The new Ole Sarge Customs shop
4 Attachment(s)
The building is 70x30. Uninsulated, no power. There is a dividing wall providing a 40 ft (with a ceiling),and a 30ft unfinished side.
|
Re: The new Ole Sarge Customs shop
3 Attachment(s)
This is the inside
|
Re: The new Ole Sarge Customs shop
4 Attachment(s)
I immediately commissioned a friend to wire the shop. As a shop. 200 Amp main with 4 dedicated 220V circuits, 1 20 amp breaker for each wall, 15 amp for lights only.
|
Re: The new Ole Sarge Customs shop
2 Attachment(s)
I also had him install garage door openers on every door, and motion detector LEDs outside
|
Re: The new Ole Sarge Customs shop
3 Attachment(s)
Next we found a working 1946 Philco refrigerator, and I knew it was perfect for the shop!
|
Re: The new Ole Sarge Customs shop
5 Attachment(s)
Then a good friend of mine started petitioning tool manufacturers and telling them my story. I received several care packages. We also decided that a proper bench should be 16ft, and set about extending it. Alex got a new toolbox too.
|
Re: The new Ole Sarge Customs shop
5 Attachment(s)
Then we began the slow process of insulating and putting up plywood and painting
|
Re: The new Ole Sarge Customs shop
Great work, keep us posted.
|
Re: The new Ole Sarge Customs shop
3 Attachment(s)
we continued putting things behind the bench. A large sign, pegboard, bluetooth surround sound, 40” LCD hooked up to my laptop to display wiring schematics and such.
|
Re: The new Ole Sarge Customs shop
4 Attachment(s)
Here’s the exterior sign my boys are working on. It’ll be on a dusk till dawn sensor. The divider bar in the back has 4' of green LED on top and 4' of white on the bottom.
Oh and it’s 84” x40” |
Re: The new Ole Sarge Customs shop
Quote:
|
Re: The new Ole Sarge Customs shop
5 Attachment(s)
And now I’m having an additional 24x40 building constructed to move some of my cars and open up some bay space. It should be finished on Monday.
|
Re: The new Ole Sarge Customs shop
-
Looks good Sarge. It should make you guys a great shop with plenty of room. Glad to see you getting set back up..... LockDoc |
Re: The new Ole Sarge Customs shop
That is a great space. I know you are happy
|
Re: The new Ole Sarge Customs shop
When I say that we have "closed”, we merely went from being a business to an active hobby until such time as we can employ a full time work force.
|
Re: The new Ole Sarge Customs shop
We’re also taking bids to extend the shop another 10', making it 30x80. Moving that useless side door to the front and an 8x10 Office just left of the man door.
|
Re: The new Ole Sarge Customs shop
4 Attachment(s)
The new building is finished, waiting on the overhead doors and gravel.
|
Re: The new Ole Sarge Customs shop
1 Attachment(s)
Here’s an overall shot of the property.
|
Re: The new Ole Sarge Customs shop
A man can never have too much covered space, especially if you are into automobiles.
Looking fantastic. |
Re: The new Ole Sarge Customs shop
Right?
|
Re: The new Ole Sarge Customs shop
1 Attachment(s)
after nearly 6 years of sitting derelict, exposed to the weather. we finally got the old 8N running and transported it to the shop!
|
Re: The new Ole Sarge Customs shop
4 Attachment(s)
today we built a rack to hold our new steel (my design). not done yet, will finish this week.
|
Re: The new Ole Sarge Customs shop
4 Attachment(s)
we finally got the steel rack finished yesterday!
|
Re: The new Ole Sarge Customs shop
Man that looks great and very handy.
|
Re: The new Ole Sarge Customs shop
Yeah, way better than a pile in the corner!
|
Re: The new Ole Sarge Customs shop
Very nice shop.
Ray |
Re: The new Ole Sarge Customs shop
Thank you, we are constantly improving it
|
Re: The new Ole Sarge Customs shop
2 Attachment(s)
we finally managed to close up that hole in the ceiling for the garage door opener, so now we can put blow in insulation up there!
|
Re: The new Ole Sarge Customs shop
5 Attachment(s)
1. Creating a new 120 gal 5hp compressor
2. Cutting the platform off my current compressor 3. Hanging brooms 4. My Model A wall hanger 5. The 50 Chevy 3100 wall hanger that we are rebuilding from the fire |
Re: The new Ole Sarge Customs shop
3 Attachment(s)
Our custom made 120 gallon air tank
|
Re: The new Ole Sarge Customs shop
1 Attachment(s)
we finally finished painting that wall.
|
Re: The new Ole Sarge Customs shop
1 Attachment(s)
We finally put that 454 on an engine stand!
|
Re: The new Ole Sarge Customs shop
5 Attachment(s)
1. we started insulating that main garage door, ran out of styrofoam. Have to pick up some more
2. This was the old lighting, insufficient! 3. This is the new. 12 fixtures of 5K LEDs. Should be good now! 4. We’ve been putting off framing out the breaker box for over a year now 5. Finally got round to it! Overall a productive day! |
Re: The new Ole Sarge Customs shop
5 Attachment(s)
All winter I wanted to insulate the ceiling, now finally it’s done! R30 all the way across!
|
Re: The new Ole Sarge Customs shop
1 Attachment(s)
Our new florescent clock came in
|
Re: The new Ole Sarge Customs shop
3 Attachment(s)
Finished insulating 3 out of 4 doors and finished insulation and plywood on the entire North wall today.
|
Re: The new Ole Sarge Customs shop
1 Attachment(s)
We painted that corner today, so now the whole North wall is finished!
|
Re: The new Ole Sarge Customs shop
4 Attachment(s)
Power ran to the dusk till dawn sensor for the sign
|
Re: The new Ole Sarge Customs shop
3 Attachment(s)
New exterior sign lights up with green LED "Ole Sarge” and white "customs”
This is how far we got on the west wall today |
Re: The new Ole Sarge Customs shop
2 Attachment(s)
We got the west wall done
|
All times are GMT -4. The time now is 05:17 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com