Project 68 k10 LWB..aka "The Hulk"
 

Hello everyone.
I picked up a 68 k10 for my youngest son he called it the hulk. So I thought I would try my hand at an official build thread.
Hopefully works out.
This picture is the first picture I took of it on the way home.

Re: Project 68 k10 LWB..aka "The Hulk"
 

Parked out front.

Re: Project 68 k10 LWB..aka "The Hulk"
 

The first picture my son took and posted it on one of his social media phone apps.

Re: Project 68 k10 LWB..aka "The Hulk"
 

It has the original 307 with a SM465 the was installed in the 80's I was told. It has the original Rockwell t221 (I think). No power anything. Basicly base model. It's was a rock quarry truck up north in California.

On the way through red bluff from picking it up. I was looking on Craigslist and found a 1973 front axle complete so I picked it up also.

I didn't get any pictures of it before I started tearing into it. It was my first time rebuilding a complete front end. Replaced everything I could on it that even looked suspect. So I sould not have any problems with it.

Re: Project 68 k10 LWB..aka "The Hulk"
 

This is my son he is 15 and a freshman. He is priming the front axle.

Re: Project 68 k10 LWB..aka "The Hulk"
 

Front axle with the steering knuckle with new ball joints. Oh and my homemade axle spreader!

Re: Project 68 k10 LWB..aka "The Hulk"
 

He wanted to paint the rebuilt calipers red.

Re: Project 68 k10 LWB..aka "The Hulk"
 

Here are the new front hubs and rotors painted up with high heat paint. Not sure if they will last but thought why not try it.

Re: Project 68 k10 LWB..aka "The Hulk"
 

Removed and cleaned up the axle shafts and installed new u joints. Waiting to go in the axle

Re: Project 68 k10 LWB..aka "The Hulk"
 

I picked up a np241 transfer case from a 1990 chevy suburban. It has the passenger side drop with an electric speed sensor. I am going to install a 2008 ly2 with a 4L60e (ls swap). I rebuilt the TC but didn't have a camera with me as I was doing it.

Re: Project 68 k10 LWB..aka "The Hulk"
 

I'm in looks like a cool build. I hope your son is not into 4 wheeling if he is you will find your self repairing some of the parts, I was hard on my truck when I bought my first wheeler at 17 broke just about every thing twice until I installed 1 ton running gear.

Re: Project 68 k10 LWB..aka "The Hulk"
 

Thanks for the comment.
The plan for me with the truck build and him working on it is if he spends his time on it he should take care of it. If he breaks it he will have to fix it and pay for it.
Things break as I have done it myself many times. The education was having to repair things because I made a bad decision.... We are not getting to crazy just going for reliablity.

Re: Project 68 k10 LWB..aka "The Hulk"
 

Picked up a all steel bed for pretty cheap.

Re: Project 68 k10 LWB..aka "The Hulk"
 

Motor is here! Here we go!!!!

Re: Project 68 k10 LWB..aka "The Hulk"
 

Disassembled everything off the motor and pulled the valve cover. Looks pretty clean. The motor said to have 83k on it.

Re: Project 68 k10 LWB..aka "The Hulk"
 

awesome!

Re: Project 68 k10 LWB..aka "The Hulk"
 

The engine look good for 83K the one I got for my truck was worse than that. the P.O. had a turbo on it and ran it hot and crack ring grooves on 2 pistons. I ended up replacing all my pistons.

Re: Project 68 k10 LWB..aka "The Hulk"
 

My grandson loves the HULK, great name for the green machine! Here's hoping for no HULK SMASH!

Re: Project 68 k10 LWB..aka "The Hulk"
 

Well put my sons to work yesterday prepping the motor and trans for paint. Just need to finish painting the trans cast aluminum color.

Re: Project 68 k10 LWB..aka "The Hulk"
 

Here's another one

Re: Project 68 k10 LWB..aka "The Hulk"
 

Can anyone tell me what this is? I don't remember seeing this on the last LS swap I did? Is this factory in 2008? Or has the motor been worked on at some point?

Re: Project 68 k10 LWB..aka "The Hulk"
 

I have a 2004 LS 5.3 and I don't recall seeing that piece.

Re: Project 68 k10 LWB..aka "The Hulk"
 

http://67-72chevytrucks.com/vboard/s...d.php?t=660508
Dwilbur check out this thread. I asked the same question in the LSswap section.

Re: Project 68 k10 LWB..aka "The Hulk"
 

My engine has 706 heads witch I had Total Engine Airflow do stage 2 mods on. it sound like the heat censor was on the 243 heads. ?

Re: Project 68 k10 LWB..aka "The Hulk"
 

This is an updated picture of the np241 passenger side drop transfer case after I conpletely rebuilt it.