![]() |
Re: What did you do today not on your truck...
3 Attachment(s)
It wasn't today, but this past Saturday, Me and my buddies pulled the engine from my 95 Trans Am. For those of your that don't know, the engine comes out from the BOTTOM.
|
Re: What did you do today not on your truck...
Quote:
|
Re: What did you do today not on your truck...
Oh, it isn't at all since the windshield comes half way over the intake. Not only do you have to drop the coolant, freon, fuel, trans fluid if auto and brake fluid. Then you get to raise the car enough to slide the engine, front suspension, and trans out as one unit. We did this in my low slung garage (7 foot at the lowest, 8 foot at highest) and on a day where it only got to 35 degrees in Atlanta. Fun Level = 3
|
Good day
Quote:
|
Re: What did you do today not on your truck...
Yessir. Good day. It's been 2 years since the covid outbreak and we are just now beginning to go back to inside dining.
|
Re: What did you do today not on your truck...
when I got home from work, my youngest son came up to me, and wanted to know if I would take him and his girlfriend out for a ride in the 72...I could not resist that thought!.beautiful ride up to the river and back, we took some dinner with us and ate sitting on the tailgate watching the sunset, talking bout our day, we all had a great afternoon!
|
Re: What did you do today not on your truck...
2 Attachment(s)
Found another goodie in one of the Hershey sell box NOS A/C Delco fuel pump . In 65 and 6 studebaker used Chevy motors
|
Re: What did you do today not on your truck...
Quote:
|
Re: What did you do today not on your truck...
Quote:
|
Re: What did you do today not on your truck...
4 Attachment(s)
after dragging the stock ramp racks on my quad trailer everywhere for 10 yrs, finally decided to get rid of it. never, ever used it, and it's about 150 lbs of excess weight the trailer can do without.
something like 90-100 torx screws to come out of the deck boards. surprisingly didn't strip or wreck a single one...:metal: Attachment 2177886 deck was TIGHT. even with the screws out i had to use a jack to force the first board out, then it went pretty good...hope they go back in as nice too Attachment 2177888 so many times i've dragged this or hooked on rocks or stumps... the backstop bracket is completely welded in and no where for water to go...be glad to get rid of this. will re-paint the underside and a couple coats of sealer on the boards. Attachment 2177891Attachment 2177892 |
Re: What did you do today not on your truck...
Nice Work.:metal:
I have a Helper/Inspector just like you. She is a different Breed/ but all in all. The same because /If it moves /She is there:lol: |
Re: What did you do today not on your truck...
1 Attachment(s)
-
Baked Chocolate Chip Cookies. (again) My wife keeps eating them. I guess I will have to hide this batch.... :lol: .. I like mine a little darker than she does so I leave some of them in the oven a little longer. If I can find some shredded coconut I am going to make some Dark Chocolate Mounds or Almond Joy bars. That's one of the problems living in a small town. Limited supply of some things. LockDoc |
Re: What did you do today not on your truck...
Quote:
|
Re: What did you do today not on your truck...
4 Attachment(s)
finally rid of the ramp rack....can't belive it only took me 10 yrs to ditch it..
threw the rack on a scale, 154 lbs now eliminated. might not sound like much, but the kid's new quad is 400 lbs heavier than his old one, which had us running within a couple hundred lbs of load limit. now we got a little more play in there. trailer popped up about 2 inches with the deck off. Attachment 2178021Attachment 2178022 washed the frame and boards, let 'em sit for a couple days then repaint and seal Attachment 2178023 just for the halibut, decided to run the cut-off wheel over my fingers... Attachment 2178024 |
Re: What did you do today not on your truck...
Quote:
can't move or go anywhere without my shadow...lol |
Re: What did you do today not on your truck...
Quote:
Quote:
My '72 has over the wheelhouse 5th wheel mounts I have yet to remove and I've had the truck since '01. At first I wanted to leave them, but decided they are a nuisance over 10 years ago. A lot of bolts to cut but I really need to do that |
Re: What did you do today not on your truck...
Cutoff wheels and skin aren't a good combo . Last year I had one explode on me working on the 72 .went to truck Carlisle with 3 stitches in my left pointer .
|
Re: What did you do today not on your truck...
2 Attachment(s)
Started to do the valve train on the Chevelle . Found one of the studs to be buggered up at the tip and some of the poly locks so tight I had to use a 3/8 inch ratchet and hex socket to back them off ,after this I have lost confidence in this builder. I’ll have to pick one up a new stud Monday .
|
Re: What did you do today not on your truck...
5 Attachment(s)
I’m running out of pallets . Good thing I get these for free they are pressure treated and have 5/4 decking wood on them . I get them from a friend that sells big equipment . But I estimate by measuring that I have over 20 cord split and stacked . With 5 cord split but in piles and 10 in log form to buck cut and split yet . So approximately 35 cord and a friend called this morning last wind storm nocked down 3 big white oaks and a dozen or so ash trees . Some oak cherry and black walnut that’s been sitting in a pile for close to three years . These were at the bottom little pinky on the outside nice and solid inside
|
Re: What did you do today not on your truck...
1 Attachment(s)
...cries inside, seeing black walnut run up a chimney as smoke.
Here's a tool chest I built out of black walnut... |
Re: What did you do today not on your truck...
3 Attachment(s)
Having 2 barn style sheds built. First one went up today, roof, doors, and window will be finished up tomorrow. Then I will paint them to match the house.
|
Re: What did you do today not on your truck...
Quote:
|
Re: What did you do today not on your truck...
Quote:
I do mill the nice trees but some trees are just not nice enough. On an arborist board I'm on we kid about Highly Valuable Black Walnut . Some is good for milling and some is to twisted or cracked . I wont even try milling a yard tree or roadside always full of nails . |
Re: What did you do today not on your truck...
Quote:
Quote:
|
Re: What did you do today not on your truck...
-
Quote:
Quote:
LockDoc - |
All times are GMT -4. The time now is 08:46 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com