![]() |
SANFORD build thread
3 Attachment(s)
here is my current project,wife and son gave it the nickname,I will try to get caught up on pics.this is when I bought it.I had no intentions of doing any thing with it but use it for parts.I thought at some point I would have done another stepside but when I started looking on this site I saw the gasser influenced truck that Hardwaa built and it really messed me up,I love the look of that truck.Mine will be similar.Thanks for looking and I will try to keep things updated as I go. Attachment 916174
Attachment 916175 Attachment 916176 |
Re: SANFORD build thread
What a beautifully clean straight truck. Looking forward to the progress updates!
|
Re: SANFORD build thread
3 Attachment(s)
I decided to use this bed as the original had rust along the factory seam.I cut this one down to make a short bed.I know there is a little difference on the wheel opening but I will address that later once I can see it on the ground.Attachment 916205
Attachment 916206 Attachment 916207 |
Re: SANFORD build thread
Quote:
|
Re: SANFORD build thread
5 Attachment(s)
these pics basically show getting everything set up suspension wise,I moved the trailing arm crossmember back about 1 3/8 inches,got 2 inch blocks installed and getting ready to start c-notch.Attachment 916226
Attachment 916227 Attachment 916228 Attachment 916229 Attachment 916230 |
Re: SANFORD build thread
4 Attachment(s)
this is the the rearend setup.got the notches finished,I cut 6 1/2 inches out of the rearend to get the tire clearance I wanted.I still have to mount the lower air bag mounts once I figure out what pinion angle I need.Attachment 916245
Attachment 916246 Attachment 916247 Attachment 916248 |
Re: SANFORD build thread
3 Attachment(s)
this brings me to the current status,I am currently working on the front suspension and will post pics soon.Thanks for looking.Attachment 916254
Attachment 916255 Attachment 916256 |
Re: SANFORD build thread
nice work !! love the rear stance!
|
Re: SANFORD build thread
Wow! That is very cool. Nice work on the frame and the bed.
|
Re: SANFORD build thread
I agree, very nice work :thumbs:
So it looks like you retained the stock housing ends when you narrowed the differential housing? Did you have shorter C-clip axles made? |
Re: SANFORD build thread
Thanks guys for the replies,I did re-use the stock housing ends.I cut and re-welded my stock axles to use during mock-up of all my parts.Once I have everything finalized I will order a set of c-clip axles from Moser.Thanks.
|
Re: SANFORD build thread
Quote:
Thanks, John |
Re: SANFORD build thread
hemifalcon, The wheels were on an old frame when I got it,I think they are a standard chevy 5 lug wheel. They measure 15x8 with a 3.750 backspace. The caps I got at a swap meet, I think they are for a first Gen camaro or Nova of that year. I have a set of American Racing TTO's ordered but they have not gotten here yet.
|
Re: SANFORD build thread
5 Attachment(s)
small update,i raised the crosmember 1 1/2 inches and moved it foward 1 1/4 inches,got the rack and pinion mounted,working on getting the a-arms ready for air bags.Also had to check out the wheels I got from markeb01.Attachment 918278
Attachment 918279 Attachment 918280 Attachment 918281 Attachment 918282 |
Re: SANFORD build thread
thats just slick!!
|
Re: SANFORD build thread
sweet build !!!
|
Re: SANFORD build thread
3 Attachment(s)
Small update guys,getting the air bags mounted.I moved my LCA arms forward .750 to gain caster and found out that I had to move the airbags foward to keep the bags centered in the LCA.This was an unexpected surprise.I had to modify the upper bag plates.Attachment 919427
Attachment 919428 Attachment 919429 |
Re: SANFORD build thread
5 Attachment(s)
Here is a few pics of the a-arm modification,I still have the other one to do,also show the plates I used to build the cup for the bags.Attachment 919430
Attachment 919431 Attachment 919432 Attachment 919433 Attachment 919434 |
Re: SANFORD build thread
2 Attachment(s)
I don't have a lot of pics of every thing cleaned and painted so I thought I would post something a little easier on the eyes,I got the new gen 4 vintage air surefit A/C kit,got it from Way2Lo2(Boris).I would definitely recomend him if you need something.Also finally got rear American Racing TTO wheels for the rear,took about two months to get them but they are here now.well that is all I have for now and thanks for looking.Attachment 919438
Attachment 919439 |
Re: SANFORD build thread
enjoy seeing your work and borris is the man great guy to deal with
|
Re: SANFORD build thread
Thanks Dino,Your trucks are crazy as well,I really like the Pro-Street truck.I must say that I am envious of some of the trucks I see from the west coast,It is hard to find a fairly rust free truck around here without spending a fortune on it.I look forward to your new builds.
|
Re: SANFORD build thread
3 Attachment(s)
I thought while I was posting I would show my last project,Built it from the ground up,I sold it in 06 after building our home.I had to pay for a driveway but you have to do what you have to do.Thanks guys for looking and for all the info this site brings to other people,I have gotten a lot of help from people on here.Attachment 919447
Attachment 919448 Attachment 919449 |
Re: SANFORD build thread
:jdp::jdp: wow that is killer!! awsum truck you have great style too, any more pics? and you are wright i am lucky are trucks out here are pretty solid the dually am building know is so clean
|
Re: SANFORD build thread
yeah I definitely have my eye on that dually build,unfortunately I don't have any other pics,I had a disc with pics on it but can't find it.
|
Re: SANFORD build thread
great progress so far!!! ur old truck was sweet as hell so im sure ur new one is gonna turn out great to!!!
|
Re: SANFORD build thread
great build....subscribed...
|
Re: SANFORD build thread
Nice fab work :thumbs:
What are the specs on those rear tires and wheels? The tires look to be good sized. |
Re: SANFORD build thread
I love the look of your last truck! Your current build is looking great! Keep up the excellent work on it and thanks for giving us the updates.
|
Re: SANFORD build thread
Thanks guys,Capt. the rear tires are 285/70/15 silvertown and the wheels are 15x8.5,coulter I have been watcing your truck as well,good job.
|
Re: SANFORD build thread
bump!
|
Re: SANFORD build thread
Subscribing to this one.
Love everything,... especially the TTO wheels! |
Re: SANFORD build thread
4 Attachment(s)
Just a quick update,I got the new wheels on the rear,also fininished the front control arms and was able to air up the front bags.I set the motor and trans in,I have some clearance issues with the rack but that is not surprising.I think I will get the cab installed then I can get the motor and trans mounts made.I also finished the rear panhard bar.I still have to get R & P attached to the spindles.I think once i get the engine mounts made I will start on the headers and exhaust.Thanks for looking.Attachment 925445
Attachment 925446 Attachment 925447 Attachment 925448 |
Re: SANFORD build thread
Nailed the wheels,you do great work
|
Re: SANFORD build thread
thanks
|
Re: SANFORD build thread
Awesome work! Look forward to seeing more
Posted via Mobile Device |
Re: SANFORD build thread
You get down to business. I look forward to watching your build.
|
Re: SANFORD build thread
Looks like you need the small balancer and a small pulley.... scot douglas had to do the same thing when he used a rack .. should be some pics here somewhere...
|
Re: SANFORD build thread
Awesome looking truck that you have and had.
|
Re: SANFORD build thread
Thanks guys,awbrown I saw in that build that he used the smaller balancer but i figure since I am building headers and exhaust any way I will just raise the engine a little and fit it where it fits best.Thanks for looking.
|
Re: SANFORD build thread
Nice Job...Is your rack power or manual? I'll be watching this one!
|
All times are GMT -4. The time now is 12:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com