Lets show 4x4's~!
1 Attachment(s)
I want to see all the 4x4s on the board. Tell about what you got under her as far as lift, no lift, drive line etc. Mine is stock height with 73+ Edelbrock IAS Shocks, I now have 265X16 Wild Country Mudders on it. I hope to take some new pix this weekend with all the Cool fall colors to post early next week. In the meantime lets see what you guys are running~! Thanks Ski*
|
1 Attachment(s)
You mean beauties like this?
|
1 Attachment(s)
Here is my 72 K/5 blazer. it has a 4" BDS lift with 33x12.5x15 cooper all terrrains.it has a 300 horse 350 with a 350 turbo tranny behind it with 205 transfer case.im not sure on the rear diff ratio but im guessing 3:73's or even 4:10's.and let me tell you guys do not go with BDS (big dicks suspension)i think it is a really rough ride and is not worth the money i paid for it.people have told me they have seen my front tires come off the ground from hitting a little dip in the road doing 30mph.IT IS ROUGH.
|
1 Attachment(s)
heres mine, when it was a circus wagon :D ive got a newer pic that shows it all black, but MHC is looking for it on her comp (deleted it off mine) and she hasnt found it yet. (thanks btw MHC :D)
:gmc: hey it may be a chevy but i never said i liked the grill in this pic, it doesnt have any lift.. but it does have 35 concrete blocks loaded about 1 inch from the tailgate. the tires are 265/75/LT16 Mud King XT Steel Radials |
MY 72!!
1 Attachment(s)
I "built" this truck from the frame up about 5 yrs ago. It originally came from Arkansas. It had factory AC , but not much else. I added a few options to it . It now has an original tilt column, factory tach , speedminder , a cruise control ( to be hooked up) off of an early 70s Chevy car, cold AC, and dual batteries.
I rebuilt the stock 350 , punched it .030 ,added an Edelbrock Performer intake and carb. It drives thru a re-built 350TH /205 ,into a set of 3:08 posi's. ( I have a set of 3:73 posi"s on the shelf she may get someday ,along with a 700 o.d. ) . Im running stock rally wheels with Goodyear ATs. The truck is driven daily ,except when theres salt in the winter:(. It is usually hooked up to a trailer at least 2 or 3 times a week. When I first had it done, I had a guy that wanted to trade a 4 yr old truck even up for it... I told him that wouldnt be fair to him! :p |
1 Attachment(s)
here's the rustiest 4x4 on the board, it's a 72 K-10 short step, that used to be a LWB. It's all bone stock except for the tires and wheels, which are General grabber ap's 31x10.5, and 15" ralleys from an 87 Chevy.
|
mine
1 Attachment(s)
mine
|
front
1 Attachment(s)
front
|
1 Attachment(s)
My sig has most of the specs. I need (want) a 2 1/2" lift.
|
1 Attachment(s)
This is my brother's truck.....unsure of the lift, tires, etc. Since this pic was taken, he has put Weld Typhoon's wheels and Mickey Thompson tires on it.
Just thought he would get a kick out of seeing his truck on here. He isnt a member here, but does check the boards regularly. |
1 Attachment(s)
2" lift with 32" BFG-ATs on Stock Rally Wheels. Running a mild 350 with a 4 speed.
|
1 Attachment(s)
Hey. Heres my bomb. Stock every thing except the wheels and tires. 350/350/205 with 308's. PS, PB. Runs good. Looks bad.
|
1 Attachment(s)
*deep breath* awwwwe, something besides lowriders... nice;) :flag:
(I'll FINALLY have some new pics to show off sometime next week... keep an eye out:D ) |
33x12.5(shoulda got 35s) sm465, np205, spicer 60, dana 44, 350 performer intake mild cam, headers, 1406 edelbrock, body work being done this summer, arizona bed being put on, cowl hood and if theres any money left hugger orange paint and a new grille, plan on buckets and more lift. anyone here ever warp a driveshaft? mine is mildly warped im guessing its cuz of the lift causing the different angle its at.
|
1 Attachment(s)
pic before primer
|
1 Attachment(s)
Here is my 71, 4" lift, 35" Goodyears.
|
1 Attachment(s)
:o
|
why not
:)
|
1 Attachment(s)
My 68,69,70, Chevy/GMC
4" springs/2"body. 350/350/205. 36"Swampers. 500 caddy and 14bolt waiting to go in. Need a 60 for the front. |
Here's a pic of my 69 K20.
http://www.j0ker.org/~yukon/69chevy/wood03.jpg It has 35x12.50x16 Super Swamper SSR's on 16x8 steel rims. Nice and cheap rims! I put a 4" lift consisting of 4" front springs and a 4" shackle flip from Offroad Design along with 4 Tuff Country SX8000's, a Rancho steering stabilizer, and adjustable drag link. I ended up having to lengthen and add a CV joint on the front driveshaft. The rear driveshaft required no modifications. Later I added some additional leafs on the rear springs gaining an additional 3 1/2" of rear lift (7 1/2" total rear lift) At about the same time I added a heavy duty spring leaf to the front spring packs and a centerbolted tapered block up front. Front lift should be about 6". I am told the centerbolted block up front is safe, but it will be gone at some time in the future. In the next few days I am adding a 2" body lift to give room for a 454 that is being installed within a month. The pucks were made by a friend from aluminum. When the 454 goes in, I am also swapping in a 4 speed manual in place of the three speed. The present engine is a monsterous 307 that puts out an incredible amount of power. Why I'm replacing it with a puny 454, I don't know :) The rear axle is a Corp/Eaton with a factory Detroit Locker. The locker is great! The front axle is a closed knuckle Dana 44. It's gotta go someday. My truck came factory equiped with a manual throttle and very little in other options. |
1 Attachment(s)
Here's another from Missouri. My old 71, 4" lift and 33's.:bowtie:
|
1 Attachment(s)
OK, Here's the Beast. It ain't pretty, still lots to do compared to most of the others I've seen on this board (like Pont and Mudder, I love your trucks!). It's got a 4" lift with dual Rugged Trail NitroCell shocks front and rear, and another pair of NitroCells in the rear acting as traction bars. Dana 44 front/Dana 60 rear w/4.10 gears. Front and rear sway bars. ProComp dual steering stabilizers. Tires are BFG M/T 35x12.5R16.5 on old style American slotted aluminum wheels. This is the way it was set up when I got it. Rides like a tank.
|
1 Attachment(s)
my dads 71 waiting to get started
|
1 Attachment(s)
...this is 6772king's "bigshow"...8" suspension,2" traction,3" body on 42's
|
mooneyes...
Got any better pics of that beast? Looks like fun to me.:bowtie:
|
1 Attachment(s)
here's another oh yea its a 396 4 gear
|
1 Attachment(s)
and another
|
1 Attachment(s)
and 1 more of the giant ladder bars
|
Thanks
Wow, i like that a lot! Something about 42 inch tires that always wins me over:rolleyes: What state is that in and is it street legal because of the lowered extension on the front bumper? I think the law 'round here is 30" to the bottom... I'm gonna pull the same trick as that guy. Nice truck:flag:
|
1 Attachment(s)
I just got this one from Joe [JoesJunk], it;s a 68 on a 71 chassis with 350-350, np-205, power steering and power disc brakes, tilt wheel, mostly original paint, original wood bed and stock suspension.
I have a 4'' lift and a new set of 35"s but cant decide whether to use them on this truck, drove it home last night [ about 60 miles ] and it ran great. Thanks Joe |
Blazerman, if you ever get sick of staring at those 35's, i know where there's a good home for 'em ;) ;) :D
|
cant pass up a chance to show my pride and joy lol:D
6 inch lift with 35's http://www.alaska.net/~placer1/69winter1.jpg |
1 Attachment(s)
ha i found a pic pf my dads truck b4 we tore it apart, this was taken back in the mid 80s right after he did a mild resto on it
|
What is a traction lift, ie; 2" traction ?
|
well
a traction lift is like a 1 half of a leaf spring that when installed under your springs give you 2 inches of lift. the rear of the traction lift is attached to the leaf springs.
|
1 Attachment(s)
Here is one of mine, (the other is used for plowing snow). It is a
71 with a 400sbc, TH350 connected to an NP 205 transfer case. Tires are 31.5, no lift. It has tinted glass, rear slider, black interior, tilt steering, tach, and an AM/FM radio. It is fun to drive and you can surprise folks at the lights, (not that I ever do that). Jim |
1 Attachment(s)
here's one more
71 2500 custom, 400, at, ps, pdb, 60/44, 205, 16.5x12.5x35's, 6" lift :gmc: |
Enjoying the pics. Keep them coming!
|
1 Attachment(s)
here is mt 69 I'm building.
|
Just to keep the thread alive..........
1 Attachment(s)
Here's one before the lift, wheels & tires and power windows with one piece side glass. Taken at a cabin where I go trout fishing every year.
|
All times are GMT -4. The time now is 11:14 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com