![]() |
68 aka "Chained in Porterbuilt Prison"
5 Attachment(s)
Ok before I get to the meat of this build I would like to say that the project name is actually a big sign of my gratitude to Nate-not a knock! I researched for months and finally decided to purchase his full dropmember kit for my 68. I kid him that I look at lots of vendors still but I always am amazed at what he comes up with next for these trucks---therefore I am "chained" (lol) to his site for what is coming next!!!
Having said that, I am still using other vendors ( some on here) for parts and services in the months to come!! I have been a member here for years but had other projects going but now I am back to the trucks I love and have done in years gone by. This is not going to be as radical as previous trucks but more in line with Superfly's build with a few twists..I appreciate all input as we go down the road--Here's a few pics of where we are at right now with cab bottom blasted-then in epoxy -stock swb frame ready to add nate's parts-still in air about drivetrain but working it out!!! jim |
Re: 68 aka "Chained in Porterbuilt Prison"
5 Attachment(s)
more pics--If your wondering about a partial blast on this cab--it was a 102k original mile -never repainted-still shining blue cab !!! no rust except around blower motor area--no rocker change,no cab corner change needed--Needed bottom blasted and firewall--Looked at 14 trucks before i bought this farm truck out of Brenham tx
|
Re: 68 aka "Chained in Porterbuilt Prison"
Nice can't wait 4 this build 2 take off :metal:
Posted via Mobile Device |
Re: 68 aka "Chained in Porterbuilt Prison"
2 Attachment(s)
Big change from my last 2---Buick went to new zealand--Never painted it--Last time was '71--t-bird went to sweden..............:sexy::sexy:
|
Re: 68 aka "Chained in Porterbuilt Prison"
Good looking cab. This one should be fun
Posted via Mobile Device |
Re: 68 aka "Chained in Porterbuilt Prison"
Very nice project you have going here! That's a sweet rotisserie, and also very nice projects you built and sold. Your cab looks great too!
|
Re: 68 aka "Chained in Porterbuilt Prison"
Quote:
|
Re: 68 aka "Chained in Porterbuilt Prison"
Subscribing to this one.
Very nice cab! |
Re: 68 aka "Chained in Porterbuilt Prison"
Quote:
|
Re: 68 aka "Chained in Porterbuilt Prison"
sheer genius!
Quote:
|
Re: 68 aka "Chained in Porterbuilt Prison"
1 Attachment(s)
Quote:
but if u look at the bare frame pic close-that is 2 $35 motor stands just straightened-some small bars-instant frame rotisserie!! jim |
Re: 68 aka "Chained in Porterbuilt Prison"
^ not as impressive, but close! ;)
|
Re: 68 aka "Chained in Porterbuilt Prison"
Quote:
After all -have u ever had any one say "nice truck but what does the rotisserie look like" LOL jim |
Re: 68 aka "Chained in Porterbuilt Prison"
^ nope - never, anyone that knows me knows, I'm old-fashioned. :metal:
|
Re: 68 aka "Chained in Porterbuilt Prison"
LOOKING GOOD.....waiting for more !!
|
Re: 68 aka "Chained in Porterbuilt Prison"
Subscribed! Can't wait to see where this project goes!
|
Re: 68 aka "Chained in Porterbuilt Prison"
Wow. look at all those perfectly welded porterbuit parts!:lol::lol: Looking forward to this build!
|
Re: 68 aka "Chained in Porterbuilt Prison"
Quote:
|
Re: 68 aka "Chained in Porterbuilt Prison"
Getting in on this... :)
|
Re: 68 aka "Chained in Porterbuilt Prison"
Looks like a GREAT cab. Going to be a sweet truck with that cab and PB parts (also judging by your past projects)
|
Re: 68 aka "Chained in Porterbuilt Prison"
Quote:
|
Re: 68 aka "Chained in Porterbuilt Prison"
Quote:
|
Re: 68 aka "Chained in Porterbuilt Prison"
Quote:
U are 1 of the ones I will lean on during this build for some advice good or bad as we go--Read your posts and like your insight!! By the way -I left out of the car post that the 55 was painted in '71-I never painted it-felt it looked cool with the patina--So did the guy in New Zealand.......jim |
Re: 68 aka "Chained in Porterbuilt Prison"
I SURE HOPE YOU DO !! I am realistic , i know they wont work for everyone and some people might not care for the style or design .....but i hope it solves a very big issue for alot of guys !!
|
Re: 68 aka "Chained in Porterbuilt Prison"
Quote:
|
Re: 68 aka "Chained in Porterbuilt Prison"
well if you insist i will...tomorrow..any chance for an advertising plug !!
|
Re: 68 aka "Chained in Porterbuilt Prison"
2 Attachment(s)
Well got a few things done this wkend--got firewall gutter capped-nate's round corner-fan hole plug--Was missing the main plate for air holes so will install this week--Also finish plugging extra holes in firewall and small places on rocker weatherstrip lips this week hopefully.......
Ya'll have a good week...........jim |
Re: 68 aka "Chained in Porterbuilt Prison"
nice work
|
Re: 68 aka "Chained in Porterbuilt Prison"
2 Attachment(s)
Finished most of firewall--then shaved rocker pinch weld on driver side this evening-finish weld in am-then passenger--Sure is nice to weld on original rockers-not much blow through like on Chinese versions!!............jim
|
Re: 68 aka "Chained in Porterbuilt Prison"
Very nice! I love the pinch shaved...even if the truck isn't laying frame I just think it looks better because that pinch is the lowest point in the lower body line...
|
Re: 68 aka "Chained in Porterbuilt Prison"
Quote:
(especially since it's only an hour to totally remove) |
Re: 68 aka "Chained in Porterbuilt Prison"
3 Attachment(s)
Got a little more done in last 3 days--Just realized 2 things today while i am sanding ---Why I looked at 15 trucks before I bought this one and why I love this homegrown rotisserie !! Cab is turning out very cherry and sanding these pinch welds is a breeze with the rotation...............ya'll have a good week.........jim
|
Re: 68 aka "Chained in Porterbuilt Prison"
Looking GREAT!!!
Definitely makes it better to start with a good cab!!! |
Re: 68 aka "Chained in Porterbuilt Prison"
Looking good. Bet that rotisserie does make it alot handier :lol:
Posted via Mobile Device |
Re: 68 aka "Chained in Porterbuilt Prison"
Looking good man!
I will have to keep an eye on your build since my company has me down in Lake Charles off and on these days.... In case you need some extra hands... you know to hold beer :D |
Re: 68 aka "Chained in Porterbuilt Prison"
Subscribed
|
Re: 68 aka "Chained in Porterbuilt Prison"
Looks like a good start on a great project. I'm in.
|
Re: 68 aka "Chained in Porterbuilt Prison"
subscribed
|
Re: 68 aka "Chained in Porterbuilt Prison"
subscribed. This is gonna be a good one.
|
Re: 68 aka "Chained in Porterbuilt Prison"
How about a breakdown of the porterbuilt goodies? Step notch, crossmember, a-arms, etc?
|
All times are GMT -4. The time now is 07:38 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com