Re: 1965 chevy truck one piece @a time
 

couple more i=of the tires and the headers mounted
have to have the headers modified on the driver side of were it was going to hit
they are chevelle headers :lol:

Re: 1965 chevy truck one piece @a time
 

:chevy:couple more

Re: 1965 chevy truck one piece @a time
 

:ito:

Re: 1965 chevy truck one piece @a time
 

Like what Im seeing.
That 572 and those tires are gonna lay down some big'ol fatty black marks.

Re: 1965 chevy truck one piece @a time
 

Got to keep an eye on this one looking really good

Re: 1965 chevy truck one piece @a time
 

Thanks should have some more updates pics after work maybe
we had to change out the backing plates and drums due to them hitting the wheels on the inside .:banghead::m6:should have went with 16inch wheels instead :waah:
going to use caprice backing plates and drums that are 5x5

Re: 1965 chevy truck one piece @a time
 

Nice work on the big block install....I start mine on April 25....so looking forward to some of the same mods. Keep up the updates

Re: 1965 chevy truck one piece @a time
 

here is an picture update here is a couple of pics of the old backing plate and the ones that had to be modifide from the caprice backing plates to fit the wheels .. had tooo widen the hole to side it over and end of the axle and redrill the holes for the bolt spacing used the 90-96 caprice 5x5 and drums all new hardware and not running an e-brake :chevy:also mounted the new adjustable rear pan bar .. cant wait to put the bed back on to see how the wheels look under the rear fenders to see it we need stiffer shocks:sumo:

Re: 1965 chevy truck one piece @a time
 

also today got the fuel lines run and filter and electric pump mounted
need the cab back to them so we can get the fuel regulator mounted and
get the brakes going :uhmk:

Re: 1965 chevy truck one piece @a time
 

spent the day painting the fire wall will load it monday nite if not raining to take it to the shop to put all the stuff on the fire wall and the inner fenders :metal:

Re: 1965 chevy truck one piece @a time
 

:mm: paint dried over night:metal:

Re: 1965 chevy truck one piece @a time
 

nice job....paint looks great

Re: 1965 chevy truck one piece @a time
 

:metal: Thanks its back at the shop should have in on the frame tonite after work .
Will see where its at should have some update later this week :chevy:

Re: 1965 chevy truck one piece @a time
 

ok here is some updated pics form the shop tonite
took the cab in on Tuesday morning. and Thursday nite to this :chevy:

Re: 1965 chevy truck one piece @a time
 

here is a couple of pic's from Friday nite hope you like um :metal:

Re: 1965 chevy truck one piece @a time
 

went by the shop to night for a little update .. dropped of the gas tank before
work and here are a few pics of whats going on .
looks like ill have to roll the inside the fender or go buy a little wider fender out of fiberglass. looks like i ve got some peaces hiding:lol::metal:

Re: 1965 chevy truck one piece @a time
 

:chevy:

Re: 1965 chevy truck one piece @a time
 

:chevy:

Re: 1965 chevy truck one piece @a time
 

Just a little update took some shots last nite and went by tonite waiting on the power steering lines and the trans cooler .. the oils been changed and
antifreeze put in
hoping to have it running monday nite ..
then finish up the bed . they will have to roll the lip on the fenders to clear the side walls of the tires :metal: just a little snug :lol:
hope to have it home in time for the three day weekend at the end of the month

Re: 1965 chevy truck one piece @a time
 

Wow! Nice! :chevy:

Re: 1965 chevy truck one piece @a time
 

here is some pics of this weeks update so far.. hope you like um some of the new power steering lines
getting close to firing it off ..
parts that are on order hope to get them thursday
1 set of super 44 flow masters
2 trans cooler and lines
3 bed bolts and tub welled bolts
4 steering coupler
and other stuff :chevy::metal:

Re: 1965 chevy truck one piece @a time
 

went by the shop too night too see how they were doing on the
muffler set up .. had one side mocked up and tacked in ..
3 in exsulst all the way back with supper 44 flow masters sill waiting on the fitting for the trans cooler hope to have it running Friday night hope to post a video
will see what happens .
need to go back up there to marrow night and bring the seats home to clean them up and get other stuff out of there way :metal:

Re: 1965 chevy truck one piece @a time
 

I hope you have planned on some serious brakes on this thing...gonna need'em with that big block! :metal:

Re: 1965 chevy truck one piece @a time
 

Its alive and moving :lol: sorry for the long not updating .. the trucks about to come home .. they have a couple of lose things to adress and small leaks to take care of.*& like mount and roll the fenders which are loaded and ready to drop off tomarrow .
but here is a few of whats been going on and what it looks like as of tonite

Re: 1965 chevy truck one piece @a time
 

It looks like were going to have to split the rear fenders and widen them about and 3/4 to an inch wider to get the tires to fit under the fenders .. :banghead::drama: any way i'm going to use the old fenders and cut spacers frome them and have and extra set of steps to match the mod also .
another step back wards but hey that s part of the fun just more money ..

Re: 1965 chevy truck one piece @a time
 

here is the rest of the pics of the spacers i'll strip them in the morning
then off to the shop.
and then jump back on the doors in the after noon :chevy:

Re: 1965 chevy truck one piece @a time
 

went and stoped by the shop tonite to see how they are wrer doing on the spacing of the fenders . they are about an 1 5/8's wider now over stock
and still in side the cab body line so there not sticking out . its going to be hard to tell unless they know what there looking for :metal::chevy:
had to do some slide mods to the fender to match up . but when finished i
hope it won't be noticable

Re: 1965 chevy truck one piece @a time
 

I've thought of doing mine that way, but I also like the way Lakeroadster did his. He just widened the whole box.

Re: 1965 chevy truck one piece @a time
 

Those fenders are going to be tuff lookin

Re: 1965 chevy truck one piece @a time
 

Looking good! Those fenders are cool! You could go to a dually setup! LOL! :metal:

Re: 1965 chevy truck one piece @a time
 

ok here is the passanger side pics had to reload them didn't know they were sided ways so i needed to rotate them up :metal::ito::sumo::chevy:

Re: 1965 chevy truck one piece @a time
 

They look great!

Re: 1965 chevy truck one piece @a time
 

Those look great.

Re: 1965 chevy truck one piece @a time
 

Thanks Bomp and found her 25 years later . im glade there not sticking out past the cab.
i hope they will have the drivers side done tomarrow nite the the steps done
Friday so i can take it home and get the doors and fenders on and get it on the road . will see what happens :chevy:

Re: 1965 chevy truck one piece @a time
 

thanks i see your pride and joys coming along too keep up the good work :metal:

Re: 1965 chevy truck one piece @a time
 

Thanks.
Widening the bed or fenders is something I want to do.
I like how simple Lakeroadster made it look widening just the bed; http://image.hotrod.com/f/Lakeroadst...c10-swb-ss.jpg
But I like the beefy look of your wider fenders.

Re: 1965 chevy truck one piece @a time
 

here is a couple of the pics of the driver fender and the passinger side before they put it on the truck :chevy:

Re: 1965 chevy truck one piece @a time
 

Hi here is a couple of pics of the fenders on the truck with the widen step to match the fender . it was cut with an spare step i had used just one step .and used 1 5/8 of the metal on the widing of the step and fender . hope its
not raining tomarrow nite it is coming home :metal::chevy: and just added about 2 inches to the step brace at the end and redrilled the holes for the steps .

Re: 1965 chevy truck one piece @a time
 

Coming along nicely.
I really like the beefy wide fenders.

Re: 1965 chevy truck one piece @a time
 

truck is looking great, keep it up