Panel trucks, don't see alot of them on the forum.
 

See alot of Suburban's but not alot of Panels. Pictures?

Re: Panel trucks, don't see alot of them on the forum.
 

Pics and description of my 1ton panel in my sig.

All projects are on hold while my home sale closes and I find new digs (and parking)

Re: Panel trucks, don't see alot of them on the forum.
 

heres a few of my c30 shloooooooong panel

Re: Panel trucks, don't see alot of them on the forum.
 

Here is my 66 http://inlinethumb07.webshots.com/42...600x600Q85.jpg

bagged with a 5.7 TBI and a 700r4

Re: Panel trucks, don't see alot of them on the forum.
 

here is my 64
this is what was left of it last thur night and it went to the scrap yard on fri
http://img710.imageshack.us/img710/8...1108252213.jpg
By rondavid at 2011-08-31
http://img221.imageshack.us/img221/2...n2456qipac.jpg
By rondavid at 2011-08-31
http://img850.imageshack.us/img850/7756/dscn2450w.jpg
By rondavid at 2011-08-31

all that I retained from the old one was the door post with vin and the model plate from the fire wall and will put it back together around those 2 pieces
I have a 66 suburban body but does need a fair bit of rust repair and will just part it out when I get the one down below
http://img202.imageshack.us/img202/5008/dscn2452mw.jpg
By rondavid at 2011-08-31
http://img684.imageshack.us/img684/8224/img0618zc.jpg

I am biking over to Surrey tomorrow to have a look at this one. it would save me a lot of rust repair if it is as good as I was told it was by another fellow that was looking at buying it but forfeited his deposit.the truck come up from e. washington and has an 84 4 x 4 frame under it and was never reg as a 4 x 4 done there. before you can get them registered here they have to go through inspection and I doubt that it will make it. he orig wanted 3500. for it I think and I will pick it up for 1250. if there is minimal rust under there . there is some.
I have a real good front end sheet metal and every other part to put it back together
ron
By rondavid at 2011-08-23
http://img196.imageshack.us/img196/5720/img0617pj.jpg
By rondavid at 2011-08-23
http://img195.imageshack.us/img195/3226/img0619wj.jpg
By rondavid at 2011-08-23

Re: Panel trucks, don't see alot of them on the forum.
 

kc0kfg I like the look of your truck.

Hope you get it Ron. I prefer the look of the tailgate and hatch.

Re: Panel trucks, don't see alot of them on the forum.
 

Not mine but at a local salvage yard.

Keith

Re: Panel trucks, don't see alot of them on the forum.
 

Hmmm i need to post mine up

Re: Panel trucks, don't see alot of them on the forum.
 

http://oi52.tinypic.com/23racd0.jpg

^ this is what PJ looks like; but hopefully he'll look something like this; the color has been chosen, but the pattern (what we leave white) has not been, but this is when we're done; give or take the wheels 'n damage;

click for high-res:
http://i55.tinypic.com/23kstix.jpg

Re: Panel trucks, don't see alot of them on the forum.
 

Here is my 61 Panel !!

http://up.picr.de/8103818zvs.jpg

Re: Panel trucks, don't see alot of them on the forum.
 

I think Dino has the OG panel (original dropmember). Aren't too many like that.

Re: Panel trucks, don't see alot of them on the forum.
 

i have the 2nd Version of the Dropmember and still only one in Germany !!!

sorry for the thread-jack

http://up.picr.de/8104025wnk.jpg

http://up.picr.de/8104026zcf.jpg

Re: Panel trucks, don't see alot of them on the forum.
 

I have a soft spot for the OG look. Nate does beautiful work.

Has anyone cut down a panel to Blazer size? There isn't a 60-66 blazer, is there?

Re: Panel trucks, don't see alot of them on the forum.
 

No factory blazer, but someone shortened a suburban to that size.. no lift off top though.
Posted via Mobile Device

Re: Panel trucks, don't see alot of them on the forum.
 

Now I read somewhere in my literature that there was a Special Delivery with a 96" wheelbase? I know the later Blazers were 106.5. The rear wheel house was right behind the doors. Looked almost clown car like as the proportions were so far off the regular 127" wheelbase. Anyone else hear or see of any?

Re: Panel trucks, don't see alot of them on the forum.
 

Thanks Aero, I have always has a spot in my heart for panels, they do have one drawback in the design, it can be fun changing lanes if you don't have a passenger to look in the next lane.

Re: Panel trucks, don't see alot of them on the forum.
 

that is what mirrors are for
ron

Re: Panel trucks, don't see alot of them on the forum.
 

well I did put a deposit on it. should be home hopefully in about a week and a half. it does need rockers and floor work and a few other little spots. get rid of that 84 frame and get mine under it
have to bring it over on a barge. lot cheaper than taking a truck and trailer over which would be about $450.00 return basic. this way it will be about $225.00
ron

Re: Panel trucks, don't see alot of them on the forum.
 

Sounds like maybe an aircraft hauler or something, like what Jeep had back in the day?

Re: Panel trucks, don't see alot of them on the forum.
 

here is my 1960 panel with a 454 and turbo400

Re: Panel trucks, don't see alot of them on the forum.
 

Yes, yes you do.

Dino, do you have any build shots of yours? I have only seen a few pics of it, one when you first redid the interior a while back.

Re: Panel trucks, don't see alot of them on the forum.
 

I have some build some but i had my panel over 20 years i need to scan some pics

Re: Panel trucks, don't see alot of them on the forum.
 

Saw a good Suburban/ Panel rear bumper on a school bus conversion at the yard I was at today. 64-66 GMC 1 ton super long. No extra doors so everyone went in the front or through the rear. There's a big metal step protecting the bumper but its not attached to it.

amueller454 what wheels are you using?

Re: Panel trucks, don't see alot of them on the forum.
 

they are 15x10's i got from wheel vintiques. I actually ordered them through summit because it was cheaper than going straight to wheel vintiques.

Re: Panel trucks, don't see alot of them on the forum.
 

Here's mine that I picked up this summer.