The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 95 of 138

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - How about some pics of 67-72 Part II (https://67-72chevytrucks.com/vboard/showthread.php?t=449588)

Rusbuilt

11-20-2013 06:51 PM

Re: How about some pics of 67-72 Part II

Nice truck!

BT1	11-20-2013 08:18 PM

Re: How about some pics of 67-72 Part II

1 Attachment(s)

Here's my 72 c-10

ole dollor

11-20-2013 10:11 PM

Re: How about some pics of 67-72 Part II

Quote:

Originally Posted by 7D-TWO (Post 6373500)

First time posting something here....but I've been following through for a while. This is my 72 project. All the trucks on here are bad a$$...gotta love these trucks.:chevy: oh and HELLO to everyone

welcome from another Texan...sweet truck.

emilio impala

11-21-2013 07:06 AM

Re: How about some pics of 67-72 Part II

Quote:

Originally Posted by BT1 (Post 6378491)

Here's my 72 c-10

Que medida de llantas tenes?

Which tires measure has on?

Espero haberme expresado bien...

I hope I expressed myself well ...

:smoke:

Patrickramming409

11-21-2013 11:18 AM

Re: How about some pics of 67-72 Part II

1 Attachment(s)

my 72 custom camper c20

ole dollor

11-21-2013 07:07 PM

Re: How about some pics of 67-72 Part II

Quote:

Originally Posted by Patrickramming409 (Post 6379350)

my 72 custom camper c20

good looking kid you have there....what are your plans for the truck...

Patrickramming409

11-21-2013 07:32 PM

Re: How about some pics of 67-72 Part II

my plan with the truck is too put it back as original. the person who owned it took to motor and trans out of it 10 years ago and never touched it after because he didn't know what he was doing. I have taken the motor to someone who is going to clean it up, and rebuild it. same with trans. the interior is trashed so I need to order new seat cover, knobs, steering wheel, rubber mat, and glove box insert, dash pad, and ac ducting. I want the truck to look like it did when my grandfather drove it off the lot. I am going to remove the large under bed tank, but leaving the neck in place. the reason for removing tank is I am never going to use it, and would like to remove some of that extra weight. truck is totally rust free, and is perfect for restoration. this will be my second truck to restore. I did a 1966 c10 in 2001.

Patrickramming409

11-21-2013 07:33 PM

Re: How about some pics of 67-72 Part II

honestly I don't know the tire size on it. I have been overly concerned with that, but I will take a look, and let you know.

Patrickramming409

11-21-2013 07:36 PM

Re: How about some pics of 67-72 Part II

Quote:

Originally Posted by BT1 (Post 6378491)

Here's my 72 c-10

you tub the rear? I cannot tell.

BT1	11-21-2013 08:55 PM

Re: How about some pics of 67-72 Part II

Mini tubed 29x18x15 Mickey Thompson sportsman sr on rear on 14 inch wide rear wheels

BT1	11-21-2013 09:00 PM

Re: How about some pics of 67-72 Part II

1 Attachment(s)

I would post more pic but my Internet is very slow

BT1	11-21-2013 09:05 PM

Re: How about some pics of 67-72 Part II

1 Attachment(s)

I can only get one pic on a post how do you post more than one at a time?

knomadd

11-22-2013 10:32 AM

Re: How about some pics of 67-72 Part II

Quote:

Originally Posted by BT1 (Post 6380279)

I can only get one pic on a post how do you post more than one at a time?

First of all, :welcoem: from Rosenberg.

When you upload your image, you can do it a couple of ways. First would be with a site like photobucket. The other, when posting pics directly to the forum, it's pretty simple. When you finish browsing and upload your first picture, click browse again and upload your second pic, and again for a third and so on. I believe you're limited to 5 pics in one post when using the forums upload feature. Nearly unlimited if you post photobucket pics.

Nice truck by the way. Lets see some more pics.

BT1	11-22-2013 12:46 PM

Re: How about some pics of 67-72 Part II

Thanks for the info I will see what I can do my Internet is very slow

JRED505

11-22-2013 05:51 PM

Re: How about some pics of 67-72 Part II

Quote:

Originally Posted by 7D-TWO (Post 6373500)

First time posting something here....but I've been following through for a while. This is my 72 project. All the trucks on here are bad a$$...gotta love these trucks.:chevy: oh and HELLO to everyone

So what size of wheels you got on there?

7D-TWO

11-22-2013 06:23 PM

Re: How about some pics of 67-72 Part II

1 Attachment(s)

Quote:

Originally Posted by JRED505 (Post 6383595)

So what size of wheels you got on there?

20s all around. ...different backspacing though. Can't remember the specs.

Evaded

11-23-2013 03:08 PM

Re: How about some pics of 67-72 Part II

A pic since I dropped another 1" in front... :)

Eric (Evaded)

http://i237.photobucket.com/albums/f...psf35ed862.jpg

JRED505

11-23-2013 03:19 PM

Re: How about some pics of 67-72 Part II

Quote:

Originally Posted by 7D-TWO (Post 6383626)

20s all around. ...different backspacing though. Can't remember the specs.

Nice. Yea i really like right where that trucks sits with those wheels. Thats right about where i'm shooting for mine to sit.

7D-TWO

11-23-2013 04:04 PM

Re: How about some pics of 67-72 Part II

Quote:

Originally Posted by JRED505 (Post 6384692)

Nice. Yea i really like right where that trucks sits with those wheels. Thats right about where i'm shooting for mine to sit.

Thanks. ..yeah it rides pretty good also, but im still debating about leaving it how it sits or bagging it. We'll see. Is yours a short or long bed? What year?

JRED505

11-23-2013 04:23 PM

Re: How about some pics of 67-72 Part II

1 Attachment(s)

69 shortbed

7D-TWO

11-23-2013 04:42 PM

Re: How about some pics of 67-72 Part II

Quote:

Originally Posted by JRED505 (Post 6384760)

69 shortbed

Nice. ..really solid.

JRED505

11-23-2013 04:46 PM

Re: How about some pics of 67-72 Part II

That was actually the day i bought it right now the frame is in the middle of paint then time to start putting back together.

7D-TWO

11-23-2013 05:22 PM

Re: How about some pics of 67-72 Part II

1 Attachment(s)

Quote:

Originally Posted by JRED505 (Post 6384790)

That was actually the day i bought it right now the frame is in the middle of paint then time to start putting back together.

There u go...thats cool. I'll be doing that soon also, I hope. Just got c-notch, drive shaft, drop member, and billet carrier bearing (cpp) installed. Right now it's getting the differential rebuilt with Eaton posi and 3.73s. Also getting big brake kit installed.

JRED505

11-23-2013 05:34 PM

Re: How about some pics of 67-72 Part II

Quote:

Originally Posted by 7D-TWO (Post 6384830)

Yup did the same exact with my rear end and I also got a lot of boxes from CPP with all new suspension, drop spindles, power brake system, all kinds of fun stuff, except I'm only doing disc in the front. What motor/ transmission u got in there?

7D-TWO

11-23-2013 05:45 PM

Re: How about some pics of 67-72 Part II

Quote:

Originally Posted by JRED505 (Post 6384843)

Cool... right now it has a mild 350 and 700r4. Going to go with a 383 stroker later on.

All times are GMT -4. The time now is 03:15 PM.

Page 95 of 138

Show 40 post(s) from this thread on one page