![]() |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
I better get something done, maybe some body work.
|
Re: What did you do to your truck today.The 3rd chapter
If you don't do it ^^^^^^^ no one will :)
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
5 Attachment(s)
Picked up new Schott wheels, one piece window kit, all the tailgate trim, billet radiator support brackets, complete 3" exhaust pipe kit, 3" v-bands, and fire sleeve
|
Re: What did you do to your truck today.The 3rd chapter
Today, on my '71 Jimmy, I R&R'ed the Fuel Filter and replaced the 3/8'' hose connecting it to the carb. I also reattached the lid on my center Console. All 3 screws had worked loose and the lid was flopping all over the place.
I looked into changing out the gasket on the Fuel Sender in the '68 C/10 Stepside. Since I changed out the float last year, the tank was leaking fumes into the cab. Especially when filled up. I had pulled about 9 gallons from the in-cab tank -- syphoned into jerry cans -- so I could operate, but the Special Tool I bought from LMC to remove the sender, lock ring and gasket was nowhere to be found. |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
:lol:After a month or so of phone calls and e-mails my seat saga has been resolved . I received three yards of the Dark Fawn material today to redo the 68 seat back. Free of charge they also sent me a check for the estimate from my upholsterer to do the repairs . So all in all I’m happy with the outcome . I’ll post when the seat is fixed most likely a month or so as the shop is extremely busy at this time . Color is dead nuts .
I think they just wanted me to stop calling:lol::lol: |
Re: What did you do to your truck today.The 3rd chapter
Right on Mark, glad to see it :)
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
I've been spending time in the garage waiting for the weather to get better, and polishing the stainless bed bolts and reinstalling. Might even do all of the strip bolts as well.
|
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
I had my original AM Radio redone so is now AM/FM and has Blue Tooth with a built in microphone so can talk hands free. It was recommended by the builder that I use a fixed mast antenna for better reception on the AM so today ordered a complete new fixed mast antenna kit. My truck has the original telescoping antenna now.
|
Re: What did you do to your truck today.The 3rd chapter
I looked up the company on the sticker of your radio and they say they are only Mopar and AMC. How did you get them to do your radio?
|
Re: What did you do to your truck today.The 3rd chapter
Well played on the radio, I see the builder is in Ontario ........... cool
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
https://classiccarradiorestoration.com |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Took it to the shop to have the Hydro Boost installed. Ever since putting in the Vortec the brakes have been somewhat questionable. The booster was checked and found to be good. Motor just didn't produce enough vacuum with that cam.Should have it back tomorrow.
|
Re: What did you do to your truck today.The 3rd chapter
Brought home my new 1970 C-30 Dump truck. about 2400 mile round trip to Virginia with my flatbed. I would strongly recommend anyone on the east coast avoid Pennsylvania and New York on I-81 and I-84 at ALL COSTS with a trailer. Massachusetts I-90 is not congruent with towing either. I shot up I-91 into Vermont to exit 3 and cut across New Hampshire. Beautiful ride. My 2500 Diesel preformed and towed flawlessly.Fortunately no mishaps at all (other than a trailer license tag flying off in PA whilst banging about on the beautiful roads), just those states listed above got terrible roads, and 2 of them charge money to ride on em. I've tried everything I know to post a photo. Sorry, beyond my skillset, or an Apple doesn't play well here. Once I get the road off me I'll figure this photo stuff.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Started to put the bed wood back in hopefully for the last time . I thing I got some grinding dust on it and with moisture it turned the wood a blackish blue . I get the same when I’m milling any type of oak . Just the blade hitting the wood causes the tannins in the wood to turn blue . This time I used spar urethane to seal it not just an oil finish like before
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Installed new steering wheel today. I can steer this thing a little better now since the wheel itself is smaller.
|
Re: What did you do to your truck today.The 3rd chapter
^^^^^
Very Nice! |
Re: What did you do to your truck today.The 3rd chapter
Still working on the photo thingy. Years ago I used to post on here using photo bucket. I'm asking my distinguished panel of experts now!
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Replaced the vent windows and weatherstripping.
Cruise time! |
Re: What did you do to your truck today.The 3rd chapter
5 Attachment(s)
Not really on the truck but I've been trying to make a decision on fabric for the door panels on my 67. I just haven't seen the perfect one yet.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Other than doing the driveway shuffle so our company has plenty of room to park for Easter Dinner , I've done nothing.
|
Re: What did you do to your truck today.The 3rd chapter
What I did:
The gate sweep on my 4 speed Hurst shifter seemed to be off a little when moving R to L in neutral. Turned out the shift lever on 3&4 had pulled away from the tranny. Cause — the bolt that secures it had loosened somewhat, so I pushed it back in and retightened. The gate is perfect now. |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
The polishing continues before show season out here in the PNW
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Installed new Steele Rubber push on door seals last week and took the truck on it's longest drive since putting it back on the road. Wife and I made a 104 mile round trip to deliver some LED shop lights to a buddy. Been making 30-40 mile trips regularly and have a couple of trips planned for June/July that will be longer so stretching its legs a bit.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Got the motor drained of all fluids, wiring harness removed and shift linkage disconnected. Going to be pulling the motor in the next couple of weeks hopefully!
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
First day running the a/c and its such a nice upgrade. only in the mid 90's today but truck did great. Might need to tint it but it kept it nice and cool all day today.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
What happened to spring? We go from cold and wind to hot and wind . [flip for you]
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
Looks great. Source / link? |
Re: What did you do to your truck today.The 3rd chapter
pulled down and out the 23 year old checkered spare tire that wouldn't hold air, found a very nice used replacement, mounted it, stuck 'er back up underneath, and topped it off with a new repop carrier nut - it had just a standard nut before.
|
Re: What did you do to your truck today.The 3rd chapter
5 Attachment(s)
Started the process of rebuilding a set of buddy bucket seats.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
:lol: |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Went to replace the rear brake hose, crimped the snot out of the hard line(front to back) instead, so I started unbuttoning that line and making a new one.
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Started to cut up my new carpet to install the seat . Using an old set of brackets to mark it out
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
The Jimmy needs new seats badly. The ones the PO put in are out of a Firebird/Camaro car from thre mid-80s. The foam was molded around the springs, and it's shot. Sharp pokey things pop up into one's posterior. And at the rear, the brackets are lag-bolted into 4''x 4'' blocks of wood. A head on collision will be fatal. It's the '67 Suburban, I'm thinking of Buddy Buckets in. Shotgun rider could ''lay aft'' and check on the load, [or retrieve a cold one] from the back while underway. Current stock '67 vintage bench seat is OK. Would be great after reupholstering. Just kidding. Keep your seats. You found them. You build them. Only fair. |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Tilt column and 15" OE style wheel
|
All times are GMT -4. The time now is 03:32 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com