Parting out 84 Chevy 3/4 ton 4x4*
5 Attachment(s)
I have this truck that has back DMV fees of $1700 owed.:waah: I don't think it will ever see the road again. The interior has been stripped, but most pieces are in the bed. Notice the wood steering wheel.
tilt column with bad steering wheel threads $40 plus shipping 14 bolt rear and GM front axle $300 pair local only radiator $50 plus shipping 350 engine low miles runs great $400 local only SOLD 208 t-case formerly mated to 700r4 $50 local only wing windows $20 each plus shipping The bed and back end of the frame are gone. This is a nice rust free cab for patch panels. Ask and I will quote prices. Thanks, Ray |
Re: Parting out 84 Chevy 3/4 ton 4x4
Looks like a nice set of Warn premium hubs for somebody.
|
Re: Parting out 84 Chevy 3/4 ton 4x4
5 Attachment(s)
Quote:
uncut gauge bezel $20 plus shipping SOLD misc trim pieces $5 each plus shipping A pillars, headliner SOLD maroon arm rests $5 each plus shipping |
Re: Parting out 84 Chevy 3/4 ton 4x4
3 Attachment(s)
700r4 flywheel cover $25 plus shipping
factory tow hooks $30pr. plus shipping SOLD misc emblems $5 each plus shipping |
Re: Parting out 84 Chevy 3/4 ton 4x4
I sure would like the rolling chassis, but to far away. :waah:
|
Re: Parting out 84 Chevy 3/4 ton 4x4
how much for the a pillars and the fender emblems shipped to 29151...and also, how does a plastic emblem rust or is that just junk on them...thanks
Chuck |
Re: Parting out 84 Chevy 3/4 ton 4x4
Hey Ray, what are the gauges under the dash? How much for the setup? Does this truck have a non-clock clear plastic that went over the gauges?
Thanks Benjamin. |
Re: Parting out 84 Chevy 3/4 ton 4x4
in the third picture down, you can see the clock in the cluster...
|
Re: Parting out 84 Chevy 3/4 ton 4x4
Thanks, didn't notice it. Still interested in the gauges under the dash. One more question, any idea if they work?
|
Re: Parting out 84 Chevy 3/4 ton 4x4
Does it have a cargo light?
|
Re: Parting out 84 Chevy 3/4 ton 4x4
Quote:
|
Re: Parting out 84 Chevy 3/4 ton 4x4
Quote:
|
Re: Parting out 84 Chevy 3/4 ton 4x4
Quote:
|
Re: Parting out 84 Chevy 3/4 ton 4x4
That sounds good. Any idea what the gauges are first?
|
Re: Parting out 84 Chevy 3/4 ton 4x4
What can you tell me about the carb. Looks to be and Edelbrock "Q-Jet". Is it in good running condition? Willing to sell seperately? If so, how much shipped to 87507?
Thanks! JC |
Re: Parting out 84 Chevy 3/4 ton 4x4
Quote:
|
Re: Parting out 84 Chevy 3/4 ton 4x4
Quote:
|
Re: Parting out 84 Chevy 3/4 ton 4x4
How much for all the headliner trim shipped to 12303, also do you have the glovebox door hinge? if so how much for that too.
BTW nice steering wheel LOL Sarge |
Re: Parting out 84 Chevy 3/4 ton 4x4
3 Attachment(s)
Quote:
|
Re: Parting out 84 Chevy 3/4 ton 4x4
5 Attachment(s)
Pics for 87Bob
|
Re: Parting out 84 Chevy 3/4 ton 4x4
Ray, how much for the dash speaker brackets and all the hardware for them?
|
Re: Parting out 84 Chevy 3/4 ton 4x4
Can you put both of these seatbelt covers in my box too and I need a price...thanks
http://www.67-72chevytrucks.com/vboa...1&d=1260926888 http://www.67-72chevytrucks.com/vboa...1&d=1260934540 |
Re: Parting out 84 Chevy 3/4 ton 4x4
Quote:
|
Re: Parting out 84 Chevy 3/4 ton 4x4
How much for the interior dome light with all the harnessing to the fuse box?
Thanks Frank Is the cargo light still available? Does the price include the harness and switch? Maz18@verizon.net |
Re: Parting out 84 Chevy 3/4 ton 4x4
Quote:
|
Re: Parting out 84 Chevy 3/4 ton 4x4
Quote:
Thanks again and Merry Christmas. |
Re: Parting out 84 Chevy 3/4 ton 4x4
Ray,
Thanks for the reply, if you have the hinge let me know and throw it in the box, if not, let me know how you would like payment and I will get it to ya. Thanks, Sarge |
Re: Parting out 84 Chevy 3/4 ton 4x4
Quote:
Frank maz18@verizon.net |
Re: Parting out 84 Chevy 3/4 ton 4x4
Ok, I'll pass on the gauges as mine all work. I was hoping that one would be a small tach, I'm looking for one if you have one. Still interested in the speaker brackets though.
|
Re: Parting out 84 Chevy 3/4 ton 4x4
56" rear springs? How much shipped to 84118?
|
Re: Parting out 84 Chevy 3/4 ton 4x4
1 Attachment(s)
more pics for 87 Bob.
|
Re: Parting out 84 Chevy 3/4 ton 4x4
If the a pillar trim and the rear cab/b post trim is available how much will that add to the shipping for me. And it looks like I will need the whole glove box to get the hinge?
Thanks, Sarge |
Re: Parting out 84 Chevy 3/4 ton 4x4
I'd be interested in the carb also, when you find out if the engine runs or not. Let me know, no hurry. David
|
Re: Parting out 84 Chevy 3/4 ton 4x4
Quote:
|
Re: Parting out 84 Chevy 3/4 ton 4x4
Quote:
|
Re: Parting out 84 Chevy 3/4 ton 4x4
Any news on the speaker brackets?
Thanks Benjamin. |
Re: Parting out 84 Chevy 3/4 ton 4x4
Quote:
|
Re: Parting out 84 Chevy 3/4 ton 4x4
Quote:
Are these still available as well as the other stuff I asked about...just checking not being pushy. I am in no hurry, just tryin to gather some parts. Thanks, Sarge |
Re: Parting out 84 Chevy 3/4 ton 4x4
Ok, so about $12-$15?
|
Re: Parting out 84 Chevy 3/4 ton 4x4
Quote:
|
All times are GMT -4. The time now is 04:44 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com