61 Ford unibody project
2 Attachment(s)
I bought this 1961 ford uni about 16 months ago.Plans are 302 motor c4 trans MM2 front end disk brakes front back gona leave as much of the original patina as I can (fix all rust holes).air ride front and back.
As I brought it home.I had put shoes new shoes on her in this pic. Jake |
Re: 61 Ford unibody project
1 Attachment(s)
The inline 6 was froze up and missing its head and other parts so the front end came off as well as the inline 6 and 3 on the tree.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
See ya straight axle ect.On went the MM2.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
To get the truck on the ground I had to Z the frame 2 1/2 inches.plated the inside of the frame allso.Made the cups for the top and plated the bottom arms.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Put it together for fun.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
On to the rear.Used a Grant Fab notch kit.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Put on a 2000 8.8 disc rear triangulated 4 link and some top bottom bag brackets I got off ebay.Relief cut welded and smoothed the square tube cross members ect.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Put in a Flaming river tilt ss column and hooked up steering.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Mocked up the 302 motor.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Made trans mount.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Boxed the rest of the frame.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Cut out the bottom of the cab and torque box so the drive shaft would clear all the way down.And welded it all back up when I was sure the driveshaft fit.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
A pic of it on the ground.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Along the way I have done lots of rust repair on the steps body ect.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Had some stripes done.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Tailgate.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Hood
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Had the seat recovered by my great uncle Bob Sipes.He allso made a white boot or my Lokar shifter.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
I have been buying parts for my motor so it and the c4 can go to the machine shop for a rebuild.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
So this where I am to date next is to take the front end off paint the fire wall add a few gussets to the motor mounts the mm2 front end fish plate the out side of the Z.Add shocks and shock mounts.Paint the frame ect.Get the motor and trans rebuilt put in my new rebel wire kit ect ect ect ect.
Jake |
Re: 61 Ford unibody project
That is nice!
|
Re: 61 Ford unibody project
1 Attachment(s)
So close but so far Ha.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Wheels are Vintique 15x7 in front and 15x8 rear with 48 ford caps.Tires are 205 70s.
Jake |
Re: 61 Ford unibody project
Quote:
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Most resent pic waiting for tear down.the rear is getting a steeped up style full floor but I want to get it on the road first.
Jake |
All times are GMT -4. The time now is 01:06 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com