![]() |
Project Slo-Go 67
4 Attachment(s)
Hello, attached are a few pics showing some of the repairs i am starting on. After being on this site for awhile, i have been influenced to try the rust repair myself. My fabricating buddy assured me there is nothing i can mess up that he cant fix. So in an attempt to keep the pocket a little fatter me and my son will give it a go. :metal:
|
Re: Project Slo-Go 67
Slow N steady, that's tghe way most of our builds our. I didn't think I would ever get done finding new parts of the body to weld up. Good luck on the rebuild.
|
Re: Project Slo-Go 67
looks like your off to a good start..
|
Re: Project Slo-Go 67
Hey, that looks familiar to me now! :) You can also buy the pc that runs the full length on the edge so that whole side would be new instead of just the part that the floor pan replaces. Quite handy I must say!
|
Re: Project Slo-Go 67
Quote:
Quote:
|
Re: Project Slo-Go 67
Quote:
|
Re: Project Slo-Go 67
Lookin good so far... keep it up!
|
Re: Project Slo-Go 67
5 Attachment(s)
well, i have made some progress , still need to finish tack welding and grinding, hope to hang the door and test fit the rocker by the end of the week... :metal:
|
Re: Project Slo-Go 67
Your skills look just fine to me.
|
Re: Project Slo-Go 67
Quote:
I have done plenty of arc welding building deer feeders and stands for personal use, this is the 1st attempt with a mig, and i seem to be getting better the more i play around. I think i was just a little nervous at first,never actually replacing panels etc. but you have to learn somehow. Thanks again. |
Re: Project Slo-Go 67
keep up the good work...
|
Re: Project Slo-Go 67
3 Attachment(s)
been slo-going, will start up on the build again this week. I did score a nice 72 rolling chasis with cab for our disk brake swap /5 lug swap, the cab in in good shape need a cab corner, still has a column , seat,head liner, door panels, AC Cab etc. not bad for 100 beaners.
|
Re: Project Slo-Go 67
Well, i completed the passenger side rust repair, stripped the door and front fender and have them both in self etching primer, now on the the drivers side rust repair. I will have to take pictures again as the ones i took were deleted when other pics were taken.
|
Re: Project Slo-Go 67
It looks like your doing a fine job!! And also looks like you got a great deal on the parts truck...
|
Re: Project Slo-Go 67
Thanks for the comment. I am working on the drivers side rust repair now. Will try to remember to upload pics tonight.
|
Re: Project Slo-Go 67
Quote:
Thanks, Rick |
Re: Project Slo-Go 67
5 Attachment(s)
Rick,
My plans after the rust repair will be to weld up all the hole in the cab floor.(po installed some buckets) shave firewall, shave gas filler. switch c-member out of 71 for front disk brakes and 5 lug rear. get the body to bare metal, get it straight as i can, prime it, and have my buddy paint it. It will probably be satin.. The 67 is my 15 y.o. sons truck so dont want to get it too fancy for highschool. I will attach a couple of pics of the truck when we bought it. I cannot complain , my son talked the PO down to $1100.00 for it about a year ago. 350/350 running drivable . |
Re: Project Slo-Go 67
That's a Nice Truck for that amount, I love to see the Younger Generation Willing to Carry on the Torch with these old Truck's..........
Thanks, Rick |
Re: Project Slo-Go 67
3 Attachment(s)
Making some progress on the drivers side :metal:
|
Re: Project Slo-Go 67
making some progress. I need to weld the underside of the floor patch. I have the footwell, and B-pillar repair complete. I have the A-pillar repair tacked into place hopefully i can finish tonight. We found a SWB Fleet for my sons truck as well... Maybe i can get some work out of him now
|
Re: Project Slo-Go 67
2 Attachment(s)
I have finished up the drivers side and have the rocker screwed into place for now for final fitment of the door / front fender. I have welded up the trim holes and lights on the fleetside bed my son bought. getting there... slowly but surely......
|
Re: Project Slo-Go 67
lookin good, keep up the work and pics
|
Re: Project Slo-Go 67
Looks like our trucks had the same original color, keep up the good work.
|
Re: Project Slo-Go 67
Looking good! Keep plugging away:D
|
Re: Project Slo-Go 67
Thanks for the kudos guys. I will keep at it. our compressor died after 20 years so it's hard to keep my son interested in working as he would rather sand the body with the DA than wirewheel the frame etc. I will find something for him todo to keep him motivated. He thinks the progress is taking too long... I remember when i was 15.... :uhmk:
|
Re: Project Slo-Go 67
5 Attachment(s)
The drivers side is finished as i mentioned I am attaching some pictures. I am also attaching pics of the PO'S body work. so of the bondo was 1/4' thick.
|
Re: Project Slo-Go 67
2 Attachment(s)
more:
|
Re: Project Slo-Go 67
Looking Good, Some People think Bondo is a Cure All for Just about Any thing.............
Keep up the Pace , You Are Coming along Quite Nice with the Truck....... Rick |
Re: Project Slo-Go 67
Thanks Rick.. Trying to keep a steady pace to keep my 15 y.o. from getting bored.
|
Re: Project Slo-Go 67
3 Attachment(s)
I have started filling in the Heater box holes on the firewall. Making progress slowly but surely.
|
Re: Project Slo-Go 67
Looking good!
|
Re: Project Slo-Go 67
Subscribed--keep the pics coming.
|
Re: Project Slo-Go 67
1 Attachment(s)
very little progress too report, but it's progress. Filled the blower motor hole, and made a piece to round off the firewall to match the drivers side. Now i need to get some metal and fill the wire channel.
|
Re: Project Slo-Go 67
Looking good.
|
Re: Project Slo-Go 67
keep up the good work
|
Re: Project Slo-Go 67
nice project... I assume that your son is helping you out?
Are you adding aftermarket A/C is that the reason for the firewall work? |
Re: Project Slo-Go 67
Quote:
Quote:
|
Re: Project Slo-Go 67
Quote:
|
Re: Project Slo-Go 67
Nice welding work. Keep it up and you will be finished in no time. I like the inner rocker work. Keep us posted with updated pics, we love pics!
D |
Re: Project Slo-Go 67
Quote:
Thanks for the comments Richard. I was skeptical and probably over thought everything at first, now i am over the initial fear and probably will attempt anything once.. yeah right. Thanks again. I may have to ask you about the reskin on the inner SS bed sides, as i will be fixing up the SS we have to try and recoup some $$. Hopefully i can work on it consistently and keep making forward progress. Thanks to the Forum members for making this possible by being there for the motivation, answers and support. y'all Rock :metal: |
All times are GMT -4. The time now is 02:28 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com