Re: What did you do to your truck today?
 

rebuilt a gmc grille. all new hardware, retaining rings, and headlights

Re: What did you do to your truck today?
 

Sunday: Pulled the crappy seat out that came with the truck. Removed the jerry-rigged speaker box out. Tried to mount the new seat to the stock brackets but needed some flat bar to make adapters so will git er dun next weekend. Found a 1/2" wrench, kitchen knife, 2005 high school football schdule, a pay stub and two packs of rolling papers under the seat.

Re: What did you do to your truck today?
 

finally brought mine home after having it sit at my brothers house. went needing some work came back in primer and a little lower.

Re: What did you do to your truck today?
 

I put in the bench seat so I could sit in there and make "vroom vroom" noises... does that count? If not I worked on fabbing my motor mounts. Putting a 250 where the 235 used to be.
:smoke:
Posted via Mobile Device
Posted via Mobile Device

Re: What did you do to your truck today?
 

Thats a pretty cool looking truck.

Re: What did you do to your truck today?
 

Dig the supremes!:D

I had a set on a previous car, and sounds like I may have a deal worked out with the new owner to trade them back :metal:

Re: What did you do to your truck today?
 

Pulled the engine back out!!!! as the builder used too long of a bolt on the balancer and it was not tight. Thus I have one huge POS... Starting over bought a 400 block and I get to reuse my heads intake and carb, headers, valve covers and oil pan. The rest is wiped out. Crank had .018 thrust, it took out the rods, pistons, Crank..well it had a craked key way so it was junk already. Block was not 30 over but 60 over.. He is out of biz and no one can find him..

Re: What did you do to your truck today?
 

I have my truck off the road for a few weeks to get some stuff done.

The battery is being relocated under the bed on the passenger side. I got the box built for it last night and hope to install it tonight and wire it up.

Re: What did you do to your truck today?
 

put in my new tilt column tommorow steering wheel and hook up electrical. the steering wheel is a red mettalic wheel from mooneyes

Re: What did you do to your truck today?
 

Pretty much finished the chasis, starting on the cab now, cleaning the bottom on the outside, will sandblast tomorrow, then will work on the floor on the inside, will repair rusted out places. POR-15 it then undercoat it next weekkkkk

http://kieth.smugmug.com/Trucks/66-G...55794128_yZNmN

Re: What did you do to your truck today?
 

here are pictures of new column and steering wheel

Re: What did you do to your truck today?
 

i like the it gimmy

Re: What did you do to your truck today?
 

Man that wheel looks good. Is that a Lokar shifter?

Re: What did you do to your truck today?
 

Started working on the cab top and bottom of floor, rust is not too bad.......stuck the black bed wood in the bed just to see how it was going to look.....Kieth

http://kieth.smugmug.com/Trucks/66-G...56429338_SNvTB

Re: What did you do to your truck today?
 

took the heater core off and started to clean it out.......hmm do you think this is why the heater did not work ??

http://kieth.smugmug.com/Trucks/66-G...56508564_UKF6o

Re: What did you do to your truck today?
 

:haha:.....looks like you cleaned your yard with it!!!

Re: What did you do to your truck today?
 

naaaahhhhh, looks clean to me!

Re: What did you do to your truck today?
 

Lokar 23 inch shifter, mooneyes steering wheel

Re: What did you do to your truck today?
 

Blew out the left front wheel cylinder and creeped it home with no brakes.

Re: What did you do to your truck today?
 

Welcome to the forum. The good news being you made it home.

Re: What did you do to your truck today?
 

I bought my truck back from a friend today after trading it to him for a '72 Harley project about a year ago. It's in a million pieces but it's actually in better shape than when I traded it! haha

Re: What did you do to your truck today?
 

Fabricated and installed brackets moving the fog lights 1 ¾” forward and down ½”. They had been mounted on top of the bumper, nearly in contact with the G & C grille letters. This blocked the view of the letters and made it difficult to clean the letters and the lamps. The new position also makes the lamps look more “important”. The brackets also permanently align the elevation, allowing deletion of the adjusting swivels. To properly align now all they need is left to right positioning. The best part was the project only cost $1.68 for some new nuts and bolts.

Here are a few before and after shots:

Before

http://img510.imageshack.us/img510/6664/bracket00.jpg

After

http://img844.imageshack.us/img844/7995/bracket01.jpg

Before

http://img718.imageshack.us/img718/7051/bracket02.jpg

After

http://img577.imageshack.us/img577/6263/bracket03.jpg

Re: What did you do to your truck today?
 

Just got back from the painter and he has the clear shot on the upper sections of the cab and dash. We're getting close boys!! The finish will be semi-gloss, the clear was still wet.

Re: What did you do to your truck today?
 

It looks beautiful in high gloss as well!

Re: What did you do to your truck today?
 

Bought a split bench seat off of craigslist. My bench is shot, needs new foam and a cover, which would cost more than the truck itself did, so I'm gonna use this one. Upholstery and foam are good it seems to be pretty comfy, almost as comfy as the the fact I got it for 20 bucks!

http://i125.photobucket.com/albums/p...0116111510.jpg