The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   CA Parting 70 CST20 (https://67-72chevytrucks.com/vboard/showthread.php?t=468296)

KrazyRay 06-06-2011 08:46 PM

Parting 70 CST20
 
5 Attachment(s)
Next up is a pretty well equipped truck. It has been sitting in the black berries
since 1985 so I can't imagine that any of the seals/gaskets are any good. It was in a front end wreck that ruined most of the right front of the body and bent the frame horn a bit. Please respond in thread to avoid confusion.
Thanks,
Ray

core engine- $100 local SOLD
core th400 trans- $50 local SOLD
complete doors- $100 each (I don't want to break these down)
small block engine towers- $20 shipped
power steering brackets- $40 shipped
seat belts with no center belt- $26 shipped...they are dirty, but not torn up
cargo light with wires- $30 shipped...crack in lens, chrome worn on top SOLD
crank, water pump pulleys- $52 shipped
a/c brackets- $100 shipped...all 7 are there SOLD, but I have another set.
hood bowtie- $13 shipped...crack in the blue section not bad SOLD
manual throttle- $32 shipped...complete knob to pedal bracket SOLD
cloudy mirror- $15 shipped
a/c vents...all 3 on dash, 2 defrost driver condition- $36 shipped SOLD
a/c engine side air box no broken tabs- $50 plus shipping
instrument cluster- $20 plus shipping
rear gas tank (suburban?)- $75 plus shipping
auto steering column- $50 plus shipping
th350 shift linkage complete column to trans- $30 plus shipping
glove box lid- $15 plus shipping SOLD
AT crossmember- $20 plus shipping
1 1/16 sway bar with frame brackets- $30 plus shipping
switches and lighter with CST knobs- $30 shipped for all PENDING
aux. gas filler cover- $20 plus shipping...DeadheadNM is first up SOLD
tool stowage- don't know yet as I haven't cracked it open SOLD
front drum brake setup- about 11 cents per pound;) CORRECTION- 11 1/2 cents and gone!

DeadheadNM 06-06-2011 08:50 PM

Re: Parting 70 CST20
 
Ray:

Interested in all the aux tank parts that can be shipped. Does the truck have the dash switch/harness to toggle between sending units?

Thanks!

DeadheadNM 06-06-2011 08:51 PM

Re: Parting 70 CST20
 
I also need one nice below eyeline mirror head.

KrazyRay 06-06-2011 08:51 PM

Re: Parting 70 CST20
 
5 Attachment(s)
pics

teeitup 06-06-2011 08:55 PM

Re: Parting 70 CST20
 
Ray, interested in manual throttle setup if its all there. Thanks Randy

KrazyRay 06-06-2011 08:57 PM

Re: Parting 70 CST20
 
5 Attachment(s)
more

Vintage Windmills 06-06-2011 08:59 PM

Re: Parting 70 CST20
 
Interested in the CST 20 emblems. How much for them shipped to 55344?

KrazyRay 06-06-2011 09:02 PM

Re: Parting 70 CST20
 
5 Attachment(s)
sksk

Vintage Windmills 06-06-2011 09:04 PM

Re: Parting 70 CST20
 
Also the glovebox door pending pics of SPID and shipping.

KrazyRay 06-06-2011 09:07 PM

Re: Parting 70 CST20
 
5 Attachment(s)
mkay

DeadheadNM 06-06-2011 09:08 PM

Re: Parting 70 CST20
 
Is the antenna in good shape?

Classic Heartbeat 06-06-2011 09:10 PM

Re: Parting 70 CST20
 
I'll take the A/C brackets. How do you want paid? WES

KrazyRay 06-06-2011 09:12 PM

Re: Parting 70 CST20
 
5 Attachment(s)
rdrde

KrazyRay 06-06-2011 09:16 PM

Re: Parting 70 CST20
 
4 Attachment(s)
www.

DeadheadNM 06-06-2011 09:16 PM

Re: Parting 70 CST20
 
Is the in bed spare tire mounting hardware still present?

67/72junkie 06-06-2011 09:52 PM

Re: Parting 70 CST20
 
headliner shipped to 28337?If it comes out unbroken price trim to.Thanks

too much stuff 06-06-2011 09:54 PM

Re: Parting 70 CST20
 
Toolbox door after you figure it out...

KrazyRay 06-06-2011 10:23 PM

Re: Parting 70 CST20
 
DeadheadNM- I will pull those parts and post pics and prices.
Randy- Check post 13 pic...it was all hooked up when pulled. I don't know if the engine side barrel clamp is stock.
Vintage Windmills- The door is about $13 to ship. There is only 1 good emblem...the other is bent. $12 for the good one and free for the bent one. $40 shipped for everything
Classic Heartbeat- a/c brackets are yours. pm sent
Eric- I hope to crack it by Wed.

Thanks,
Ray
Sorry, I took the headliner and in bed tire carrier for myself.

47thriftmaster 06-06-2011 10:30 PM

Re: Parting 70 CST20
 
Interested in both the e-brake pad and trim/brake peddle pad and trim. Thanks, shipping would be to 28327. Pm me total and pay pal info.
http://67-72chevytrucks.com/vboard/a...1&d=1307408186

teeitup 06-06-2011 10:41 PM

Re: Parting 70 CST20
 
I'll take it Ray, Thanks Randy

KrazyRay 06-06-2011 10:49 PM

Re: Parting 70 CST20
 
47thriftmaster- $10 total for both...I can include with vents

Randy- pm sent

Thanks,
Ray

47thriftmaster 06-06-2011 10:50 PM

Re: Parting 70 CST20
 
Sounds good, will add another $10 now.

Biscayne Stocker 06-06-2011 10:54 PM

Re: Parting 70 CST20
 
How much for ALL the A/C stuff, Inside and out side boxes and the vac vents, etc?? thanks Scott

bollybib 06-06-2011 10:57 PM

Re: Parting 70 CST20
 
I'll take that piece of trim at the paint line below the passenger side rear window Post #4 pic 2 (and all the plastic clips) if the price is right shipped to 92011.

FirstOwner69 06-06-2011 11:13 PM

Re: Parting 70 CST20
 
How's the piece of woodgrain trim between the left front wheel and door? If unharmed, price and shipping to 54956. Thanks.


All times are GMT -4. The time now is 08:01 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com