The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   1970 GMC Stepside Redbuild (https://67-72chevytrucks.com/vboard/showthread.php?t=302043)

mas09ts 08-06-2008 01:15 AM

1970 GMC Stepside Rebuild
 
http://widget.slide.com/rdr/1/1/3/W/...N34XBZCIcR.jpg

mas09ts 08-06-2008 01:20 AM

Re: 1970 GMC Stepside Redbuild
 
http://widget.slide.com/rdr/1/1/3/W/...QsJSPqGp_T.jpg
http://widget.slide.com/rdr/1/1/3/W/...MUR4qRv7iq.jpg
http://widget.slide.com/rdr/1/1/3/W/...HPwxeZD8Mv.jpg
http://widget.slide.com/rdr/1/1/3/W/...9AUSLPNZbS.jpg
http://widget.slide.com/rdr/1/1/3/W/...4u4VKH_3Nw.jpg
http://widget.slide.com/rdr/1/1/3/W/...9BE1ijyFkU.jpg
http://widget.slide.com/rdr/1/1/3/W/...E8f8aaIK8R.jpg
http://widget.slide.com/rdr/1/1/3/W/...1Fg7eeNtk4.jpg
http://widget.slide.com/rdr/1/1/3/W/...dcRm3IDmcZ.jpg
http://widget.slide.com/rdr/1/1/3/W/...a6hwuOanvY.jpg

mas09ts 08-06-2008 01:21 AM

Re: 1970 GMC Stepside Redbuild
 
changed the fender and set bed on it
http://widget.slide.com/rdr/1/1/3/W/...RP1qbNx4dl.jpg

mas09ts 08-06-2008 01:22 AM

Re: 1970 GMC Stepside Redbuild
 
swapped the grill with a nicer one
http://widget.slide.com/rdr/1/1/3/W/...ROaKwpUo_Z.jpg

mas09ts 08-06-2008 01:23 AM

Re: 1970 GMC Stepside Redbuild
 
Got the inner walls of the bed done
http://widget.slide.com/rdr/1/1/3/W/...HaCTDJAJA5.jpg

mas09ts 08-06-2008 01:27 AM

Re: 1970 GMC Stepside Redbuild
 
Took the seat, gas tank out today. Also went and got the hood and passenger side door, cowl, front fenders off the same 68 chevy where I got my bed for 65$ a steal.
http://widget.slide.com/rdr/1/1/3/W/...Y08j15Vlzb.jpg
http://widget.slide.com/rdr/1/1/3/W/...-7e7ALlFTY.jpg
http://widget.slide.com/rdr/1/1/3/W/...KLeIYI5Y9F.jpg
http://widget.slide.com/rdr/1/1/3/W/...Qajx7GDn3U.jpg

mas09ts 08-08-2008 12:49 AM

Re: 1970 GMC Stepside Redbuild
 
Got My Cab Corners in Yesterday, First Pic has my little helpers in it.
http://widget.slide.com/rdr/1/1/3/W/...BKXoSLP1zA.jpg
Driver's Side Corner
http://widget.slide.com/rdr/1/1/3/W/...rWTESfrg4X.jpg
Passenger Side Corner
http://widget.slide.com/rdr/1/1/3/W/...pzaMxjxh94.jpg
Rear of Cab
http://widget.slide.com/rdr/1/1/3/W/...wwOGOLcaPG.jpg

mas09ts 08-08-2008 12:52 AM

Re: 1970 GMC Stepside Redbuild
 
When I replaced that driver's side fender it didn't have a place for the parklamps, so I cut out a hole then welded in a bracket from another fender.
http://widget.slide.com/rdr/1/1/3/W/...vvlP6_4Q41.jpg

mas09ts 08-08-2008 12:56 AM

Re: 1970 GMC Stepside Redbuild
 
Also got the passenger side rocker panel welded in.
http://widget.slide.com/rdr/1/1/3/W/...zU3FBR0tAb.jpg

mas09ts 08-08-2008 12:59 AM

Re: 1970 GMC Stepside Redbuild
 
just another picture
http://widget.slide.com/rdr/1/1/3/W/...DcA83X6GrC.jpg

retselgerg 08-08-2008 09:03 AM

Re: 1970 GMC Stepside Redbuild
 
nice start, where about in sw va did you live?? im from Grundy

mas09ts 08-08-2008 09:10 PM

Re: 1970 GMC Stepside Redbuild
 
Quote:

Originally Posted by retselgerg (Post 2840755)
nice start, where about in sw va did you live?? im from Grundy

Gate City

mas09ts 08-13-2008 10:52 PM

Re: 1970 GMC Stepside Redbuild
 
A little progress in 2 weeks
http://widget.slide.com/rdr/1/1/3/W/...Bn72UhQ5Wu.jpg
found a bumper
http://widget.slide.com/rdr/1/1/3/W/...SxystKQ8Kt.jpg
http://widget.slide.com/rdr/1/1/3/W/...NrCgPydcQk.jpg
got the cab corners done (almost)
http://widget.slide.com/rdr/1/1/3/W/...sn7O_jKK5z.jpg
http://widget.slide.com/rdr/1/1/3/W/...1x9k7vmTqg.jpg
http://widget.slide.com/rdr/1/1/3/W/...wW6mcj6ZDC.jpg
got the parklamp fixed
http://widget.slide.com/rdr/1/1/3/W/...1fY25zfM4p.jpg
stripped and painted my rear bumper (notice the chevy tailgate, which I need to change to G.M.C.)
http://widget.slide.com/rdr/1/1/3/W/...cTFPi9SPvG.jpg
http://widget.slide.com/rdr/1/1/3/W/...c_DTeS3Ck-.jpg
found me some cab supports for 50$ keepin the old grill just in case
http://widget.slide.com/rdr/1/1/3/W/...bSXQkrMIFx.jpg

mas09ts 08-17-2008 12:34 AM

Re: 1970 GMC Stepside Redbuild
 
Put the gas tank back in it today, found a seat from of an 85 blazer for 30$. Finally got the straight 6 to fire which runs great now, after having to take the sending unit out of the gas tank because it was stopped up solid.

mas09ts 08-21-2008 05:31 PM

Re: 1970 GMC Stepside Redbuild
 
Made Some Progress over the past week or so.
http://widget.slide.com/rdr/1/1/3/W/...7OYeR5hp9D.jpg
http://widget.slide.com/rdr/1/1/3/W/...usddsOMfNH.jpg
http://widget.slide.com/rdr/1/1/3/W/...YGqJYTcAVY.jpg
http://widget.slide.com/rdr/1/1/3/W/...5YqfNJQSeu.jpg
http://widget.slide.com/rdr/1/1/3/W/...Xa-WF9uKXR.jpg
http://widget.slide.com/rdr/1/1/3/W/...KPzY0pBnup.jpg
http://widget.slide.com/rdr/1/1/3/W/...dw87_abrEp.jpg
http://widget.slide.com/rdr/1/1/3/W/...csnBlduYb0.jpg
http://widget.slide.com/rdr/1/1/3/W/...Oz7sYahR6q.jpg
http://widget.slide.com/rdr/1/1/3/W/...7fr5NSlJKk.jpg

mas09ts 08-21-2008 05:34 PM

Re: 1970 GMC Stepside Redbuild
 
And a few More Pictures
http://widget.slide.com/rdr/1/1/3/W/...R6jMq-5gbl.jpg
http://widget.slide.com/rdr/1/1/3/W/...xBVJ5gcxQ3.jpg

mas09ts 09-04-2008 09:56 PM

Re: 1970 GMC Stepside Redbuild
 
Over the past couple of weeks I have got my corners and rockers welded in. Painted the frame, installed new shocks, new Thrush exhaust, painted rear bumper ...again. Installed new smooth tailgate. Started painting on my engine, still have to paint the inner fenders and firewall and radiator support. Some progress pics . . .

http://widget.slide.com/rdr/1/1/3/W/...78f_0pEPuX.jpg
http://widget.slide.com/rdr/1/1/3/W/...L6GnUd4hJ3.jpg
http://widget.slide.com/rdr/1/1/3/W/...KVRw6o9dd7.jpg
http://widget.slide.com/rdr/1/1/3/W/...3zonJeeE8c.jpg
http://widget.slide.com/rdr/1/1/3/W/...SSZqHTV2k8.jpg
http://widget.slide.com/rdr/1/1/3/W/...T2lG6a4Gif.jpg
http://widget.slide.com/rdr/1/1/3/W/...FJVyA3vHUG.jpg
http://widget.slide.com/rdr/1/1/3/W/...iL0rj32Nn8.jpg
http://widget.slide.com/rdr/1/1/3/W/...9zaqra1z1J.jpg

mas09ts 09-04-2008 09:57 PM

Re: 1970 GMC Stepside Redbuild
 
Engine Before

http://widget.slide.com/rdr/1/1/3/W/...ODGUDYuyZr.jpg

Engine After (well so far)

http://widget.slide.com/rdr/1/1/3/W/...FXTzI1jvEi.jpg

thirdstreettito 09-05-2008 08:27 AM

Re: 1970 GMC Stepside Redbuild
 
Lookin good man! Keep it up!

samwise68 09-05-2008 11:24 AM

Re: 1970 GMC Stepside Redbuild
 
You're really making headway on that ol' girl!


I might've missed it, but what're the final plans for the truck. Like..color? etc.

Can't wait to see 'er all done up nice man, which from the pace you're going, won't be long at all.

-Sam.

raggedjim 09-05-2008 11:56 AM

Re: 1970 GMC Stepside Redbuild
 
Looking good. Are you going to use the 67-68 hood? If so you'll need a topbar and hoodlatch from a 67-68 GMC also.

Rg

mas09ts 09-05-2008 04:20 PM

Re: 1970 GMC Stepside Redbuild
 
Quote:

Originally Posted by samwise68 (Post 2877636)
You're really making headway on that ol' girl!


I might've missed it, but what're the final plans for the truck. Like..color? etc.

Can't wait to see 'er all done up nice man, which from the pace you're going, won't be long at all.

-Sam.

Not sure on the final color yet, it gonna be a driver. Thanks

mas09ts 09-05-2008 04:20 PM

Re: 1970 GMC Stepside Redbuild
 
Quote:

Originally Posted by raggedjim (Post 2877653)
Looking good. Are you going to use the 67-68 hood? If so you'll need a topbar and hoodlatch from a 67-68 GMC also.

Rg

I'm not gonna use the 67 hood, I just have it because it came of the truck where I got my bed.

ChaseDale3and8 09-05-2008 05:48 PM

Re: 1970 GMC Stepside Redbuild
 
You do really nice bodywork. That old truck sure is looking great so far! Can't wait to see it in new paint. Are you going to paint it yourself or have it done? ...Joe

mas09ts 09-06-2008 03:33 PM

Re: 1970 GMC Stepside Redbuild
 
Got the engine all painted up yesterday evening.

http://widget.slide.com/rdr/1/1/3/W/...f9O3kKG3-p.jpg
http://widget.slide.com/rdr/1/1/3/W/...u3ltU51S3o.jpg
http://widget.slide.com/rdr/1/1/3/W/...0jm4OkjIC6.jpg


All times are GMT -4. The time now is 02:32 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com