Re: Project Vitamin C-10
Cool pics thank for sharing!
|
Re: Project Vitamin C-10
"It was Gaitlinburg in mid-July, I'd just hit town and my throat was dry, so I thought I'd stop and have myself a brew..." A Boy Named Sue, by Johnny Cash.
As soon as I saw you post that, that song came to mind LOL. If I am ever again down in that neck of the country, I will certainly look that Stars Cars place up!! I probably would have filled the camera storage up just in that place alone, not to mention the scenic shots you took too!! I bet it was a great trip. |
Re: Project Vitamin C-10
Alan, You look good sitting there in the General Lee !! Was Daisy Duke available for pictures???
|
Re: Project Vitamin C-10
great pics Alan...i've been on multiple family vacations to the Smokies (Gatlinburg/Pigeon Forge) through the years...my dad used to take us up for the All Chevy/GMC Truck Nats. as well...would love to take my truck up there sometime for a cruise...my wife and i got married last year, & we hope to make a trip again next year with just the two of us...a few years ago when we were dating, we went with my mom and stayed at our timeshare...we hiked to a waterfall in Cades Cove...lots of fun...here's some pics i'll share:
http://smg.photobucket.com/albums/v6...13/Gatlinburg/ but i have to say, i've done probably 80% of the things up there, yet i still haven't been to Stars Cars or Cooter's...are those pics from the Acquarium too? |
Re: Project Vitamin C-10
5 Attachment(s)
Quote:
Quote:
Quote:
Quote:
Quote:
Cooters Place was the highest on my priority list. He has a General Lee as well, but not an original. We just happened up on the Stars Cars. My favorite shows are the Dukes and Smokey and the Bandit (original). I was happy. :sexy: I had Shannon come over and help me drop the fuel tank out so I could bolt the bed wood down. That's a lot of hardware. I'm pretty sure I can check that off the list. I was going to have one of my girls get in the bed and hold the carriage bolts while I started the nuts. They wouldn't have the patience yet for that. I just laid blocks of wood on the bolts. Now I can hook up the sending unit and reinstall the tank. |
Re: Project Vitamin C-10
jUST SO HAPPEN TO GET TO Piegion forge one year a day or two before a truck show, showed up// we were going there to I & I one weekend .. spend the whole weekend sitting out along to road in our lawn chairs watching the cars go by.. Had a great time and didn't get to go anywhere as the traffic was bad.. we've been back several times and it just doesn't seem the same without the trucks.. LOL:bann::ele::wave: Oh byt the way the bed looks great.. I've been to the cars museum (sp) great place to spend a day.. or two maybe. Did you see the corvette next to wall up front 92 I think and less than 20000 miles..
|
Re: Project Vitamin C-10
Quote:
btw, the bed looks great!:metal: |
Re: Project Vitamin C-10
bed looks awesome, great job:metal:
|
Re: Project Vitamin C-10
Bed looks really nice, great detail everything really pops with the hardware
|
Re: Project Vitamin C-10
I just commented to the wife about how large your thread was, and how many years it spans, as well as the quality of the work you have done.
I commented on how you have a practically brand new truck and she returned with it probably cost as much as a new truck too... So I was wondering if you have kept a running log of expenditures on your rig? I have done this with my Tempest; itemized by part, date, cost, and odometer reading. I have also started this with the truck, though odo reading will be moot at this time since I have rolled it back. (though in the future I will add to that column) I dont wish to be nosy, frankly I can imagine what you have into it so far (not counting $$ for the labor of course) I was just wondering if you were calculating it as you went? |
Re: Project Vitamin C-10
We should make it a game. Guess how much dough Alan has in his truck? Who ever guess the closest gets the truck.:lol: I'll start off with one million dollars.:lol::lol:
|
Re: Project Vitamin C-10
5 Attachment(s)
Quote:
The vette wasn't there, but the Charlie Angles convertable white w/orange stripes 69 Camaro was. Quote:
Quote:
Quote:
Quote:
Quote:
Cleaned up the rest of the wires that was behind the tank that I couldn't get to before. I just used some split loom and brought the fuel sender wire out of it. Made a QD for the sender as well to facilitate future removal if needed. Then just tucked into the loom. |
Re: Project Vitamin C-10
3 Attachment(s)
A couple more
|
Re: Project Vitamin C-10
3 Attachment(s)
For those that don't know, when you run power steering the left front bumper bracket has to be modified. I have to repaint now.
|
Re: Project Vitamin C-10
WHAT ?!?!?!?
You mean I am going to have to cut and modify stuff to make it fit or work?? Nobody told me this! Well that seals it, I quit.... Just kidding. I really love all the pics you take, they help immensely when I am try to figure out how I am going to tackle a part or mod. I have to stop and remind myself to take a photo of something when I get started on it, remembering to take the "after" shots is easy :lol: |
Re: Project Vitamin C-10
Hope I remember that when I get to that point. Something tells me I won't. ;)
Keep up the good work and thanks for the pics. Quote:
|
Re: Project Vitamin C-10
hey alan, just a quick question about sanding clearcoat. can you block the clear or do you just need to use your hand, i was told if you used a block it would leave drag marks.
|
Re: Project Vitamin C-10
3 Attachment(s)
Quote:
I wish I was this detailed about taking pics when i first started. If you look back the tear down didn't have many pics. The camera is like my cell phone, I don't leave home without it. I know my pnone has a camera, but no flash. Quote:
Quote:
Here's another problem I think I mentioned before that needs to be fixed. The right rail on the front of my truck looked like it was OK when I removed the original bumper. Well my test bumper will not bolt up. I can get the bottom bolt in, but not the top. There is a bump in the bottom of the rail that is bringing the bumper down. I will bring my porto- power home and see if I can make it better. I'm not using this bumper since I'm going chrome. Once done I can weld the crack that I missed and paint the front section of the rail again. |
Re: Project Vitamin C-10
Hey Alan, I had that same crack in mine on the right side bottom I welded but it up, I just hope that I don't have those problems when I got back together with mine Thanks for pointing this one out.
|
Re: Project Vitamin C-10
:bann:Hey alan guess what I found this weekend.. 86 chevy 1/2 ton 48000 yes that is correct four eight thousand miles... been garaged since day one. looks like brand new.. Price well that is a different story.. some where around Get ready.. $2000.:metal::bann::bann::bann::four::two::two:
going to sell the 57 and start a new project..hope you guys won't band me from the site.. since my truck will be newer then a 79v8 auto power sterring deluxe cab.. |
Re: Project Vitamin C-10
No way, you need to keep the 57 also. 2K is a great find for that low milage 86. :metal:
|
Re: Project Vitamin C-10
Alan, is the bumper fit close enough that you can slot the holes?? My first thought as they will be covered with the bumper installed.
|
Re: Project Vitamin C-10
3 Attachment(s)
Quote:
Quote:
Quote:
Quote:
Got a few things marked off the list. The main thing is I got all the grounds made a installed. The cab, engine, and bed are grounded to the frame. I didn't scrape the paint around the holes. I used lock washers to bite into the metal. It might be an issue later with corrosion. If so I'll use plan B. I used a ohm meter and all points had .5 ohms. i say it is good for now. |
Re: Project Vitamin C-10
I like your grounds thanks for the posting it. Were did you get the ground strap cable.
|
Re: Project Vitamin C-10
My guess is 35 grand.........Mine is over 40 grand now and I know he is smarter than me :lol:
Quote:
|
Re: Project Vitamin C-10
As long as his wife thinks it's 10.:lol:
|
Re: Project Vitamin C-10
5 Attachment(s)
Quote:
Quote:
Quote:
Something else I started today. I didn't like the way the wires were coming thru the floor. It needed a grommet for protection. I found this rubber piece on a used door at work and thought it would come in handy. I cut one end off and split it. I should have installed it prior to running wires. :dohh: It's not finished yet since I 've got more wires to run. Once the wiring is finished I'll use plastic split loom to cover the rest of the wires. |
Re: Project Vitamin C-10
You just gave me some ideas Ala. I have several of those type door wire looms! :metal:
|
Re: Project Vitamin C-10
3 Attachment(s)
Quote:
Still chipping away at the small stuff. Mounted the relays for the AC and also hooked up the main feed to the circuit breaker for the AC. Baby steps, but they all have to be done. My ends almost look professional. :lol: Some of the wires with the Vintage Air already come assymbled. They are tinny wires and didn't really want cut into them. I only had about 12" extra I looped and tied off. Still not done wiring the AC, but making progress. |
Re: Project Vitamin C-10
4 Attachment(s)
We got a new toy at work. I wish we had it when I was doing the metal work on my cab. I can almost duplicate a factory spot weld. Don't rush out and buy one. They are pricey and this one requires 3 phase power. ;(
Hey Ronnie, you need one of these. |
Re: Project Vitamin C-10
Those are sweet!!!
|
Re: Project Vitamin C-10
That is a cool tool.
|
Re: Project Vitamin C-10
That would be nice to have. :metal:
|
Re: Project Vitamin C-10
3 Attachment(s)
Quote:
Quote:
Had a pretty bad set back today as far as the truck goes. Remeber my hood? Well, it's not in as good of condition as before. This company blasted my last hood and did a great job. So I trusted that it would repeat. I had all the paint sanded off the top except around the turn signals. I removed the hood bows and reinstalled the bows by a few threads. I told the guy that I did so and for him to remove them prior to sand blasting. After seeing what happens to a 67 hood when sand blasted incorrectly, I didn't want mine that way. The guy commented on how clean it was and it wouldn't take much to do the job. He also said he had never seen one without any rust. I told him it was from California. To make a long story short, he didn't remove the bows and now I have 2 nice ridges running down my hood where the bows were. I called the lady that owns the place to give her a heads up. She didn't get defensive, but the guy that blasted it wasn't there. I told her I would prime it and see how it really looks. Then I would call her back. I also told her that these are not reproduced and this one was from California. It just pisses me off that I did everything in my power to inform the guy, and this happens. In hind sight I should have kept the bows and blasted them in my cabinet like I did today. I sprayed some DP90 epoxy primer on it hopeing to get a good reflection. It was hard to get the right light for the camera. The wife suggested that they reblast it without the bows and maybe the metal will go back into shape. It sounds plausable. In the last pic you can see the ridges about 12' from the center rib. I don't know what to tell these people that blasted it. I hate to complain, but due to the circumstances of what I went thru to get a nice hood..........I speeceless. What do y'all suggest I do? |
Re: Project Vitamin C-10
That really sucks Alan, sorry to hear this. I agree with the wife. With your rep in the area they should make it right. As much work and sweat as you got into this don't settle.
David |
Re: Project Vitamin C-10
Alan Complain they will make it right
I agree that it sucks they couldn't get it right the first time. I had an issue with my frame and they powder coated it before I was done I asked them to blast first then call me to pick it up, so I could weld in my plates for boxing the frame. Well they didn't, I took it and welded in my plates and took it back they powder coated the whole frame again. So now it has a double coating on it I can tell where it was done but it is a frame and not seen but they did make me happy with what they did to make it right. I also think that your wife has a good idea if they go over it again it may take those ridges out but you wont know till they try but then if it don't you could end up with a junk hood too so it is chance you take. JMHOP |
Re: Project Vitamin C-10
That stinks Alan, I would make them try again, we try hard to make others life easy but they don't care to return the favor, enough to drive you crazy
|
Re: Project Vitamin C-10
that does suck big time...i agree with the other guys & would definitely complain as politely as possible...they owe it to you to make things right, especially considering the trouble you went through to get a hood worthy of your truck...maybe they can try your wife's idea first, & hopefully it works....i hope the guy owns up to his mistake & they get things fixed for ya
|
Re: Project Vitamin C-10
:sumo:Alan, I'm stomping mad for you...:sumo: with the time and patience you've taken on this project I do believe that they will make it right. but it really pisses one off to try so hard and get farked up so bad... Just wondering would long block sanding the hood take the ridges out... ??? Keep the faith, I have to believe that they will make it right...
No I do not have any pics as of yet.. I will some time maybe by xmas. that is when I get to see it again... |
Re: Project Vitamin C-10
I would just bend over and take it. But that's just the way I roll.:mm::lol:
|
All times are GMT -4. The time now is 02:03 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com