The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   What Did You Do With Your Truck Today ? (https://67-72chevytrucks.com/vboard/showthread.php?t=486137)

Russell Ashley 05-29-2013 11:07 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by ChuckDriver (Post 6094873)
Nice mod of the pedal Russell! May I copy that one! ;)

Chuck, as nice as your truck is, it's a compliment that you would copy anything from mine, LOL.

focusedontheprize 05-29-2013 03:24 PM

Re: What Did You Do With Your Truck Today ?
 
My rims from Wheel Vintiques showed up. White walls from Hurst (Thanks Fish and Coach) are sitting at home ready to be mounted so I will send these off to the powder coater this weekend if I can.

I had them shipped to the body shop and the guy called me to tell me they are here. "That 8" rim is huge".

......Perfect :devil:

Coach529 05-29-2013 03:53 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by focusedontheprize (Post 6096664)
My rims from Wheel Vintiques showed up. White walls from Hurst (Thanks Fish and Coach) are sitting at home ready to be mounted so I will send these off to the powder coater this weekend if I can.

I had them shipped to the body shop and the guy called me to tell me they are here. "That 8" rim is huge".

......Perfect :devil:

Awesome....cannot wait to see them mounted up!!

Coach529 05-29-2013 03:56 PM

Re: What Did You Do With Your Truck Today ?
 
I bought a running 261, and a 235 with a bad lower end. The bonus is the 235 has the good 848 head on it. Also picked up some headers for the 261.

Probably will not happen until late fall, but already dreaming about Henry's new powerplant. :-)

OrrieG 05-29-2013 05:48 PM

Re: What Did You Do With Your Truck Today ?
 
Long box arrived with the door channels. Looks to have been opened for "inspection" but nothing is missing. Can get back to the door mods.

Bubba54 05-30-2013 08:32 PM

Re: What Did You Do With Your Truck Today ?
 
1 Attachment(s)
Went to three salvage yards today looking for a seat for the 54. Scored this liitle jewel for $32.00 bucks from a 1994 chevy truck. Kind of rough, this is the best one i could find. Will need some foam repair and covered. Does fit nice.

Attachment 1114020

Dan in Pasadena 05-30-2013 09:59 PM

Re: What Did You Do With Your Truck Today ?
 
$32??! Geez, I THINK the '89-'98 Chevy seats in SoCal junkyards are a lot higher than that. I think about $150-$200. Great deal and looks usable as is. For awhile at least.

pvienneau 05-31-2013 06:22 AM

Re: What Did You Do With Your Truck Today ?
 
Removed 3 of four bushings from a set of 49 leaf springs. 1 more to go today. Fun stuff.

mknittle 05-31-2013 10:01 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Dan in Pasadena (Post 6099351)
$32??! Geez, I THINK the '89-'98 Chevy seats in SoCal junkyards are a lot higher than that. I think about $150-$200. Great deal and looks usable as is. For awhile at least.

Everything in So Cal is more expensive:lol:.

Dan in Pasadena 05-31-2013 01:34 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by mknittle (Post 6099984)
Everything in So Cal is more expensive:lol:.

So true, so true.

Hey, my sister-in-law lives in Auburn. I go up there to visit about once a year. She lives way off the main drag, off Lorenson Road. Do you know where that is?

Russell Ashley 05-31-2013 02:13 PM

Re: What Did You Do With Your Truck Today ?
 
1 Attachment(s)
Took a test drive. In the last few days I've installed my new floor mat with jute insulation under it, installed the Lokar thru-floor pedal, and put on a new Quadrajet that I bought of of CL and rebuilt. I also added a filter in the vacuum line to my brake booster. It runs great, all I had to do to the carb was adjust the fast idle and curb idle. I didn't even "tweak" the idle air screws but might play with those just to see if there's any improvement to be made. I love it when a plan comes together, happens so seldom for me, LOL.

Drakien 05-31-2013 11:28 PM

Re: What Did You Do With Your Truck Today ?
 
Had the drive shaft rebuilt with a new yoke, carrier bearing, U joints, and balanced! Drives so smooth now! Also cleaned up the dash a bit. It was pretty dirty from sitting outside.

JWright3632 06-01-2013 12:14 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Bubba54 (Post 6099181)
Went to three salvage yards today looking for a seat for the 54. Scored this liitle jewel for $32.00 bucks from a 1994 chevy truck. Kind of rough, this is the best one i could find. Will need some foam repair and covered. Does fit nice.

Attachment 1114020


Bubba can you post some pics of your floor without the seat in when you take it back out in the future, about to replace the floor, just wondering if I should do away with the metal piece for the seat and just do a one piece floor. Looks like it fits pretty good. Awesome...

sqrlnts 06-01-2013 12:34 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Russell Ashley (Post 6100406)
Took a test drive. In the last few days I've installed my new floor mat with jute insulation under it, installed the Lokar thru-floor pedal, and put on a new Quadrajet that I bought of of CL and rebuilt. I also added a filter in the vacuum line to my brake booster. It runs great, all I had to do to the carb was adjust the fast idle and curb idle. I didn't even "tweak" the idle air screws but might play with those just to see if there's any improvement to be made. I love it when a plan comes together, happens so seldom for me, LOL.

Great work Russell, your engine bay is looking great.

Bubba54 06-01-2013 12:46 AM

Re: What Did You Do With Your Truck Today ?
 
2 Attachment(s)
Quote:

Originally Posted by JWright3632 (Post 6101349)
Bubba can you post some pics of your floor without the seat in when you take it back out in the future, about to replace the floor, just wondering if I should do away with the metal piece for the seat and just do a one piece floor. Looks like it fits pretty good. Awesome...

No problem, I already took it back out to work on the floor a bit. I installed a floor from direct sheetmetal. Wasn't to bad allot of trimming.
Attachment 1114536

I'm going to trim this piece of tubing and reinstall across the back. The piece that goes across the back doesn't interfere with the seat I installed.
Attachment 1114537

Good luck
Shawn

Russell Ashley 06-01-2013 07:58 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by sqrlnts (Post 6101372)
Great work Russell, your engine bay is looking great.

Thank you. I've got to get some better looking plug wires and but for now that's not top priority.

mknittle 06-01-2013 10:39 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Dan in Pasadena (Post 6100328)
So true, so true.

Hey, my sister-in-law lives in Auburn. I go up there to visit about once a year. She lives way off the main drag, off Lorenson Road. Do you know where that is?

That is about 4 miles from here. I used to ride motorcycles all over the back roads around here. I can even tell you how the road got it's name :lol:
Lorenson is short cut to Bell. That all used to be a big ranch at one time.

I have probably even seen her around :lol:.I spend more time on this side of town.

mknittle 06-01-2013 10:42 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Russell Ashley (Post 6100406)
Took a test drive. In the last few days I've installed my new floor mat with jute insulation under it, installed the Lokar thru-floor pedal, and put on a new Quadrajet that I bought of of CL and rebuilt. I also added a filter in the vacuum line to my brake booster. It runs great, all I had to do to the carb was adjust the fast idle and curb idle. I didn't even "tweak" the idle air screws but might play with those just to see if there's any improvement to be made. I love it when a plan comes together, happens so seldom for me, LOL.

"I love it when a plan comes together, happens so seldom for me, LOL"
It is coming together nicely too:metal:

Dan in Pasadena 06-01-2013 11:40 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by mknittle (Post 6101729)
That is about 4 miles from here. I used to ride motorcycles all over the back roads around here. I can even tell you how the road got it's name :lol:
Lorenson is short cut to Bell. That all used to be a big ranch at one time.

I have probably even seen her around :lol:.I spend more time on this side of town.

Interesting. Her husband is a surgeon at the hospital up in whatever that town is? Grass Valley? Something like that. Their house is basically at the end of Lorenson. 15 acres, nice place.
Posted via Mobile Device

Nordic 06-01-2013 04:40 PM

Re: What Did You Do With Your Truck Today ?
 
3 Attachment(s)
Got a great deal on a bench seat out of an 87 pickup. Made new brackets and got seat mounted. Will now order new seat cover for it. Temps have been in the 90's and humid so making and welding new brackets took time.

Dan in Pasadena 06-01-2013 05:14 PM

Re: What Did You Do With Your Truck Today ?
 
Looks good...and very much like the one Bubba (above) got for $32. I

f you paid more you got ripped off!:lol:

Kidding. Looks like nice work.
Posted via Mobile Device

Dan in Pasadena 06-01-2013 05:15 PM

Re: What Did You Do With Your Truck Today ?
 
Looks good...and very much like the one Bubba (above) got for $32.

If you paid more you got ripped off!:lol:

Kidding. Looks like nice work.
Posted via Mobile Device

Nordic 06-01-2013 05:20 PM

Re: What Did You Do With Your Truck Today ?
 
Only $25 got to love craigslist!

Dan in Pasadena 06-01-2013 07:48 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Nordic (Post 6102157)
Only $25 got to love craigslist!

I was joking. Man, you guys kill me!
Posted via Mobile Device

dubie 06-07-2013 07:20 AM

Re: What Did You Do With Your Truck Today ?
 
1 Attachment(s)
Lights and grill got installed. I also bolted the tranny hump down and installed the B&M ratchet shifter
Posted via Mobile Device


All times are GMT -4. The time now is 11:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com