![]() |
Loadmaster '47 COE
Hi to all, new to the forum and figured I'd start a build thread on my '47. It's a 1 1/2 ton COE (cab over engine). I picked this thing up in 2012 while on vacation in southern Colorado visiting my son. I had no extension on buying a new project, but after seeing it still sitting in the same place I saw it 2 years earlier I figured why not check it out. Well, as it turned out the guy who owned it had passed away 3 months prior and his widow and son in-law where happy enough to sell it. We started at $2400 for the whole truck but after checking on shipping ($2000+) I decided all I really wanted was the sheet metal. I explained this to them and offered $1000. They said "here's the title" and the next morning my son and I showed up at 7:00 with a U-Haul van and some new tools to get to work. 10 hours later, sun burned and worn out. It was loaded in the van. Mind you, we did this with hand tools and no lift. We actually slid the cab from the truck frame into the U-Haul on 2 old pieces of tubing we found laying around the yard.
http://i562.photobucket.com/albums/s.../Photo0128.jpg http://i562.photobucket.com/albums/s.../Photo0132.jpg http://i562.photobucket.com/albums/s.../Photo0134.jpg http://i562.photobucket.com/albums/s...hoto0135-1.jpg http://i562.photobucket.com/albums/s.../Photo0140.jpg 47 Fasttoys |
Re: Loadmaster '47 COE
OK, so after a 16 hour solo drive back to South Carolina I had 1 day to unload it check it out a little, return the U-Haul and hop on a plane back to the small (9 million plus people) industrial city of Shenyang, China. I rearranged the shop enough to get it off the ground and stuff it in the corner awaiting my next vacation. Below are a couple of shots of what I'm starting with: a almost rust free, almost dent free, unmolested and complete "47 COE.
http://i562.photobucket.com/albums/s...E/DSCI0265.jpg http://i562.photobucket.com/albums/s...E/DSCI0266.jpg http://i562.photobucket.com/albums/s...E/DSCI0267.jpg http://i562.photobucket.com/albums/s...E/DSCI0268.jpg http://i562.photobucket.com/albums/s...E/DSCI0264.jpg 47 Fasttoys |
Re: Loadmaster '47 COE
Fast forward to April on this year. I got back to the states to find a few boxes of parts I had ordered awaiting in the shop. My brother-in looks after things for me while I'm away so no house maintenance issues to deal with and all the other cars where in good running order.
http://i562.photobucket.com/albums/s...E/DSCI0259.jpg First order of business was to build a cart for the cab make some working space. For this I needed to get some steel to the shop, what better a way to do this then put the other truck into service. http://i562.photobucket.com/albums/s...E/DSCI0271.jpg I build the cart at the final ride height and angle. This was determined the red-neck way...will it fit into the shop? http://i562.photobucket.com/albums/s...E/DSCI0280.jpg http://i562.photobucket.com/albums/s...E/DSCI0309.jpg |
Re: Loadmaster '47 COE
Great looking project. What are your plans for a frame/engine? How often will you get to work on it (are you still in China)?
|
Re: Loadmaster '47 COE
47 Fasttoys, now that looks like a great project. You got a great deal on it and a plus is how good of shape it is in. I like your other shop truck too. I can not wait to see this come under way.
Shannon |
Re: Loadmaster '47 COE
Plans are a late model GM 1/2 ton (2000-2006) mid mounted LS/auto, pick style bed, front of engine under the seat with intake flipped backwards. Single rear wheels. Airbags only if needed to get it in the shop. Finished interior but nothing special on the exterior. This will be a daily driver and tow vehicle for other toys. Function over fashion. As far location, nope I'm still in China, I've got 1 more year left and then it's busy, busy on the truck. I get 1 or 2 trips home each year I'll be updating this thread with what I completed in April. April's trip was truck only and I think i got a lot done for 19 days, you be the judge.
47 Fasttoys |
Re: Loadmaster '47 COE
Well Shannon, I just took a peek at page 1 of your build thread and I can see where I'll be spending a few hours very soon. A burb/panel is on the short list for future builds (don't tell the wife) hehe
Rob / 47 Fasttoys |
Re: Loadmaster '47 COE
This should be a real neat project.
I've always thought a COE would be a cool truck to have. Kim |
Re: Loadmaster '47 COE
Looking forward to watching this one. I have a 54 COE I plan to start on next. I cant wait
|
Re: Loadmaster '47 COE
Su-weeeet!!
|
Re: Loadmaster '47 COE
OK so I started stripping to the cab . Put my granddaughter to work (no child labor laws at my house), I can't remember ever being at a height where I could stand in the cab of a pick-up. At 5 years old she can't wait to be in the shop to help out. I hope it lasts forever. After removing all the trim pieces I realized I had zero screws strip oR rusted to bad to remove. In working on old junk for 30 years this is the first time that has happened. WOW this is a very good sign.
http://i562.photobucket.com/albums/s...E/DSCI0286.jpg Stripped the firewall of parts and cut out the hump as I want a flat floor and don't need the recess. I welded in a connecting brace to keep the firewall in place while welding. http://i562.photobucket.com/albums/s...E/DSCI0295.jpg http://i562.photobucket.com/albums/s...DSCI0301-1.jpg Welded in a piece if 16 gauge sheet metal to fill the cut out. http://i562.photobucket.com/albums/s...E/DSCI0303.jpg Rob |
Re: Loadmaster '47 COE
Awesome work so far! I'd love to get a hold of that old B900 KW that was sitting in that yard! We just struck a deal on a 54 GMC AND COE. I'm definitely intrigued by these. If you don't mind, I'll post some pics of a couple I saw at the all truck mats last weekend.
|
Re: Loadmaster '47 COE
By all means post away, worked on filling the remaining holes in the firewall and the frame work for kick panel and floor, installed floor plate. I will be going back and finishing the firewall later after remaining mods are complete. You can see the COE has other access doors under the seat. These where for air filter service and rear shifter hook up service. The battery was under another door the same as the pick-up but was removed as part of the main removable floor sections (3). The area under the floor may end up being the location for the gas tank, not sure. By the time you stick a radiator and electric in the front end there's not a whole lot of room in the engine bay.
http://i562.photobucket.com/albums/s...E/DSCI0307.jpg http://i562.photobucket.com/albums/s...E/DSCI0317.jpg http://i562.photobucket.com/albums/s...E/DSCI0320.jpg http://i562.photobucket.com/albums/s...DSCI0325-1.jpg http://i562.photobucket.com/albums/s...E/DSCI0332.jpg |
Re: Loadmaster '47 COE
Well if you remember earlier I stated almost no rust. Well here it is in all its glory.This is after the patch, the front part didn't need any steel added but the rear part was a little thin so I had to add a small piece. The cab corners are all solid just full of dirt, it came out fine but what a mess. The 2X2 tubing you can see in the second photo is part of the body cart but will probably end up as part of the main body support structure, above it out of view is short sections of 2X2 with nuts welded on which the cab is bolted to. The vertical reinforcing beams (not sure what their called) rest on the lower 2X2. Originally the rear of the cab mounted on a center support, my engine will be in the way of this so I will need to come up with something similar to what the later models use.
http://i562.photobucket.com/albums/s...E/DSCI0356.jpg http://i562.photobucket.com/albums/s...E/DSCI0357.jpg |
Re: Loadmaster '47 COE
Lookin' good! I"m a big fan of hot rod cab-overs. Good luck the rest of the way.
|
Re: Loadmaster '47 COE
Looking good.
Kim |
Re: Loadmaster '47 COE
Love them COE;s alway thought what a cool look they have.
Guys who build them as a pickup make the look great. |
Re: Loadmaster '47 COE
Thanks for the comments guys, I got to thinking why I wanted to build a COE....lets face it it's an odd looking bird. kind of like an afterthought GM had. The thinking may have went something like this: # 1 designer : Hey lets make a heavy duty truck shorter but still have the load rating of a normal size. # 2 OK , sounds good, but we need to use a much of the standard parts as possible. # 3 Great, now all we need to do is jack up the cab about a foot, stuff the engine under it, shove the hood back a couple of feet and BINGO. What they failed to mention was OK, it's gonna give you a nose bleed just climbing up into the cab, its got the aerodynamic efficiency of a small building and you now will have a big heat generator is under your butt so put on 3 pair of undies so you don't cook the family jewels. Yep, it all sounds just like my kind of project.:mm:
|
Re: Loadmaster '47 COE
OK so with most of the floor complete I decided to spend a little some more time on filling more holes.
http://i562.photobucket.com/albums/s...E/DSCI0351.jpg http://i562.photobucket.com/albums/s...E/DSCI0354.jpg I just patched the ones for the old mirror mounts for now, If later I decide on showy paint I'll go back and redo them. The dash was another story, it had an extra hole above the headlight switch. There was a push button in that location but I'm not sure what it was for. I cut a little tab, shaped it and welded it in place. It came out fine and a little filler primer should finish the job. http://i562.photobucket.com/albums/s...E/DSCI0361.jpg http://i562.photobucket.com/albums/s...E/DSCI0362.jpg http://i562.photobucket.com/albums/s...E/DSCI0363.jpg Rob |
Re: Loadmaster '47 COE
Decided to clamp things together to get a visual of where I'm at as far as ground clearance on the running boards etc..you can see from the first 2 picks I should be OK for fender clearance as long as I don't do any off roading. For the last picture this is my basic engine space. An LS engine with the Vette or F body intake and oil pan measures about 28 inches, if I go 3 inches up on the back of the cab I can maintain around 6 inches ground clearance. If I flip the intake backwards and run the low mount alternator I can push about half the engine behind and under the seat. I will of course have to make an access panel for front engine maintenance. My thinking is with a newer model drive train once I work out the normal start up bugs I will not be spending a lot of time working on the engine. I have EFI in both my other rides ('46 1/2 ton and '65 FFR Cobra) and they are almost maintenance free. The more I can move the engine to the front the better. I want to avoid a 10 foot bed. 7 foot or 8 foot would be fine. I plan on doing some towing with this thing and maybe a 5th wheel. The engine location and options are still in the planning phases. As a matter fact the whole chassis is still in the planning phase.
Rob http://i562.photobucket.com/albums/s...E/DSCI0313.jpg http://i562.photobucket.com/albums/s...E/DSCI0321.jpg http://i562.photobucket.com/albums/s...E/DSCI0315.jpg |
Re: Loadmaster '47 COE
I've got a couple of questions if any of you guys own a 2000-2006 GM 1/2 ton. I have read they have R&P steering? This being the case is it front steer? Is there any reason why, with some modifications to the mount, the rack couldn't be rotated upwards so the COE steering could be connected? I don't have one to look at in my present location. Ant pictures would be great.
Thanks in advance, Rob |
Re: Loadmaster '47 COE
Rob, I did a bunch of work on a 48 Ford COE a few years back. I used a side winder steering box from CEN-PEN Speed Shop (cenpen.com) to get the steering in. I also used a Flaming river shorty steering column which I think was about 12" long. It was a real pain to get the steering in but it works great. If you want I can dig up some pictures. COEs seem like the steering is a pain because of how far forward the cab is. Everything looks great so far. I would love to build one some day.
Shannon |
Re: Loadmaster '47 COE
You are correct Shannon, everything I've read on the COE builds says the same thing. Steering always seems to be a challenge. That's one of the reasons I'm looking at the late model a R&P unit, it may make it easier in this area. Of course there's the other reasons: LS/4L60E, Disc brakes, cable shifter and drive by wire. The latter 2 will help a lot with a mid-engine set up. Is this side winder unit you speak of some kind of a rack or a traditional style gearbox?
Rob |
Re: Loadmaster '47 COE
Rob, it is a cheaper version of the clear steer units that speedway sells. It has gears that are in an aluminium case with a 3/4 DD shafts out of each side and end. I guess you can say it is an offset box. Check it out.
Shannon |
Re: Loadmaster '47 COE
nice find, good price too :D
be sure to check out buggy"s build of his 57? crew cab, not saying you should crew cab it but he has all new running gear. |
Re: Loadmaster '47 COE
OK, Shannon so I've been searching for Buggy"s build and I can't find it anywhere, sounds like what I need to see, any help?
Thanks, Rob |
Re: Loadmaster '47 COE
I copied the Buggy link (I hope). see below:
http://67-72chevytrucks.com/vboard/s...ighlight=buggy If I didn't do it right, search the word Buggy in this section, then look at his "Big Bertha" build. |
Re: Loadmaster '47 COE
Thank's for the link. Started working on the passenger door. Most of the parts are in good shape except the window crank gears. I ordered new rollers, crank handles, a gear set, arm rests, panel/SS trim, outside handles, seals, tinted glass, glass seals, wipers. Door bottoms are solid with only minor surface rust. Both doors have the lower hinge area pushed in, it looks like at one time they used a block of wood to attempt to adjust the door alignment. I as able to fix this for the most part. Not perfect by any means but it will do.
http://i562.photobucket.com/albums/s...E/DSCI0336.jpg http://i562.photobucket.com/albums/s...E/DSCI0337.jpg http://i562.photobucket.com/albums/s...DSCI0340-1.jpghttp://i562.photobucket.com/albums/s...E/DSCI0404.jpg http://i562.photobucket.com/albums/s...E/DSCI0402.jpg Rob |
Re: Loadmaster '47 COE
Stripped the inside of the cab and started painting. The dash turned out like crap the first go around, I did not allow enough flash time between coats, sanded it back down and resprayed it, got it right the second time. Keep in mind this is being built as a daily driver and work truck. I want it to be clean and dry on the inside but not a show truck. I will be spending the money on the drive train and mods to make it serviceable.
http://i562.photobucket.com/albums/s...E/DSCI0359.jpg http://i562.photobucket.com/albums/s...E/DSCI0365.jpg http://i562.photobucket.com/albums/s...E/DSCI0369.jpg http://i562.photobucket.com/albums/s...E/DSCI0372.jpg [/URL]ucket.com/user/fasttoys/media/47%20COE/DSCI0370.jpg.html]http://i562.photobucket.com/albums/s...E/DSCI0370.jpg[/URL] http://i562.photobucket.com/albums/s...E/DSCI0374.jpg [URL=http://s562.photob[URL=http://s562.photobucket.com/user/fasttoys/media/47%20COE/DSCI0375.jpg.html]http://i562.photobucket.com/albums/s...E/DSCI0375.jpg |
Re: Loadmaster '47 COE
More work on the interior, got the insulation on the roof and installed the headliner, started the trim work.
http://i562.photobucket.com/albums/s...E/DSCI0377.jpg http://i562.photobucket.com/albums/s...E/DSCI0378.jpg Installed the sun visors, dome light, rear glass and some of the weather stripping. http://i562.photobucket.com/albums/s...E/DSCI0384.jpg http://i562.photobucket.com/albums/s...E/DSCI0392.jpg Rob |
Re: Loadmaster '47 COE
Looks great! Too bad about the re do on the dash. Oh well that's life:lol:
|
Re: Loadmaster '47 COE
lookin good
|
Re: Loadmaster '47 COE
Thanks guys, on to the door again. Got the glass and window channel in, still new to paint the inside molding. Red or black? I think I'm gonna regret going with stock door latches. I have only redone 1 door at this time so I may regroup and put in the bear claw while it's still semi apart.
http://i562.photobucket.com/albums/s...E/DSCI0405.jpg http://i562.photobucket.com/albums/s...E/DSCI0410.jpg http://i562.photobucket.com/albums/s...E/DSCI0411.jpg Rob |
Re: Loadmaster '47 COE
Great work you're doing here! Are those aftermarket head liner and door panels or stuff you've made? It looks nice! Also, what kind of paint did you use? It is looking great!
|
Re: Loadmaster '47 COE
Also, the visor on this cab, are they the same as a regular pick up? I need to find one for our 54.
|
Re: Loadmaster '47 COE
So far all my interior pieces have come from Classicparts.com, prices are fair and quality has been good for the most part. For the sun visors and mounts they are the same as the regular pick-up, as a matter of fact..the whole cab is the same only the lower part of the doors and the flooring was changed for the COE, and of course everything forward of the fire wall. The paint is Red Krylon in a can.
Oh, one more thing if you need a windshield and you have the 2 piece style, order 1 and not 2. I now have an extra windshield. Rob |
Re: Loadmaster '47 COE
new stock latches are a lot nicer than the old worn out latches
get new latches and striker plates and go with it. yeah bearclaws are nice but also a lot of work to look finished |
Re: Loadmaster '47 COE
Just looked at this thread, nice project. If you need a passenger side latch and it is the same as standard truck pm me. I got two passengers sides in a pair I ordered and did not look carefully 7 years ago.
|
Re: Loadmaster '47 COE
Thanks for the offer Orrie. My passenger side is in good shape, I did have to buy a new one for the drivers side and I got a new pair of strikers. My hinges seem to be in good shape. I'll get all that stuff mounted on my next trip.
Rob |
Re: Loadmaster '47 COE
Got most of the dash put together, still lack gauges. Rebuilt both the upper and side vents and added new seals. Windshields are in and wipers are finished.
http://i562.photobucket.com/albums/s...s/DSCI0387.jpg Just a note on the seals for the vents, the molded rubber seals are a bit hard and the springs holding the vents closed are not up to the task. I may end up changing to the foam style later. http://i562.photobucket.com/albums/s...E/DSCI0391.jpg http://i562.photobucket.com/albums/s...E/DSCI0395.jpg http://i562.photobucket.com/albums/s...E/DSCI0393.jpg Rob |
All times are GMT -4. The time now is 12:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com