DSCN9912.jpg

Re: What did you do to your truck today?
 

I wrote the date in the dust. Next week it gets attention

Re: What did you do to your truck today?
 

Tore the seat on the 65 taking pictures (guess it does not like the snow :lol:)

Re: What did you do to your truck today?
 

I spent the morning busting down my old wheels and tires and installing new wheels. It took me awhile because I do my tires by hand and it's pretty hard work dismounting tires from the old rally wheels.

http://i276.photobucket.com/albums/k...rmtruck075.jpg

Re: What did you do to your truck today?
 

DAMN thats the same truck

Re: What did you do to your truck today?
 

It's been 1 month and 8 days since I got it.

In that time, I have converted it to 84 front end, all powdercoated and rebuilt.

Got a used engine and trans which I cleaned and refreshed,

http://i276.photobucket.com/albums/k...rmtruck025.jpg
http://i276.photobucket.com/albums/k...rmtruck044.jpg

Converted the rearend to 72 model 5 lug, ECE lowering stuff, all new brake lines front and rear.

I'd have done it faster but I keep get covered over with powdercoating jobs. I quit advertising at all or even trying to get work but people keep driving up and dropping off jobs just the same.

http://i276.photobucket.com/albums/k...rmtruck004.jpg

http://i276.photobucket.com/albums/k...rmtruck082.jpg