![]() |
1969 SuperBurb build-up (Bagged and Blown!)
6 Attachment(s)
*** 6/20/18 Hanging the body trim.....***
*** 4/24/18 Will this thing ever be done???*** *** 3/15/17 All front sheet metal bolted on for the last time.*** *** 10/23/16 FINALLY FIRED IT OFF!!! :metal:*** *** 10/5/16 On the home stretch!!! Finishing up some small details before trying to fire it up....:metal:*** *** 11/5/10 Still working on the wiring: fuel injection, body harness, electric fans, a/c and Magnacharger install.... *** *** 8/6/10 Currently working on the wiring: fuel injection, body harness, electric fans and air ride.... *** *** 4/2/10 AccuAir is installed!!! Time to start working on the SuperCharger, :metal:*** *** 1/1/10 Painting is complete!!! Time to reassemble, :metal:*** Paint code: red - WA9260; white - WA8624 I put this here because most of the modifications/upgrades apply to trucks as well. The first picture is of the truck when I bought it. It was an original California black plate truck. It had minimal rust, most do to a leaky windshield and the exhaust exiting out the sides. The next picture is a rendering of what I envision it looking like when I'm done (rendering by Zumo graphics). List of work completed: Front suspension: ART bags, ART StrongArms, CPP 13" drilled and slotted rotors with dual piston calipers and modular 2" dropped spindle. 1.25" sway bar. http://67-72chevytrucks.com/vboard/s...d.php?t=174330 Rear: ART bags, Porterbuilt 3" dropped tubular trailing arms, CPP C-Notch, ECE Super track bar, ECE upper shock relocation kit, 5 lug conversion axles, hidden hitch, and flip down tag. CPP 12" rear disc brake conversion with drilled and slotted rotors. http://67-72chevytrucks.com/vboard/s...d.php?t=162718 http://67-72chevytrucks.com/vboard/s...d.php?t=162641 Build sheet: Billet Specialties Vintec wheels/Toyo ProxyII tires, rear: 20 x 10 (5" BS) 295/45, front: 20 x 8.5 (5.0" BS) 245/45s Accuair E-level air management setup (3/8" lines, 3 gal tank, Viar compressor, remote control) ART StrongArms ART Bags CPP 2" modular dropped spindles CPP 5 lug conversion kit with 13" drilled/slotted rotors and dual piston calipers PorterBuilt tubular trailing arms with built in 3" drop ECE Super track bar ECE Shock Relocation Kit ECE 5 lug axles ECE hidden hitch and flip down tag PST sway bar & ECE lowered sway bar brackets Misc parts from board members (drag link, brake pedal....) CPP C-Notch New 3.73 Yukon Gears and bearings New Eaton posi unit Energy Suspension polyurethane body mount kit Body work: Replaced/repaired inner and outer rockers, lower inner kickpanel, partial floorborard, and doglegs on both sides (Goodmark parts from Ed at MotherTruckers) Welded holes in firewall including heater box Welded in new rear lower quarters Removed stock upper suburban trim and filled holes Welded in 5 1/2" remote gas filler lid from 80's Nissan Sentra car New sheetmetal - Doors, fenders, inner fenders, core support, cowl induction hood, 72 GM inner and outer grill, 72 bumpers Custom made Mar-K.com upper and lower trim Custom Billet Aluminum Emblems Chrome plated/stainless steel factory roof rack OEM truck cargo light converted to LED 3rd brake light All new glass, glass rubber, vent windows (RogerKoop), door seals (PrecisionReplacementParts) Converted manual liftgate extensions to gas struts http://67-72chevytrucks.com/vboard/s...d.php?t=220511 Removed tailgate scissors and replaced with cables. Welded in truck bed ends for truck tail lights. Bottom of body has been sprayed with SpeedyLiner undercoating Engine: 5.3/4L60E w/ DBW(only 10 miles, 2006 Tahoe) MP112 Magnacharger with 43LB marine injectors (BIGTEX) Speartech EFI harness Clayton Machine Works billet coil covers Painless body harness Entropy LSX radiator and dual cooling fan setup Doug Thorley Tri-Y 323 headers (JAMIE) http://www.truckinweb.com/tech/engin.../photo_01.html 2007 Cadillac CTsV oil pan and components ECE LS conversion motor & tranny mounts ECE 28 gallon Stainless Steel EFI fuel tank (Ricks Tanks) http://www.earlyclassic.com/catalog.aspx Custom fuel line setup using Corvette fuel/pressure regulator and Walbro in tank fuel pump (Thanks Shifty, BowTieOgre and PCMCobra!) Interior Dakota Digital HDX blue tooth programmable gauges (MCBMatt) Custom Front row Buddy Buckets with heated seats cup holders, 2nd row Buddy buckets, 3rd row bench. Tilt Steering column Custom woodgrain steering wheel Cruise Control 72 Cheyenne Super Front and rear door panels Intermittent wipers Vintage Air Gen IV with Dakota Digital controller Custom RetroSound 2 Bluetooth radio |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
5 Attachment(s)
More pics of the tear-down... Made a nice mess on the floor also, forgot to put something in the end of the transmission, DOH!!!
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
1 Attachment(s)
OK, the hard part is done (not!). While the engine is out of the way, I plan on smoothing the firewall, redoing the front brake lines, redoing the front airlines, clean and paint. Then on to the fun stuff......
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
lookin great man....keep up the good work
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Gotta love that. Good thing mine's a daily driver or it would be in pieces too! Keep the progress pics rollin!!!
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
I have been wanting to see your burb for a while (since the PS thread) and didn't know where to look. It looks sweet! NICE WORK! I love those burbs!!!
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Looks good, hope my new one will look half as good one day.
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Are you going to use the stock exhaust manifolds or headers? I have been trying to get my stock manifolds to work but both sides are hitting the frame. I have heard that big block headers will work if you use LS1 flanges on them. I will be trying that soon.
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
I wanted to use the stock ones, however if you're having problems, I may have to try something else. I think I remember Shifty of GenIII say something about the camaro/corvette stock manifolds would work. I'll try to do some research on that one. Rob |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
You can drop it off at my house when your done :)
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Sweeeeeeeeeeeeeeeeeeeeet :c2:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
can i drive down there in the fall so we can bag my truck next?! ;)
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
What are you using for motor mounts?
I ran into this problem on my 73 pickup when I was using ECE's motor mounts on my 6.0L/4L80E documented here: http://67-72chevytrucks.com/vboard/s...d.php?t=193657 This is with ECE mounts on my '73 frame: http://www.73-87chevytrucks.com/proj...ifold_hits.jpg I am selling those now... This past weekend I replaced the ECE mounts (which posistions the SBC about 3" forward of a normal SBC) and put S&P motor plates on it (which mounts it back in the same position that a SBC would mount. I expected grinding on the port above to clearance it and was told 00-02 F-body manifolds would work, but I believe I have it to where I can use the factory Truck manifolds. I |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Looks great, keep it up!
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Keep Building! Looks good! I have a very similar swap I'm working on, a 2003 Avalanche 4wd running chassis with a 71 burb on top. yikes! good luck
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
Thats the same problem I am having and I am using the S&P plates also. Summit has big block headers for $99 and the flanges are $16 I am going to try that route and maybe I can help us all. Sorry to hijack your thread. |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
5 Attachment(s)
Shifty - come on down!!!
I'm using the ECE motor mounts. I was hoping to be able to use the stock manifolds, but looks like that might not work. A buddy of mine has an 02 LS1, I'll borrow his and see how it works. Oh, well not quite there yet. Spent half the day cleaning (still not done) and started working on fill the holes in the firewall. I also have some rust repair to do, but pretty minimal. After that I will be moving to the rockers and and a small amount of rust on the floors/kickpanels. Here are some more pics, the old burb is definitely at parade rest now. |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
5 Attachment(s)
I also gutted all the engine & dash wiring. I enjoyed this quite a bit, since PO had cut and spliced into every wire on the truck. I found many melted or burnt wires as I was doing this. Also, cut the firewall to accept a new painless wiring harness.
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Chris (CaptKaos),
Just read your build post, nice job BTW. I know ECE designed their motor mount kit for the 67-72. Could this be the problem with the exhaust in your truck? I don't know what the differences are in the frames. Also, do you have some pics and descriptions of your fuel system. What tank, fuel pump, type of lines.....???? |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
4 Attachment(s)
:bling: pictures and links to the gauge build by Putter and the one in FAQ by Ron Woodgeard.
http://67-72chevytrucks.com/vboard/s...d.php?t=200387 http://67-72chevytrucks.com/vboard/s...d.php?t=110613 |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Man you are getting that thing going. I'll be plugging those same firewall holes here very soon. It is really looking nice. :metal:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Looking Great! Keep up the Sweet Progress
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
looking good
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Lookin great. And perfect timing for me I just started on my sub yesterday and you have already saved me some grief. Thank-you and keep the pics comin....PLEAZE....
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Holy crap...that gauge cluster is AWESOME. Where did you ever find something like that???? (**wink**)
Hey, if you are running 2700 rpm and have 0 oil pressure, you better shut'er down (see gauges) Rob, glad to see you got all the parts home safe & sound. We had a great time at the cook out and really enjoyed meeting you and your family. Oh, I just remembered you wanted the door hinges. You still need them? Shoot me a PM with address if you do...it's pretty dry out there for a change!! Maybe after we get this house done I will come over and you can help me do MY bags! |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
Yeah, the gauges look great! I know some dude up in Jackson, that does pretty "decent" work:lol: . Thanks, again we enjoyed meeting everyone too. Come on down and we'll hammer your truck in no time. While I'm doing the bags, you can wire the gauges up:c2: . Any progress on the tailgate? |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
My compliments on the guage cluster(and everything).All the right stuff in the right place and looking good while doing it.Thumbs up!
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
KUDOS again to Putter (with an assist to DJRacer!). |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
I'm really curious to know how it turns out for you. Very strange about people having problems w/ECE mounts - they worked like butter for me :confused: |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
Quote:
I don't know what they are doing with the position of the mount as I know you 67-72 guys would have to drill new holes to get the 73-87 brackets on there, but if they mount like mine do, it will be way forward from the normal SBC position. I already knew I would have some grinding to do to miss the EGR port, but with the ECE mounts it was hitting the frame mount that they are selling you. With using the S&P mount I still had to clearance the EGR port, but with the ECE mounts I would have to cut it completely off, or cut a hole in the frame mount. I have been wanting to see Shifty's pics for comparison, just haven't had the time... As far as the front section of the frame, the 73-87 is the same as the 67-72. Which is why you can put a 73-87 under a 67-72 to upgrade one to newer parts. Fuel system I am using a 1987-91 EFI Blazer/Jimmy fuel tank, stock sending unit and a AC241 in tank pump. Out of the sending unit is 3 lines: supply, return, Evap. I am tying the same 3 lines from the LS motor into those lines using hardline down the frame and braided line at the front to the motor and at the rear to the tank. At the end of the hardline on the supply line is the standard AC fuel filter. I won't take up a ton more room than I already have hi-jacking your thread, but on Post #14 there are 2 shots of the front/rear of my fuel lines running down the passenger side of the framerail. When we pull the body back off after aligning the body panels up better I will post more pics to that thread. I may have some more at home also. |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
http://www.ls1tech.com/forums/attach...chmentid=57781 Hart_Rod, Get these and you will be fine... (sent Shifty a PM on what they are off of) I am guessing a '98 F-body... |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
Are these from a car or truck???? Where can I get them? Rob |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
There was someone here in Detroit with an identical rig running a sweet old 409 setup with A/C to boot. Same color . I think he was/is a GM service mechanic somewhere based on the stickers on the Burb.
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
BUT... We have started the house. We have concrete and some garage walls already! (So there went my free time for the next SEVERAL months) |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Those are off of a 98 Camaro. I got them off ls1tech (before I stopped posting over there) for $40 shipped.
For a picture of all manifolds available for your application, please see this website which covers a 6.0L engine being put in a vehicle. It shows all manifolds that are stock for every year a ways down: http://www.4wheeloffroad.com/brandpa...ng/index1.html This link might go dead in the next 4-6 weeks, so ... if you're really interested in the info on there, you better right-click those pictures and "save as" with a descriptive title for your reference!! |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
1 Attachment(s)
Actually, for the sake of future usage, I am posting that portion here. Here is a caption and a picture which explains manifolds:
Quote:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
PS - another note, just because I can. The second one from the top is actually from a 99-00 F-body. Notice there is a hole for EGR provisions in the passenger side manifold. The '01-'02 had this deleted.
For flow, the top flow the worst but fit the best. The second from the top flow better and have heat shields on both sides, which is a plus, and flow better, but the flange on the passenger side contacted my ECE motor mounts. I wanted to try the truck manifolds, but ... couldn't find any easily. Maybe when I get up and running and actually put an exhaust system on the truck, I'll look into other options. I would really like to find some genuine headers to use... |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Shifty, you wouldn't happen to have an extra set of the top ones would ya? I'll be up there July 4th, might be able to help you a little on your bags.:lol:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
If you want, I can bring mine up when I come up there 4th of July weekend. Rob |
All times are GMT -4. The time now is 08:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com