![]() |
How about some pics of bagged 47-59
I know the 47-59 crowd has their fair share of bagged and layed out trucks as well, it would be great to compile our images all in one thread. Show us what you got.
|
Re: How about some pics of bagged 47-59
Here,s mine have it apart right now getting ready for paint
http://67-72chevytrucks.com/vboard/p...ictureid=14928 |
Re: How about some pics of bagged 47-59
Looks awesome bootlegger!
Posted via Mobile Device |
Re: How about some pics of bagged 47-59
3 Attachment(s)
Here's one we built for a friend of mine last year.
|
Re: How about some pics of bagged 47-59
3 Attachment(s)
Wayne.... I never get tired of seeing that sweet burb.
Here are a few of my 48.... |
Re: How about some pics of bagged 47-59
Quote:
|
Re: How about some pics of bagged 47-59
3 Attachment(s)
Heres a pi of my burb almost complete.chizzler
|
Re: How about some pics of bagged 47-59
That GMC is SICK!!!!!!!! You nailed it...
Posted via Mobile Device |
Re: How about some pics of bagged 47-59
Chizzler-
I like the yellow headlights. Is that a yellow film our did the lights come that way? Looking good. Marc |
Re: How about some pics of bagged 47-59
thanks junk.dont copy me know mark.j/k.your truck would look good with them.got them off ebay.we also added some park lights in them.
|
Re: How about some pics of bagged 47-59
Quote:
Do you have any close up pictures of your fuel door, and how you did that. Thanks Posted via Mobile Device |
Re: How about some pics of bagged 47-59
Quote:
|
Re: How about some pics of bagged 47-59
Quote:
Glad you liked it.. Hope this helps. Wayne |
Re: How about some pics of bagged 47-59
Quote:
Marc |
Re: How about some pics of bagged 47-59
Thanks for the complements Wvgearhead and nacho55. nacho the gas door is from a 90's Mopar mini van. When I cut it out I cut about 6 inches larger than the door opening was.Get as much or all of the door release cable as you you can and the filler neck. I hooked my release cable to a door actuator. Drill out the spot welds that hold the inner pocket to the outer 1/4 panel. Trim 1/4 panel piece down to about 1 inch around gas door opening. Step flange the edge and cut a hole in box that it will fit tightly into where it will work best.Position inner pocket on little ears that were left on 1/4 panel after pocket was removed and weld it back on.Prime all pieces as you put it all back together and seam seal bucket to box side. A Hagan gas cap will work on these filler necks.
|
Re: How about some pics of bagged 47-59
5 Attachment(s)
|
Re: How about some pics of bagged 47-59
Quote:
|
Re: How about some pics of bagged 47-59
1 Attachment(s)
One of my favorites.
Courtney “Tito” Halowell's truck,... |
Re: How about some pics of bagged 47-59
1 Attachment(s)
I like it better with blackwall tires,...
|
How about some pics of bagged 47-59
Lets see pics of those slammed and bagged 47-59's. Show us what you got.
|
Re: How about some pics of bagged 47-59
Quote:
|
Re: How about some pics of bagged 47-59
Great pics. Here is mine, it is pretty low... ;)
http://67-72chevytrucks.com/vboard/c...pic64784_2.gif I am hoping to make some progress this weekend with a tad of photographic evidence of said progress. |
Re: How about some pics of bagged 47-59
I friends truck sporting her new shoes, and first show for the season.
Neal, |
Re: How about some pics of bagged 47-59
|
Re: How about some pics of bagged 47-59
|
All times are GMT -4. The time now is 01:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com