![]() |
New project
1987 S-10 will be Forged 385 , TH350 , 9" Ford caltracs truck on 275 / 60 / 15 drag radial .
http://i47.photobucket.com/albums/f1...1020100005.jpg http://i47.photobucket.com/albums/f1...1020100006.jpg http://i47.photobucket.com/albums/f1...1020100004.jpg |
Re: New project
I thought we had talked you into a full size truck.:confused::confused:
|
Re: New project
Cool....Are you going to have a build thread?
|
Re: New project
Quote:
Quote:
I will put together a build thread . This will be my forged 383 set up with 150 in the fogger and 150 in the plate to start with . |
Re: New project
I dont care if it's full sized or not. Nice project :phat:
Shawn |
Re: New project
Found out last night that the block needed 2 sleexes at .030 and 1 at .040 . I spent $670 on SRP pro series pistons , so 2 sleeves it is . I m also dropping off the cam for clearencing tomorrow . Crower sportsman rods and eagle lightweight 4340 crank all balanced . My neighbor came over yesterday and ask if i would help him haul off an old transmission . Turns out it is a 73' TH 350 out of his truck . He had the dealership rebuild it and the service tech talked him into a 700r4 swap and did it as a side job . Turns out the trans has only been sitting 3 years and has low miles . I'll shoot some pics of the current state of the motor and try and update .
|
Re: New project
looking forward to the updates....
|
Re: New project
wouldn't it be much cheaper to find another block?
|
Re: New project
Quote:
Visual update for saturday .Sorry for the crappy pick of the block it was in the bore machine . Pics of the lightweight forged crank and JE pro series pistons . http://i47.photobucket.com/albums/f1...ownsize-12.jpg http://i47.photobucket.com/albums/f1...ownsize-11.jpg http://i47.photobucket.com/albums/f1...430101057b.jpg http://i47.photobucket.com/albums/f1...0430101058.jpg http://i47.photobucket.com/albums/f1...downsize-9.jpg http://i47.photobucket.com/albums/f1...ownsize-10.jpg |
Re: New project
Having a good buddy as a machinist, could have got a 2bolt and had him splay it. Would be better then any stock 4bolt. What ever happened to that 396 you built?
|
Re: New project
Quote:
I sold the 396 with the Luv . The guys that bought the truck are strictly grudge racers so im hesitant to discuss it as it is their race program now . I will tell you that is runs good and is out of the Houston area . The truck has been repainted as the new owners have a body shop . They just bought a proven combo with all my notes and repainted it and showed up in a different area as unknowns . |
Re: New project
Nice, that little thing had to be a bit scary.
|
Re: New project
Quote:
Got the new rim combo on the gray truck today and did a suspention lookover . http://i47.photobucket.com/albums/f1...wheels0003.jpg |
Re: New project
I ended up listing the old body for my golf cart on Craigslist and the guy who is to replace the ends on my 9" shows up to buy it . Well a little horse trading and he is going to replace the ends on one housing and narrow another housing for the golf cart body .
Ordered the converter and dropped of the trans local for a rebuild . Here's a link to the converter . Hoping i didn't go to tight , but still street worthy . http://transmission-specialties.com/...products_id=56 Also looking for opinions on this companies converters . Going parts hunting tommorow also . |
Re: New project
Sleeves are in and its ready for final hone . Also took a picture of the rods .
http://i47.photobucket.com/albums/f1...eparts0001.jpg http://i47.photobucket.com/albums/f1...eparts0002.jpg http://i47.photobucket.com/albums/f1...eparts0003.jpg |
Re: New project
My Machinist called me this afternoon and told me he just knocked the last piston in it . I usually assemble them ( motors) , but i think He's pretty proud of this one . This is one of the best pieces i have ever built . He said the deck was so far off his machine couldn't cut it . It was .018 in the front and .031 in the rear . It's zero now . Told me bring the rest of the stuff and we'll finish it up sometime this week . Matt called me this afternoon and told me Kenny Hubbard (another local all around good guy) is ready to build the trans , so i gotta haul that to him coming up . Been working on small stuff like pre plan for radiator . Researching the A/C parts needed to convert to 134A . Also got all the stuff together to build Rick's center section . Looking like i will have some time next week to relax and get busy . This type of work is relaxing and gives me a sense of acomplishment .
|
Re: New project
you are putting air on the race truck?
|
Re: New project
Yea , it has air , so im keeping it . It will see some street duty with drag radials and it's light enough those couple of extra pounds won't hurt to much + im getting older :lol:. Hopefully i have enough vacuum for power brakes .
|
Re: New project
How much does it weigh?
|
Re: New project
I will scale it soon and let you know .
|
Re: New project
Well i got the shortblock back and the timing cover and balancer on . The lifters are in and the oil pump and windage tray should be in tommorow .
http://i47.photobucket.com/albums/f1...roject0011.jpg http://i47.photobucket.com/albums/f1...roject0001.jpg http://i47.photobucket.com/albums/f1...roject0009.jpg http://i47.photobucket.com/albums/f1...roject0008.jpg |
Re: New project
looks like a fun project, subscribed!
|
Re: New project
Nice project- looking forward to hearing it. That's my favorite color, grey.
|
Re: New project
Not much of an update , but a new picture . i welded up the oil pump pickup and installed the pan . Got a new copper washer for the oil plug . The heads are on and torqued . Timing chain cover wasn't my first choice , but i had it and it was new in the box . Hoping to have the intake and valve train buttoned up by the end of the weekend . Headers and mounts should be here soon . Plaining the install the weekend of the 25th .
http://i47.photobucket.com/albums/f1...nsize-11-1.jpg |
Re: New project
Looking good, that thing should be fun to drive.
|
All times are GMT -4. The time now is 09:18 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com