![]() |
73-87 cab corner 6X9 speaker brackets - 2nd series
1 Attachment(s)
These speaker brackets are very similar to the ones I have sold on here in the past, but I made a couple changes (based off customer feedback).
The two changes made were centering the speaker opening, and putting a small radius on the exosed corners for a more "finished" look. These will fit most 6x9 speakers, however, I found out the hard way they will not accomodate 6x9's with 4" diameter magnets. With that being said, I assume you could make them work with the use of a small spacer or slight modifying and repositioning of the speaker bracket itself. 6x9's with a 3 1/4" magnet fit absolutely perfect with no modifications needed. These are made of heavy 16 ga steel, will be delivered bare steel, so you'll need to paint to match your interior or exterior. Basic self-tapping sheet metal screws will be provided. I decided to use stainless steel button head screws and lock nuts when I mounted these in my '73, felt it matched my interior better. Please study the below picture carefully to ensure these brackets will fit your truck. I believe some of the early 3-point belt trucks had the retractors mounted where the top of these brackets sit...and therefore will not work. These will also fit 88-91 OBS crew cabs. Price for a set of these will be $65 shipped to your door (lower 48 only). I feel this is very comparable to those carpeted 6x9 boxes or other fiberglass/plastic enclosures available...but look 10 times better and are quality made out of steel, just like the trucks they are going in. To see pictures and read feedback of others who have purchased these from me in the past, please click the link below. http://67-72chevytrucks.com/vboard/s...d.php?t=287987 If interested, please reply here and send me a PM. I accept and prefer PAYPAL, but will take money orders or cashiers checks. |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
10 SETS LEFT. 7 with openings, 3 without
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
9 SETS LEFT. 6 with openings, 3 without
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
I'll take two sets for 6x9's
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
4 sets left, 1 with openings, 3 without openings
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Those are pretty sweet! I'll have to get a set when the time comes.
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Quote:
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
3 SETS LEFT, ALL WITHOUT HOLES. Thanks Adam!
I will place an order for another run, all with openings...stay tuned. |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
I will take a set with holes when they come in.
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
those are cool.. beats the heck out of the factory brackets.. nice work
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
If anyone waiting for a set wants mine I will sell you mine (Jeff is ok with it) they are brand new just the way I received them these are the first series and I paid 53.00 for them I would like to get that back out of them.
thanks, Randy PS thanks Jeff, You have a great product there. Randy |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
No sweat Randy, good luck with everything.
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
I will take a set with holes if you still have them. Thanks.
Bill |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Bill, I am waiting for the shop to finish up the next batch. If you like, purchase the set Randy is trying to sell 2 post up. The only real difference is the speaker placement on the brackets...which was just for looks why it was changed.
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
i'll take a set with holes....thanx
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Quote:
Bill |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
ordered mine up last week, no real rush though...
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
I'm interested in a set of brackets with the holes in them. Are you going to poston this thread when you get more done? Thanks! :ito:
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
OK folks, I will have several sets with 6x9 openings available for shipment Wednesday (7/1). If you would like a set, please PM me. I will be out of town 7/4-7/11, so the earlier you PM me and pay, the quicker you will get your brackets.
Also, Randy has 1 set available, for less than these new sets are going for (shipping was cheaper when he purchased his, and they didn't coat as much to make due to ower steel prices at the time). Please contact him if you would like, it will help him out too and save you a little coin to boot. |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
TTT
Back from vacation, several sets still available. :) |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
I'll take a set with openings if you have any left.
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
PM sent g30
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Paypal sent!
Thanks, Neil |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
paypal sent.
thanks |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
I bought one of the early sets covered them in dark blue tweed and they look great, theses are a good deal!
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Are there any left with openings?
Thanks! Bryan |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Quote:
$62 to your door. PAYPAL is jeffdodge4827@msn.com |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Quote:
My PayPal info is correct, just send them to that addy. Thanks! Bryan |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Got it Bryan, thanks!
They will go out today priority mail...look for them Wed or so. |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Quote:
Thanks! Bryan |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
me too please:)
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Quote:
You must be John V?? :) |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
My friends call me J.
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Quote:
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Quote:
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
I'd like a pair with the holes, money's been sent!
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Ttt
|
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Just checking to see if you still have the 6x9 speaker brackets and if you have any info on the whether a 4" magnet will work....with massaging. Unfortunatley my magnets are 4" so I'm not sure what to do.
Thanks |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Quote:
My 4" magnets wouldn't fit, but. I found some 1" spacers on eBay for 6X9 speakers, worked out good for me. |
Re: 73-87 cab corner 6X9 speaker brackets - 2nd series
Nukes16, yes, I still have a few brackets left. If interested, payment info is back on page 1 of this thread.
Bryan, that is good to know, thanks for the info. Now can you post a picture of them installed? :) |
All times are GMT -4. The time now is 09:56 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com