Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

For sure.


https://i294.photobucket.com/albums/...pscjyzvvvs.jpg

http://i294.photobucket.com/albums/m...psuqpwe8gu.jpg

http://i294.photobucket.com/albums/m...psp1cyverw.jpg

http://i294.photobucket.com/albums/m...psjfi41kmo.jpg

Our hosts.

http://i294.photobucket.com/albums/m...psadynmqyo.jpg

http://i294.photobucket.com/albums/m...psdx6htdyz.jpg

Early on, more to come.

http://i294.photobucket.com/albums/m...psfwmvdgx5.jpg

Midget.

http://i294.photobucket.com/albums/m...psmxouyi9o.jpg

Mini Midget.

http://i294.photobucket.com/albums/m...psnyogq2nz.jpg

Looking back.

http://i294.photobucket.com/albums/m...psjz6fe7zb.jpg

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

http://i294.photobucket.com/albums/m...psvlmvzqtd.jpg

http://i294.photobucket.com/albums/m...ps4ya5xquj.jpg

Then something big came along.

Real big.

http://i294.photobucket.com/albums/m...psecpnbg7a.jpg

http://i294.photobucket.com/albums/m...psqfctqdgy.jpg

http://i294.photobucket.com/albums/m...psa0cplikj.jpg

loads of carpark,chat.

https://i294.photobucket.com/albums/...psecesjzp8.jpg

http://i294.photobucket.com/albums/m...ps6zgtistu.jpg

And a couple more that I enjoyed taking.

http://i294.photobucket.com/albums/m...ps5bn5d4br.jpg

http://i294.photobucket.com/albums/m...psc3arb5al.jpg

I think that’s the lot.

After this, around 11.00am we headed out as we both had stuff to deal with.

Me.... a garage and piles of steel.

Kevin, T6 build.

Thanks for looking in.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Weirdly, after some time of inactivity, things are coming alive at Chez Grizz.

Certainly, playing a part in it all is Sally.

She took all the pics below, sneakily while I was busy, to me it shows a certain interest

She continues to send me pics of old cars and animals and chases me to the garage when she can.

Sunday afternoon, she came over and made me clear up outside the garage, moving stuff, sweeping and to be honest, being one of the nicest pains in the butt, I have had there for a long time. This does not include @PaulY who is always welcome.

With all the plastic pallets already removed by Prozac, the trailer needed it’s wheels pumped up and moved with stuff on top of it.

The steel work bench also needed to be moved temporarily, as did the trolley I used to move theC10chassis in and out when I was doing all the work on it.

https://i294.photobucket.com/albums/...pstdlbt1za.jpg

Much more to be cleared, but headed in the right direction

http://i294.photobucket.com/albums/m...ps8ipubmyf.jpg

Job done, trust me.

Now I can weld and cut and grind out in front of the garage again, thanks to some good motivation

http://i294.photobucket.com/albums/m...ps34ymdhmo.jpg

There are a few tasks to do before I get going on the Chevy Resto Reboot, including removing the existing deck, rebuilding a new one and some other random tasks.

But it will be gotten back to.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Well, one photo would not really tell the story.

But the rear seats in these unbolt real easy.

http://i294.photobucket.com/albums/m...pss6r76hji.jpg

Especially if you have help or supervision in the shape of a fur ball.

http://i294.photobucket.com/albums/m...psvca4ipci.jpg

But why would I be needing to liberate 2.0 meters of longitudinal space??

http://i294.photobucket.com/albums/m...psu0zfrx17.jpg

Totally related, but not easy to see till this all progresses a lot further “down the road” was Mickey next door’s old sofa that had a tear in the one seat leather......

http://i294.photobucket.com/albums/m...ps72zyjloh.jpg

But the back panel was very good, undamaged.....

So harvested.

http://i294.photobucket.com/albums/m...pswajxq3le.jpg


Colour may need some editing at some point.

And distressing too.

http://i294.photobucket.com/albums/m...psipyjjxiz.jpg


Answers on a postcard.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Love this sort of thing


One ride, one visit to A&E


OWNERS BUILD THREAD.
http://67-72chevytrucks.com/vboard/s...d.php?t=767315


https://i294.photobucket.com/albums/...psjnnxyw10.png


http://i294.photobucket.com/albums/m...psnkbsb9hi.png

I wanted to build one just for fun, then @CraigRK offered me a free pile of bits he has owned for 13 years.


At least we know it will, should fit in the back of Prozac......


Fetching early on Saturday.


http://i294.photobucket.com/albums/m...psvapuedey.jpg

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Kewl :metal:

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Rian, Now that Spring is just about here I have to get busy in my Garage- Unless you want to help me when you get here in September?:lol:

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

:ito:

Ahhh yes, who knows.....


We may darken your doorstep again.




Another week over.


Last night saw this happen at a work awards dinner, sales, yes.


Thank you to all of those of you taking the time to be part of my MoJo recovery, being friends, supportive and generally motivational from behind the scenes.

You may not even realise it, but these forum families are a lot more valuable than the sum of their parts.


https://i294.photobucket.com/albums/...pswiwumubo.jpg


And then there are some very special friends, like mate Martin and @CraigRK......


Both sent me this screen shot last night.


So the question is.....

With the red truck awaiting loads of attention, the Blazer not completed the way I want it to be, so not completely out of my system, another truck seen recently that made my pulse race.....


What’s a man to do.


http://i294.photobucket.com/albums/m...psx6vw94pd.jpg


One more day in a meeting room, then it’s the weekend.

Out in Prozac at 06.00 tomorrow, over to Craig’s to collect the other little (it is bigger than it should be) Project, and buy our USA 2019 Road Trip tickets. Followed by the rest of the weekend with Sally....


Life is certainly good.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Glad to see things going your way and you look happy!

I noticed on your blazer thread a picture of your '66, I never paid attention before, but your '66 and my '65 where the same color light blue from the factory. I am leaning to whenever I paint mine again, that I will go back to the light blue.

Again, you have made a great point, this forum family is more than the sum of its parts. Great support, trucks or otherwise.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

well that has never happened to be me before...

it double posted the one above...

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

:agree:

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

I love the original green from the era, the blue is nice, but I have bought all the paint already, three years ago.



Thank you guys.


Found these in the garage last night.

Hand made.

https://i294.photobucket.com/albums/...ps6hid2oed.jpg

And some Sachs Madass 125cc headlights.

http://i294.photobucket.com/albums/m...psb6uswdpz.jpg


They could work.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

This certainly ain’t no Chevy.



Headed out early, as I did not manage to sleep much. Due to a bed bug.

http://i294.photobucket.com/albums/m...psu6wqf839.jpg


Got to Craig’s place and typical of his style, the file was here, waiting on his daughters art table.

https://i294.photobucket.com/albums/...ps9g7imqhg.jpg

After coffee and chats, we headed out to his unit about 20 miles away.

Unpacking some bits, we eventually made it to the back of the unit and started to extricate what was left of the scooter, he had bought it 12 years ago, almostto the day, with the plan to fix it for his sonwho was 5 at the time, Kyle is now 17and passed the 50cc phase, onto a 125cc geared bike and a very nice VW Polo 1.0 liter

Loved this.

Loooong and lazy.

http://i294.photobucket.com/albums/m...pszldkragu.jpg

Once he got to the back of the unit, it started to produce an alarming pile of chaos.

https://i294.photobucket.com/albums/...psdhbbevuy.jpg

http://i294.photobucket.com/albums/m...ps8jimcwrn.jpg

Original tool kit, keys, copper pipe, plastics, brake shoes etc.

I am looking for an old trumpet, or similar complex brass musical instrument by the way......

https://i294.photobucket.com/albums/...ps4ysgb9wm.jpg

Lastly.

From little Oaks, grow big trees.

Craig’s first bike his dad bought him when he was possibly 10 years old or less, no idea. Hopefully he will be along to correct me.

Dinky thing.

http://i294.photobucket.com/albums/m...ps0gvnuwqm.jpg



Next job, go unpack the pile.


Back in a bit.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

So we got to having what was left of the scooter, out into the sunshine.

http://i294.photobucket.com/albums/m...ps5wjsmfmt.jpg

Of course needed to try it on for size.

Lowrider.

http://i294.photobucket.com/albums/m...pscviznikf.jpg

Normal

http://i294.photobucket.com/albums/m...pszn1u8jr1.jpg

Raised bars, legs forward.

http://i294.photobucket.com/albums/m...psjne84trx.jpg

Of course, an idea, STEAMPUNK ?

http://i294.photobucket.com/albums/m...psah1ryx6k.jpg

Dragged it toward Prozac, wheels locked up.

http://i294.photobucket.com/albums/m...pspmum3dl1.jpg

http://i294.photobucket.com/albums/m...psyqkfmyz3.jpg


.
Loaded it in, @CraigRK holding it all in place. Before I strapped the lot down.

http://i294.photobucket.com/albums/m...psaoyqwy9r.jpg

More stuff loaded, then off to Craig’s to fetch a few more bits.

http://i294.photobucket.com/albums/m...psucyofpzk.jpg


Eventually made it home

Cat outside, waiting to be let in.

https://i294.photobucket.com/albums/...ps6n5dbaw7.jpg

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

You ain't done unpack'n yet? ;) :lol:

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Morning Bill,

Sorry for the delay.

Had a visitor, much more important than updates.

So once I got home from Craig’s and dropping off some 8” caster wheels for mate Martin to fit to his rotisserie to make it mobile, I had a cuppa tea, then went down to where Prozac was parked and started to unload some stuff, getting to this point, I realised the size of the task ahead.

https://i294.photobucket.com/albums/...ps3363ckmb.jpg

Unloading actually allowed both wheels to free up a bit as this has been stored indoors and outside for many years.

Sally was possibly not overly impressed with my filling the space we cleared last weekend for the Red C10’s bodywork to be started and done in with another silly project...... but she has two petrol head sons, so totally gets it.
The older one, Luke at 26 seems to have the same mentality as I do regarding this sort of thing and approved.

VIDEO LINK. https://youtu.be/M-uHwMpdTA0

http://i294.photobucket.com/albums/m...psyrjwj9jv.jpg

Not very big.

http://i294.photobucket.com/albums/m...psxie55wlo.jpg

Minute carburettor on this two stroke 50cc scooter.

No idea how dirty it all is.

http://i294.photobucket.com/albums/m...psz3hhekjj.jpg

Got the gas tank open, dry, but added a bit of fuel in.

http://i294.photobucket.com/albums/m...pseyy0gwoy.jpg

Got the Blazers battery out to try start it.

Only got a bunch of relay clicks, and the horn making contact, but no noise.

Guess next step will be to clean all the electrical contacts because 12 years can play havoc with it all.

Sally had come over with her dog, Bear that she had taken for a long walk too, and of course though no contact, Harley was not impressed and chose the high ground till she had left. After supervising my unloading and moving the scooter about.

http://i294.photobucket.com/albums/m...psjlwrn885.jpg

After Sally left, Harley was straight in to inspect and approve the new item.

Always makes me laugh how she takes charge of stuff down at the garage


https://i294.photobucket.com/albums/...psqcu2zq6n.jpg


Once I had failed to coax any life out of the motor, I tidied up and parked it under one of the old bike covers Craig had given me.

http://i294.photobucket.com/albums/m...ps7dh61eew.jpg


So next step today will be to go back and start again, this time disconnecting every electrical connector and cleaning them with an abrasive to ensure complete contact.

Then try start it again.

Fingers crossed.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Bit of a chilly day, windy too.


This is a Honda Zoomer or Ruckus, cult following out there, and one of the looks I would love to emulate if Steampunk does not come together.

http://i294.photobucket.com/albums/m...psv2mhyv8m.jpg

Went down to the garage late.

Last time this was on the road, 2004.

http://i294.photobucket.com/albums/m...pscmanunsw.jpg

Ignition on, fuel gauge live.

Note the miles this has done, not a lot.

http://i294.photobucket.com/albums/m...pstogrs3i9.jpg

Dragged the skeleton into the garage, put about a litre of fuel,into the tank.

https://i294.photobucket.com/albums/...psukgc7ehy.jpg

Cleaned all the electrical contacts with some fine emery paper.

Then tried to jump start if from thenBlazer again, and for one positive sound, like a mini Bzzzt, then just relay type clicks after that.

So removed the plug, seemed fine.

http://i294.photobucket.com/albums/m...pswmhrwvan.jpg

Then dig deeper and found this.

HELP OR ADVICE NEEDED PLEASE.

On the Italjet I have.....

I have not been able to start it but found this part to be corroded, and a wire loose.

Seems to have an association with the carburettor


[img width=576 height=1024]https://i294.photobucket.com/albums/mm90/niknakpix/bicycles/B8A13B47-6789-4931-8FC9-6110EC1689AB_zpsms1tahq3.jpg[/img]

And yes, it’s corroded and one wire is adrift.

[img width=791 height=1024]http://i294.photobucket.com/albums/mm90/niknakpix/bicycles/E8A9ED31-1D1A-47FD-A99B-98F79766E61A_zpsa3cmpgaa.jpg[/img]

And this is where it lives.


[img width=831 height=1024]https://i294.photobucket.com/albums/mm90/niknakpix/bicycles/90E4CBD5-1B61-4CC3-BA99-BADE079D7289_zps69ggyina.jpg[/img]


Thank you.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Weird part identified.

http://www.italjet.co.uk/index.php?a...productId=1217



I think that business has closed its doors, at least partly.

Tried to phone both numbers and not open.

Only ebay shop is said to operate on phone message.

So, does one support a business like that, or step away before losing your money.

It’s a pricey part

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Been here 8 years.

My deck even longer.

Never maintained before I got here.

Needed help.

Maybe too late for the product below.


https://youtu.be/i6c4Nupnup0


So ordered a load of decking, 2x4’s and screws etc.

Tool Station, only one tub available per branch, not able to transfer between branches.

Bought these.

http://i294.photobucket.com/albums/m...ps6jbsxu29.jpg

Weirdly, even called the company, to find out where I can get more bits...l

Ermmmmmm.... nope, they do not know WT actiual F ??

Seriously

Weird head and weird bits..l.l.

http://i294.photobucket.com/albums/m...psf5kz5zmk.jpg

Wood Delivery Saturday morning

In the mean time, Sally and I stripped the boards tonight after work

Frame left as a reference for Saturday when @CagRK and Woodsie arecoming over to give a hand, and advice.


Deceptive angle. Already had front panel off.

https://i294.photobucket.com/albums/...psnlrbsmcd.jpg

Sally, straight in.

http://i294.photobucket.com/albums/m...psydptbkfm.jpg

http://i294.photobucket.com/albums/m...pss8eic7iu.jpg

Security.

http://i294.photobucket.com/albums/m...pse5oiu3l1.jpg

https://i294.photobucket.com/albums/...psssx4cpb7.jpg

Rotten boards and bearers

https://i294.photobucket.com/albums/...psfrip940c.jpg

https://i294.photobucket.com/albums/...psaw1xjvsy.jpg

http://i294.photobucket.com/albums/m...ps3qtgujay.jpg

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Hoping I don't ever need to do that on my front porch. Used those Trex (??) fake wood stuff.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Got to get ready for those spring and summer BBQ's!

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Did consider composite but decided against it

Yes sir !!


Text from mate Henry

Checked the nail situation when I got home last night- they are around 90mm long and galvanised ring shank so will last and hold the timber👍
Stripped the nail gun too and ordered the service kit for it and charged the batteries as well.

Looking forward to using these tools again and getting the deck done😄

So along with screwing and nailing it could be good fun.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Bought the M10 x 75mm lightening bolts and some screw plates today.

No instructions as to drill bit size. Shaft is 10mm between threads.

Tip is 7mm but not sure thats relevant.

What is the concensus on SDS drill bit size??

8mm ?


http://i294.photobucket.com/albums/m...pszwjfgk4h.jpg

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

From what I found online and nothing specific was found, but based on other brands and charts I found for this type of fastener, you need a 10mm diameter drill bit.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Agreed.

Seems to be the general consensus



Got a phone call late this afternoon from the guy I ordered the wood from..

“Is there any chance of delivering your order on Friday morning?”

Of course, thankfully I am stuck on a Skype call, so need to leave later.

This means we can start earlier, or at least on time.

Due to a family upheaval Henry had to withdraw from the fun, but it should still be a fun day.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Well....

We are on.

http://i294.photobucket.com/albums/m...psakjorg5u.jpg

08.35 the doorbell rang. I was on a Skype teleconference and training. So just opened the side gate.

Half an hour later.

Magically there is a pile of wood.

A deck in there somewhere.

http://i294.photobucket.com/albums/m...pshf8uthe5.jpg

Next step.

Buy lunch stuff on the way home tonight from work.

Then Sleep. Get up. Get tools out. Wait. Or knowing them both Craig and Woodsie will be here before 08.00 all excited to get started.

Fingers crossed for a good day and completion tomorrow.

Sally is working till 3pm or else we would be guaranteed of an endless barage of whip snapping and being told to get on with it, between cups of tea and biccies.

Later.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

A pic Craig took last night before we finished up,

Kinda dark already.

I am knackered tonight.

Will do update tomorrow evening


https://oi294.photobucket.com/albums...psmygnfmop.jpg

Night.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Sunday morning I woke by 05.00 due to my unfit body objecting.

Down in the garden by 07.00 I started to prepare for the step off the deck that I had decided to extend by 150mm

Some bags of sharp sand and pavers brought around from behind the garage and put on standby.

https://oi294.photobucket.com/albums...psgfpwsf71.jpg

https://oi294.photobucket.com/albums...psxgabdin1.jpg

Dug a shallow strip down into which to lay the pavers.

Unfit......

https://oi294.photobucket.com/albums...psrw3lpkhg.jpg

https://oi294.photobucket.com/albums...psv70c4egi.jpg

This strip of slabs allows the front legs of the bottom step that takes a load of heavy traffic to sit on a solid, dry base.

https://oi294.photobucket.com/albums...psyj691vqa.jpg

In the mean time, Mickey came around to have a nose around at what I was doing, checking up on Kevin who had advised that I change the lay of the triangulated section deck boards.

https://oi294.photobucket.com/albums...psqypbxvmr.jpg

https://oi294.photobucket.com/albums...ps3x5cd3fy.jpg

Getting on with it.

The redesign meant more legs, a noggin and strengthening so that I can continue to ride my 1200 GS on there when needed.

https://oi294.photobucket.com/albums...psl2qtverg.jpg

Being the clever old stick he is, Kevin created depth spacers, and we pre-screwed all the riser supports, got the levels right and then fixed them in.

https://oi294.photobucket.com/albums...psnjz5rwyb.jpg

https://oi294.photobucket.com/albums...psdazsahge.jpg

Started to put the supports for the stair risers in as well, screwing them into the sides of the deck support legs, of course as per usual Catscan inspection and investigation carried on, despite the rain and miserable weather.

https://oi294.photobucket.com/albums...psw2pa1o8t.jpg

https://oi294.photobucket.com/albums...psfydg79mu.jpg

All in place

https://oi294.photobucket.com/albums...ps9n6y3nqx.jpg

Next step would be to do the final deck board next to the house.

But a cuppa and some biccies that Sally made, first.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Very nice. Did the supervisor give her OK on it? ;) :lol:

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Supervisor seem s to really like it.



Next job was to get a long cut to get the sliver off the last deck board.

Amazed that these boards are not all the some width, funny how modern technology claims to be more accurate but there is not pride in product.

https://oi294.photobucket.com/albums...psueiqafuk.jpg

Then a funny kinked cut at the end to fit the driveway and the end of the deck.

https://oi294.photobucket.com/albums...pselq6tjqt.jpg

In place.

https://oi294.photobucket.com/albums...psgjnhfxvs.jpg


LAST JOB.

THE STEP........

BY NOW IT WAS RAINING A LOT MORE THAN WE WANTED IT TO.

And 220 Volts out in the rain would make for interesting work.

So not photos at all, of the individual legs on each riser support.

We decided to add two 35mm x 145 mm legs to each, screwed in from both sides of the support as there is a slope to the ground and each was to be a different height by a few mm.

Then the front face plate again needed tome trimming so not contact with the paving blocks under the legs or the grass, which should never get to it.

Lastly, three boards wide step, is 150mm wider than the one it replaces, as it makes for another nice place to sit while the fire is going for the BBQ.

SO DECK COMPLETED BY 17.00 on SUNDAY AFTERNOON.

NEXT UP WILL BE MAKING A LARGE TABLE, AND A DECENT BENCH, USING THE TAILGATE I RECENTLY BOUGHT AS A BACKREST.

https://oi294.photobucket.com/albums...psq5ah3oku.jpg

https://oi294.photobucket.com/albums...psfhspwvhe.jpg


https://oi294.photobucket.com/albums...psponqjnyu.jpg


https://oi294.photobucket.com/albums...psbucsdefk.jpg


https://oi294.photobucket.com/albums...ps0mbjtqvb.jpg


A MASSIVE THANK YOU TO CRAIG AND KEVIN, AND ALL THE REST OF YOU WHO INPUT WITH ADVICE, MOTIVATION AND COMMENTS.

ANOTHER GREAT JOB DONE THANKS TO MOJO RETURN.



https://oi294.photobucket.com/albums...psnb0eumpe.jpg

(Craig was not available for the team photo)


Laters.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Having lived here since September 2010, yes, time certainly flies and the world has changed somewhat, there has been a procession of used deck furniture, chairs, tables etc.

And when we rebuilt the deck, I carried the chairs and table down to the bottom of the garden, in order for them to be out therapy.

The table, which I got from Mickey two years ago as a cast off, started to self destruct.

Fortunately I had a plan.

@CraigRK had found me a wooden garden gate plus one that was cut up, when he went to buy some wooden garage doors last year, or was it this year? Yes, last year.

Delivered them and I stored them knowing the deck needed replacing.

So yesterday I started off by cleaning up some more of the old decking timbers, angle grinder on hand to cut back some of the embedded nails as there were some weird galvanised nails used that one just will not shift despite all sorts of encouragement.

Carried the gate up to the house followed by the wood and all the tools.

https://oi294.photobucket.com/albums...psqgvutpgt.jpg

Hail and rain and a freezing breeze saw me in 5 layers again till about midday.

https://oi294.photobucket.com/albums...psaqqhpgb8.jpg

Cleaned up wood.

Amazingly, this stuff looks like new, except for old stains and water marks.

https://oi294.photobucket.com/albums...pstjtmwz3b.jpg

Bit of trimming here and there.

https://oi294.photobucket.com/albums...psdmjfvz4v.jpg

The biggest problem was actually what style of legs and support I was going to add.

A-Frame shaped trestle legs, straight with jointed sections or what.

As I tend to use furniture as load bearing tools.

In the end I decided to not go with the loose trestle style, but to attach it all, with cross braces and then again, braced diagonally and attached to the table.

I had o relocate some of the gate bracing in order to move the legs inboard from the sides so one can seat 8 people comfortably around it, this is what happens when you have a group BBQ here.

Sally had a day with friends, and Bear her dog, so I was alone, and able to get on with the job, with the occasional chat to Mickey next door who needed some tools, and was fitting cut bricks to his newly decorated and recessed electric fireplace.

We also agreed to remove 25 foot of the hedge between our homes and replace it with concrete posts and gravel boards plus 6 foot panels in order to regain about a meter of my property next to the deck.

Won’t look good till my eyes get used to it, but needs to be done.

Legs, cross braces in position.

https://oi294.photobucket.com/albums...psxntad8qy.jpg

Diagonal braces in position too.

Table looking skinny.

https://oi294.photobucket.com/albums...psp33fozzp.jpg

Done.......!!


Well, it was meant to be done.

Then realised it looked pretty rubbish.

https://oi294.photobucket.com/albums...pseeaj1vma.jpg

So went to the pile of good decking and pulled a board out, they are 35mm thick.

Screwed one to the table top and ran the circular saw down the length, guided by the centre groove, and made some sides to screw on and tidy it all up.

https://oi294.photobucket.com/albums...ps0cskwdnw.jpg

Screwed the sides on and then fetched the belt sander because it’s never really done, is it.

I had planned a simple, rustic table to use on thendeck.

Wrong.....!!

It was turning into a bigger job again.

https://oi294.photobucket.com/albums...pshghb2y9i.jpg


And finished.

https://oi294.photobucket.com/albums...pslywbfwbp.jpg


Or was it finished??


Errrrrmmmm.......??


Nope.


More to come.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

One more pic.

Final underside assembly.

I suspect you could put a V8 engine on there now (carefully)


https://oi294.photobucket.com/albums...ps90hjy0v4.jpg


Off to the Kent American car meeting in Prozac in a bit as the Blazer is stuck behind a pile of wood down the bottom of the garden.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Very nice Rian!

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Job done.



Was out for most of the day, home by 2.30pm

Flipped the table over and gave it two coats.

https://oi294.photobucket.com/albums...pszppbwfcg.jpg

Then another good thick coat on top and dragged it onto the deck.

https://oi294.photobucket.com/albums...psrpgosdwp.jpg

https://oi294.photobucket.com/albums...psugcyu3nv.jpg

Also tested the tailgate that will be cackrest to the bench I plan to build.


https://oi294.photobucket.com/albums...psugcyu3nv.jpg

Next job will be to build the framework for the bench.

And then get it completed.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Yesterday was the Kent American car Breakfast Meeting so Sally joined me and we went to Sevenoaks but had to use the Berlingo as the Blazer was parked down at the bottom of the garden, with all the decking boards and furniture blocking it in.

While we were there I was having conversations with @Disasterbus and mate Martin on Messenger.

Disasterbus was a car conversation, nothing unusual there.

Martin, conversely was trying to spend some of the money in my wallet.

He sent a message about an engine hoist for sale.

And it is one of those things I do not own, but have access to, Martin’s is 15 miles away, in the back of a garage behind his house, with bikes, a truck and various other bits blocking it, and @CraigRK has his stored 80 miles from here, so neither ideal.

I will need one to lift the engine and trans back into the frame of the C10 as well as lifting the cab on and off when the time comes to remove it, paint, cut, weld and paint it.

At £70.00 and an hour long back road “road trip” as Sally said, coming back via the Isle of Sheppey and a couple of shops, finally getting an overpriced take away shop coffee that tasted great 😉 it was a fair deal imho.


Also saw these guys on the way back.

https://oi294.photobucket.com/albums...pshson4vrv.jpg


And the hoist, used for one job by its owners whe was building a boat, and needed to manage the motor into the hull at some point.

Looks like new.

https://oi294.photobucket.com/albums...pshzyw0qiq.jpg

I also managed to build a large BBQ table to go on the new deck

http://forum.retro-rides.org/thread/...building-table

So a great weekend all in all.

Just waiting for summer now.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Nice one Rian

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Pavement find on South Circular on way to work this morning.

Little Tykes Coupé car.

Google or check Amazon for price.

Perfect for Sally’s one year old grandson.

Her sons are 19 and 26 and had days of fun in one too as kids.


Did I mention Free is good.


http://i294.photobucket.com/albums/m...psartqz1wv.jpg

I do Like her pragmatic view on stuff like this.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Is it only my screen that posts up massive images the last week, or is everyone else seeing supersized images too??

When I post a reply, the reply box is minute.











.





A quote from a Garage Journal member.

Easier to copy and paste.


Morning Bob,

Those Self Driving carts are very goood at dividing communities.

Table is great, had a friend around to collect my sledge hammer yesterday morning early as she has concrete to break (does not need me) and we had a coffee and chat at the table, it feels really good.

I actually increased the leg height by 30mm as 99% of visitors will be full sized adults, and the patio table it replaced was always a touch low.

Regarding the toy score, I think partly it’s a mindset, and so many people fall foul to advertising, opinions and nonsensical false pride.

How often do kids prefer the box an item comes in, wonder why.....?

Anyway, this girl knows the value of her pounds that she works incredibly hard for, so anyone giving her or her son free £50.00 toy, is putting £50.00 back into the kitty.

I could just imagine what went on inside Liane’s head (well, as a man we never really know, do we?)


Sally has also opted to take the small two seater bench that was on the deck the last three years for her garden. I had inherited it from Mickey next door, and the new one I will be building will be bigger and more robust.

Painted it for her on Monday evening after work.

http://i294.photobucket.com/albums/m...pskmxlcup6.jpg


She was very pleased.

Now to find time to build a bench.

It’s WHEELS DAY on Friday so my time is allocated.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Rian,yes they are big. I saw where some pictures in other forums that I'm on had this issue also and some thing got changed in photo bucket.

Rick

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Thanks Rick

Not sure what one can do about it as Photobucket historically dont care.



Off to Wheels Day tomorrow.

Picking up a windsurfer to go on the Blazers roof if I can find a decent set of fitted roofracks somewhere

http://i294.photobucket.com/albums/m...psjclgroga.jpg

As per what one should do, I checked over the tyres etc. last night and found the rear tyres both with some side wall cracking.
Tread depth is almost like new but I suspect they have been there 10 years or more.

http://i294.photobucket.com/albums/m...ps5yiwggc3.jpg

So early in to spend £86.00 on two Chinese Ditchfinders for the rear.

Again, I have to say, This car has cost peanuts to run the last three years.

What a pleasure.

And these guys in Strood are both helpful and friendly and matched any prices I brought.

Win Win.

http://i294.photobucket.com/albums/m...psu2xti3s3.jpg