![]() |
Our '66 Short Fleet Build
5 Attachment(s)
I got a set of rear wrangler coils, just got them on today
here is before Attachment 362073 and after Attachment 362074 another before Attachment 362076 couple more afters Attachment 362077 Attachment 362078 It was quite a biotch to get the original spring bolts out, ended up breaking 3 out of 4 bolts and grabbed the port-a-band and cut the coils out so i could use the impact on the upper bolts. my pass. side bolt was rusted pretty solid in the arm, so the head just twisted off, lots of fun, these arms are one heck of a rust trap:lol: I put new shock all around, and let me tell you the ride is night and day difference. After my sons and i got it all back together, the wife kids, including the dog:lol:, and I went for a ride in the country:thumbs: all of my old shocks were plum wore out. it had coil overs in the rear and would bounce like crazy. I know, I know, the rear is lower than the front, but i ran out of time, and since I sold my 1990 k1500 to my bro in law, this is my DD and I have to work tomorrow:waah: tomorrow after work I am going to cut the front coils:metal: i will keep y'all posted:smoke: |
Re: Joined the "lowered club"...half way, at least
what are wrangler coils?
|
Re: Joined the "lowered club"...half way, at least
jeep wrangler TJ 1996-2007, i think?
got them for 20 bones! |
Re: Joined the "lowered club"...half way, at least
whats the deal with them? I take it they work for our trucks? I never heard that before. Cool!
|
Re: Joined the "lowered club"...half way, at least
That's the biggest hood ornament I've ever seen and , isn't it suppose to be on the hood ?
|
Re: Joined the "lowered club"...half way, at least
Quote:
Looks good. About how much drop did you get from those rear coils? How much drop are you looking to get in the front? Yeah, new shocks are definitely a cost effective upgrade. I didn't realize how bad my '64 rode until I rebuilt the suspension on it a few years ago. BIG improvement! |
Re: Joined the "lowered club"...half way, at least
Looks awesome Joe so how do you like it being lowered ? ;)
|
Re: Joined the "lowered club"...half way, at least
salazar, they work nice, supposed to be 3-4 inches of drop, depending on how much your stockers sag. do a search for jeep coils, there are a few people on here that have done the swap, this site is where I found the info...have I mentioned that this place is great!!!! If you want some of these springs, check your local 4x4 shops, they might have some laying around, I put an ad on craigslist and a guy who installs lift kits called me and sold 'em cheap. I also found some on ebay for $0.99 plus shipping
oldblue, haha that's our Mitch, he loves to ride:truck::lol: TimE, :lol:. I got before and after shots, but failed to measure before and after, but I'm guessing I got around 4(or a bit more) inches between the jeep coils and removing the coil over shocks on the rear. Probably need about 2 inches on the front, figure I will start with cutting one coils and go from there. Another thread on here said he cut 1 coil and 3 inches and I believe he said he got 2-2 1/2 inches slammed1966, so far I love it, this is about as low as the wife will let me go, but once I get to work on my '64 I'm going lower:devil: |
Re: Joined the "lowered club"...half way, at least
That looks like a Pit or Boxer Trailer ornament. I have two boxers, one fat boy and one slim and trim. I dont know why he is so big, they eat the same. I will check out the jeep stuff. Looking to get something for the rear... i cut the fronts and now im raking it pretty bad!
so its jeep wrangler TJ 1996-2007 ? anyone else? |
Re: Joined the "lowered club"...half way, at least
Heck ya man looks good! Just wait until you get the front done, then you will deffinatly be able to tell the handling difference! :metal:
|
Re: Joined the "lowered club"...half way, at least
Looking good!! Can't wait to see with the front down...
|
Re: Joined the "lowered club"...half way, at least
Mitch is a Boxican (to use protrash's word :lol:) boxer and american bulldog (not Pit :devil:) mix
yes, can't wait scott Joe, you think you can't wait....:lol: |
Re: Joined the "lowered club"...half way, at least
linky no worky... please post again...tx.
|
Re: Joined the "lowered club"...half way, at least
Alright man where are the pics of the finished project......:lol:
Ya your prob working on it now haha Later, scott |
Re: Joined the "lowered club"...half way, at least
looks sweet Joe..:metal:
|
Re: Joined the "lowered club"...half way, at least
yup looks good , I just installed the ccp 3/5 lowering kit, the rear was a pain, snaped all rear bolts, luck I had some at home, the then the coil was still stuck, torched it and she came out, let me know about your front end.. trying to figure out some alignment specs my front end coils were removed by jacking the front end up the using a jack stand on the frame then remove the ubolts hold the "A" arms attached to the cross memeber then SLOWY lower and the spring falls right out easy job on my 65 now I need to learn how to post pics...
|
Re: Joined the "lowered club"...half way, at least
sorry salazar, can't get the link to work
use the search feature and type in "jeep coils" scott, got held up late at work, wasn't able to get anything done:devil: thanks Morton! thanks Dad'sred, did you have use a adjustable track bar? I never thought about dropping the arm like that, I have always disconnected the lower ball joint to drop the spring. might have to try your way. did the u-bolts come out easy? |
Re: Joined the "lowered club"...half way, at least
Truck looks cool!!!!!! I told you those aliens have already invaded!!! They're all over the place.
After the work on the rear-end, I think I would be coating the front end in penetrating oil all week to get it ready. Heat is headed your way.......110* today. |
Re: Joined the "lowered club"...half way, at least
:lol::haha::lol:
well the front end is mid-80's so i am hoping it is easier to work with :lol: we hit like 95* today, summer is 'bout here :devil: |
Re: Joined the "lowered club"...half way, at least
sweet man... looks like with summer coming, everyone is starting to get the ball rolling on their projects!
|
Re: Joined the "lowered club"...half way, at least
4 Attachment(s)
got it all the way
here are a couple teasers, i will try to get some shots in the daylight tomorrow Attachment 362663 Attachment 362664 Attachment 362665 and a shot of what is left of my rear coils i shall call it "the aftermath of joe" :lol: Attachment 362666 |
Re: Joined the "lowered club"...half way, at least
Looks good Joe. Looks like you pulled the coils out the "easy" way.:haha:
|
Re: Joined the "lowered club"...half way, at least
thanks TimE
:haha: if that was the easy way, i never wanna do it the hard way:haha: |
Re: Joined the "lowered club"...half way, at least
5 Attachment(s)
some after pics in the daylight
Attachment 362829 Attachment 362830 Attachment 362831 Attachment 362832 Attachment 362833 |
Re: Joined the "lowered club"...half way, at least
:clap:
|
All times are GMT -4. The time now is 10:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com