![]() |
LS swappers, post up your pics!!
Let's get us an epic LS swap pic thread going here! It's already become obvious that there are dozens.... MANY dozens of LS based swaps on the forum. Being able to see each others swaps also gives the next person taking on the task some great ideas.
I'll start off with a few of Fred. 85 GMC, 2006 5.3/4L60E with 3.42's. http://i191.photobucket.com/albums/z...c/P5220132.jpg http://i191.photobucket.com/albums/z...c/P1010182.jpg http://i191.photobucket.com/albums/z...c/P1010186.jpg http://i191.photobucket.com/albums/z...c/P1010208.jpg http://i191.photobucket.com/albums/z...c/P1010214.jpg http://i191.photobucket.com/albums/z...P1010204-1.jpg http://i191.photobucket.com/albums/z...c/P1010212.jpg http://i191.photobucket.com/albums/z...00418-1651.jpg http://i191.photobucket.com/albums/z...c/P1010178.jpg http://i191.photobucket.com/albums/z...c/P1010179.jpg |
Glock your Fred thread inspired me!
This is my 06 4.8 4l60e combo in my 65 Chevy C10. I'm running 3.73 12 bolt rear end. http://farm3.static.flickr.com/2736/...1bc57367_z.jpg http://farm5.static.flickr.com/4003/...5a5d10aa_z.jpg They are the Doug Thorley THY-324Y-C and are originally for 67-72 ls conversion trucks but I haven't had any issues on my 65 with them. I got them here: http://www.dougthorley.com/cartgenie...p?pid=10&cid=2 but I used a promo code which knocked like $75 or $100 off. I found the promo code on this website |
Re: LS swappers, post up your pics!!
4 Attachment(s)
Heres mine. 2006 6.0/4l80e This was just before I tore it back out to do a frame off!
|
Re: LS swappers, post up your pics!!
Nice work guys they really look sweet
Heres a few of mine http://i771.photobucket.com/albums/x...2/SSPX0400.jpg http://i771.photobucket.com/albums/x...2/SSPX0401.jpg http://i771.photobucket.com/albums/x...ungpics132.jpg http://i771.photobucket.com/albums/x...ungpics133.jpg http://i771.photobucket.com/albums/x...ungpics135.jpg http://i771.photobucket.com/albums/x...ungpics134.jpg http://i771.photobucket.com/albums/x...ungpics136.jpg |
Re: LS swappers, post up your pics!!
If only I had a little more money http://i771.photobucket.com/albums/x...2twinturbo.jpg
|
Re: LS swappers, post up your pics!!
mines in the early stages...but here's my '08 LY6 6.0L crate motor with LSX/LS3 dual plane intake for starters!
http://www.lsxtrucks.com/gallery/alb...l_IMG_0937.jpg |
Re: LS swappers, post up your pics!!
1 Attachment(s)
Here is mine. 2005 LS2 from an SSR with T56 6 speed. Off the road for 10 months to make the swap. Picture taken after a little cruise tonight. Tweaking the tune and a punch list of other little things to fix.
TR |
Re: LS swappers, post up your pics!!
4 Attachment(s)
2002 4.8/4l60e Not a show job, but it runs like a new truck. I put the miles on mine getting parts for my other projects. 2000 miles so far. Pictures are from the day I took my first test drive to the dealer to do the crankshaft variation learn. Also threw in a pic of the tired 327 that was replaced.
|
What A cool forum ,all your swaps look great, each has its own unique taste. Thanks Glock,It's a vintage air setup.It went on perfect .The "truss" that goes across the middle is really nice.I have edelbrocks 2 piece timing cover so between the truss,cover & not having to remove the intake ,cam swaps will be a breeze.It came w/ a really sweet ATI balancer also, 2 drawbacks though, the anodizing on the crank & waterpump pullies is not the same color black it's like hard anodized brown & it seems to be lightening in color from just sitting.I called VA & they sent me new pullies out even without recieving the original ones first but the new set is doing the same thing.I have to get some other parts ano'd so I'm just gonna send them w/ that batch.
Mac it was a complete kit incl. the compressor.It went on really nice just a couple of problems w/ it.If you look close the anodizing on the wtr. pump& crank pulleys changed color I've sent them back once & they sent me out a new set even before they got the old set back.Great service but the new set has faded too.I have to send some other stuff to get anod. so I figured I would throw them in w/ the rest of the stuff. The other problem is "& this is a little knit picky" The idler pulley is plastic & the screw for the idler cover is to short it only engages a couple of threads.Both problems are easily correctable but for what this stuff costs I expect it to wipe my behind too!All in all its the best deal going for this type of kit. just my 2 |
Re: LS swappers, post up your pics!!
5 Attachment(s)
Here is mine, 79 GMC Seirra with a 2003 6.0L LQ4 / 4L60E from a Yukon Denali. Love the reliability and performance.
|
Re: LS swappers, post up your pics!!
4 Attachment(s)
85 C20 Suburban with a 2004 5.3/4L60E completed in june of 04. Ive put about 30,000 miles on it since.
|
4 Attachment(s)
if your combo came out of a goat then you have the 65e trans. here's a pic or 2 of mine;)
that is an entropy technology radiator. i got it on ebay. Tony is a great guy to deal with. quit a few people doing ls swaps here on the board have used him, he'll custom make it to any specs you want for a great price w/ e fans and everything:metal: |
Re: LS swappers, post up your pics!!
My motor's not in yet...but I will be using the ECE LSx swap mounting hardware
http://www.lsxtrucks.com/gallery/alb...l_IMG_1012.jpg http://www.lsxtrucks.com/gallery/alb...l_IMG_1007.jpg |
Re: LS swappers, post up your pics!!
4 Attachment(s)
hese is my 02 6.0L with heads, cam, and a maggie 112 supercharger over drinin to runn 15psi of boost.
|
Re: LS swappers, post up your pics!!
|
Re: LS swappers, post up your pics!!
2 Attachment(s)
Here is my baby... Its a 2007 5.3L/4L60 DOD engine out of a Tahoe.. I used performance online's engine mounts and trans cross member kit.. It has 2001 F-body pacesetter long tubes and is tuned with EFI Live ( only have vats disabled for now)..
First times its seen day light in 6yrs.. |
Re: LS swappers, post up your pics!!
This was the first set up
http://73-ls1.com/63truck/1-18-06/engine_bay_01.jpg This is what the current set up looks like (Sorry for the cell phone pics) http://73-ls1.com/63truck/cleanup/12_22_08_02.jpg http://73-ls1.com/63truck/cleanup/12_22_08_01.jpg And the new 418 will look pretty much like the 347 one does.. Just won't see it as long :devil::devil::devil: |
Re: LS swappers, post up your pics!!
Its still not in yet...but you can get an idea of what it'll look like
http://www.lsxtrucks.com/gallery/alb...l_IMG_1040.jpg http://www.lsxtrucks.com/gallery/alb...l_IMG_1036.jpg http://www.lsxtrucks.com/gallery/alb...l_IMG_1037.jpg |
Re: LS swappers, post up your pics!!
Recently got my valve covers on and LS6 intake manifold on. Really cleans up the look. Still have wiring clean up to finish.
http://i149.photobucket.com/albums/s...5/SAM_0166.jpg http://i149.photobucket.com/albums/s...5/SAM_0164.jpg |
Re: LS swappers, post up your pics!!
I made some brackets to mount the coil packs to the frame rail.
for each set of 4, I used 2 pieces of 1/4" all thread and a bunch of nuts to space them out appropriately. Then I took some pieces of scrap sheet metal and made a couple of L brackets and bolted those to the all thread and the frame. The passenger side is back near where the cab frame and truck frame meet. On the drivers side they're kinda under the alternator. I just used some moroso 8mm spark plug wires (with straight spark plug boots) and some Taylor LT1 optispark boots and made up the wires myself. I had to use a 90 degree boot for the #3 spark plug with the way the angles of the spark plug and header tube are, this was the only way to avoid the two touching. Oh, I also used one breather and a PCV valve on them too. I originally used 2 breathers, but it was leaking a very small amount of oil out of one of the breathers, dripping on the valve cover and header and then having that burnt oil smell I didn't want to have. I haven't noticed any leaking oil with the PCV valve. |
Re: LS swappers, post up your pics!!
5 Attachment(s)
Here's mine. L92/6L80e
|
Re: LS swappers, post up your pics!!
2 Attachment(s)
Here's mine in the beginning stages of being mounted in a 1941 GMC on an S10 frame. It's a lot more complicated than I thought it would be...I already had a SBC mounted, but stupidly decided to go LSx.
My extremely complex, overdone mounting brackets are being fabricated this week, hopefully they work out. Now I have to find a smaller oil pan, have headers made (wasn't planning on that!) and do the wiring. Also still need a 4l60e. |
Re: LS swappers, post up your pics!!
2 Attachment(s)
I will get more pics tomorrow! I am building 72 c10 with 2004 5.3 4l80e Trans and 76mm Turbo. I finished building headers tonight. Will keep you updated with the build.
|
Re: LS swappers, post up your pics!!
Mine, 68 C20 with 2005 5.3 and 4l60e. Doug Thorley try y's, homemade engine mount adapter plates based on templates from LS1tech.com. Used 6 cyl towers to move engine back, 68 V8 motor mounts and moved tranny crossmember forward little bit.
http://i894.photobucket.com/albums/a...m/IMG_0564.jpg http://i894.photobucket.com/albums/a...m/IMG_0565.jpg http://i894.photobucket.com/albums/a...m/IMG_0532.jpg http://i894.photobucket.com/albums/a...m/IMG_0472.jpg http://i894.photobucket.com/albums/a...m/IMG_0451.jpg Doing body work now. Just finished welding in new passenger inner and outer rockers, cab corner, a pilar and kick panel, fender support. That was fun. |
Re: LS swappers, post up your pics!!
68GMC, you talkin to me. If so, heres some more pics.
http://i894.photobucket.com/albums/a...m/IMG_0562.jpg http://i894.photobucket.com/albums/a...IMG_0535-1.jpg http://i894.photobucket.com/albums/a...m/IMG_0561.jpg http://i894.photobucket.com/albums/a...m/IMG_0564.jpg http://i894.photobucket.com/albums/a...m/IMG_0535.jpg http://i894.photobucket.com/albums/a...m/IMG_0534.jpg http://i894.photobucket.com/albums/a...m/IMG_0533.jpg http://i894.photobucket.com/albums/a...m/IMG_0532.jpg |
More of the same.
http://i894.photobucket.com/albums/a...m/IMG_0545.jpg http://i894.photobucket.com/albums/a...m/IMG_0543.jpg http://i894.photobucket.com/albums/a...m/IMG_0516.jpg http://i894.photobucket.com/albums/a...m/IMG_0515.jpg Let me know if you need more or an actual measurement for something. Good luck. I did need to massage the seem lip in the tranny tunnel to get more clearance for the vent tube on top of tranny, to avoid rubbing noises later. I like where mine sets. Plenty of room up front. Room behind. Not touching firewall etc. I did have to drill rivets out to move tranny crossmember forward, I think about 2 inches. The oil pan( truck pan) clears the front crossmember with at least a 1/4 inch or more. It hangs below frame though. Mines c20 at stock height, so who cares. Skid pan to come later though. The only problems I had with going this far back were the seem on tunnel needed folded back a little, the Lokar cable for shifter to me is a little short, tight bends. And my Doug Thorley headers dumped right in front of Parking brake cables, so it was tight bends coming out to exhaust. I thank my exhaust man for doing such a good job at that fix. Drive shaft needed shortened, but that fixed my vibration problems. Found out shaft yoke wasn't welded on square from factory I guess. Any questions just ask. Good luck. I'll take some pics of the plates I made for the motor mounts tommorrow. |
Re: LS swappers, post up your pics!!
1 Attachment(s)
heres mine
|
Re: LS swappers, post up your pics!!
...
|
Re: LS swappers, post up your pics!!
3 Attachment(s)
Mine....
|
Re: LS swappers, post up your pics!!
1 Attachment(s)
here's a some what current one...
|
Re: LS swappers, post up your pics!!
The rims are eagle alloy 225's with toyp proxy II.
That is a factory 3 piece escalade covers that have been smoothed by driveway dreams(Gerald) and painted:D thanks for the compliments guys;):metal: |
Re: LS swappers, post up your pics!!
In progress. The block will be blue like the wheels and it will have cast aluminum finned valve covers. That is an NP833 o/d 4-speed behind it. Just finished putting in a 212/218 .522/.529 cam, LS6 springs, and TSP pushrods. Gonna need some less expensive tires for burnouts...
http://farm5.static.flickr.com/4124/...1433013b_b.jpg |
Re: LS swappers, post up your pics!!
2 Attachment(s)
low_84_inchaska - I built a simple box mount for mine that sets up against the rad support, and uses two of the three rad support-to-inner fender mounting holes.
It's since been painted. :D |
Re: LS swappers, post up your pics!!
5.3L and mockup transmission are finally mounted!
Here's the mounts we created. The chassis is 2003 S10, and the engine sits back about 8.5": http://img291.imageshack.us/img291/8729/mountg.jpg http://img153.imageshack.us/img153/4959/mount2.jpg http://img227.imageshack.us/img227/9727/mount3k.jpg What it looks like when attached to the frame (using all existing threaded holes and stock S10 motor mounts) http://img405.imageshack.us/img405/2328/mount4.jpg Finally! http://img825.imageshack.us/img825/5214/mount5.jpg I have a re-worked harness, LS1 intake, fuel rails, injectors, and idler pulley relocation bracket. I have an un-tuned PCM. I bought a F-body oil pan and dipstick tube. I bought F-body manifolds (which aren't going to work either). I still need all of the truck accessories and brackets. Also still need a starter. Also, I still need to cross my fingers, and hope that when we swap oil pans and check the bearings that everything looks ok. I still need an electric fan. I still need a 4L60E transmission (have a lead on one for $50, but needs rebuilt, will probably purchase soon). I assume that I'm going to need a MAF. Also need an air intake tube and filter. This swap will nickle and dime you to death. Don't go into the swap thinking you're going to spend less than $1500. It's just not going to happen. If anybody switched to a F-body or Vette accessory system, and still has the truck accessory drive that they want to sell, please send me a PM. It's going to suck forking out the money for custom headers, but we don't see any way around it. We may try to make our own though... Our next step is mounting the S10 steering column. |
Re: LS swappers, post up your pics!!
5.3L / 72 mm turbo / head studs / rod bolts / LS6 cam / 4L80E and Yank 3400
http://sphotos.ak.fbcdn.net/photos-a...15637_9251.jpg http://sphotos.ak.fbcdn.net/photos-a...15635_8782.jpg http://hphotos-snc3.fbcdn.net/hs039...._6475557_n.jpg |
Re: LS swappers, post up your pics!!
2 Attachment(s)
Here is my LQ4 that will be going in my 85 4X4 burb. Has F body headers and SDPC Hot Truck Series HT1 cam 214/218 555/562lift and 111 LSA. Streat avenger 670 cfm carb and edelbrock duel plain intake. Awaiting fianl clean and assembly and paint.:metal:
|
Re: LS swappers, post up your pics!!
Here's what I got. 01 5.3l, 4l60e classic Performance tubular engine mounts, Sanderson headers.
http://i571.photobucket.com/albums/s...r/DSCF3582.jpg http://i571.photobucket.com/albums/s...r/DSCF3592.jpg http://i571.photobucket.com/albums/s...r/DSCF4270.jpg Check it out! I Just Started a Build thread |
Re: LS swappers, post up your pics!!
5 Attachment(s)
LS1 on K5 and LS1 on 74 C10
|
Re: LS swappers, post up your pics!!
|
Re: LS swappers, post up your pics!!
|
All times are GMT -4. The time now is 06:16 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com