|
My 70 is allmost complete "allmost"
Well here it is, the motor is all in and it just needs some fine tuning,
got the top on the other day and well get some pics up of that allso. http://i303.photobucket.com/albums/n...r/DSC02010.jpg http://i303.photobucket.com/albums/n...r/DSC02006.jpg http://i303.photobucket.com/albums/n...r/DSC02654.jpg http://i303.photobucket.com/albums/n...r/DSC06048.jpg http://i303.photobucket.com/albums/n...r/DSC06047.jpg there is also a you tube video under 70blazer1, that was before the ps pump was replaced Let me know what you think |
Re: My 70 is allmost complete "allmost"
That's incredible!!! Is that a stock LS2 or has it been modified at all?? Love the paint job.
|
Re: My 70 is allmost complete "allmost"
It is a 5.3 with a zo6 intake, throttle body and oil pan.
i went with those covers because they are a close match to the body color, just a little darker. |
Re: My 70 is allmost complete "allmost"
Quote:
|
Re: My 70 is allmost complete "allmost"
I thought about that, that other people would think i was trying to pass it off as that.
but i might even epoxy the ls2 and havit smoothed. But i well see, i still ahvent even drivin it on the street yet. |
Re: My 70 is allmost complete "allmost"
The paint and flames look awesome!
|
Re: My 70 is allmost complete "allmost"
Looks good. what size tire and how much lift?
|
Re: My 70 is allmost complete "allmost"
The wheels are 18,s and the tires are 35,s
the lift is four inches and give or take an inch and a half for the larger axles. |
Re: My 70 is allmost complete "allmost"
WOW!!!!!!! Nice
|
Re: My 70 is allmost complete "allmost"
:phat:
|
Re: My 70 is allmost complete "allmost"
Quote:
|
Re: My 70 is allmost complete "allmost"
I think its Beautiful.
Hell Leave the LS2 on it. what they dont know wont hurt you. unless they ask then you cant lie to them. |
Re: My 70 is allmost complete "allmost"
That is a beautiful color...and the ghost flames are a nice touch too!
|
Re: My 70 is allmost complete "allmost"
the axles are dana 50 off a 200 superduty, needed the drivers side pumpkin for the 4l60e to bolt up right, four wheel disc and fox shocks with a double on the hoop up front
The shop that did the axleswaphad said it would give me some lift these new one compared to the stock make the stock look super tiny http://i303.photobucket.com/albums/n...r/DSC02008.jpg |
Re: My 70 is allmost complete "allmost"
Quote:
|
Re: My 70 is allmost complete "allmost"
wow very nice
|
Re: My 70 is allmost complete "allmost"
That is stunning!!!!!! Very stunning!
|
Re: My 70 is allmost complete "allmost"
Beautiful truck! Can't wait to see it when it's finished! ...Joe
|
Re: My 70 is allmost complete "allmost"
Keep up the good work! Looks GREAT!
|
Re: My 70 is allmost complete "allmost"
I missed the flames the first time as well.
Beautiful truck!! |
Re: My 70 is allmost complete "allmost"
|
Re: My 70 is allmost complete "allmost"
Sweet ride!
Any trick mods done to the floor to support those shoulder belt seats? |
Re: My 70 is allmost complete "allmost"
For the seats in the front 2 inch wide flat metal strips were welded down and the bolts run thru the bottom up through the seat brackets.
The two in the rear are out of a cadillic cts with built in belts those had to have a cup made in the floor for the front to hook into then the rear has a bolt through the floor and a small bracket welded to the back of one of the tracks then bolted through the floor. |
Re: My 70 is allmost complete "allmost"
How'd this build come out? (just found it while cruising thru the LS swap thread)
|
Re: My 70 is allmost complete "allmost"
nice job you done there wish mine was like that some day
|
| All times are GMT -4. The time now is 03:30 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com