DBW pedal mounting bracket
3 Attachment(s)
DBW mounting bracket for Corvette Pedal $60 Shipped via USPS (updated 10/4/2022) Paypal: robhartley@aol.com, enter "CPB" in message block. I did an LS3 (Gen IV motor) installation in my 1968 C10 a while back. When I got to the point of mounting the DBW pedal, I fabbed up this pedal bracket that bolts to the firewall where the factory pedal used to mount. The bracket is made out of 1/4" steel and has the holes punched in them for ease of installation. It is set up to use a 2005+ Corvette DBW pedal (GM Part # 25835421) that can be purchased on Ebay for around $50-75. The color code of the Corvette pedal is the same as the Gen IV truck DBW pedal, you just have to swap 2 wires (I'll look those up and post). The nice part about the Corvette pedal, is that the pad is exactly identical to the gas pedal pad in the 71-72 trucks. This allows you can to use the factory stainless trim on it giving you a clean factory look. The pedal bracket is $50 shipped. If you have any questions let me know. Rob ************** GEN III truck pedal brackets can be found here: http://67-72chevytrucks.com/vboard/s...d.php?t=651123 ************** |
Re: DBW pedal mounting bracket
Does the pedal arm bottom out on the floorboard at wot? What's your paypal?
|
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
Thanks for the info and all your help. PM replied
|
Re: DBW pedal mounting bracket
Whats the part number on that corvette pedal?
|
Re: DBW pedal mounting bracket
I would like one of these brackets. Can you send me your paypal Info.
Also interested in the Corvette pedal p/n if anyone has it. |
Re: DBW pedal mounting bracket
Quote:
Quote:
I added the part number to the my first post. Paypal is robhartley@aol.com. I pick up a new batch early next week, so it will be toward the end of next week before I ship it out. Thanks, Rob |
Re: DBW pedal mounting bracket
That will work fine for me. Paypal payment sent.
|
Re: DBW pedal mounting bracket
So you only have to switch 2 wires to run this on a 04 5.3 motor?
|
Re: DBW pedal mounting bracket
Quote:
Quote:
|
Re: DBW pedal mounting bracket
I don't have my pedal yet. I have an 04 5.3. Just trying to plan this out and the pedal you have is the best pedal I have seen so far.
|
Re: DBW pedal mounting bracket
I already have an 04 truck pedal. Will this bracket work
|
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
Quote:
Quote:
Quote:
|
Re: DBW pedal mounting bracket
1 Attachment(s)
Another picture of the setup.
|
Re: DBW pedal mounting bracket
Good Deal!
Thanks!!! |
Re: DBW pedal mounting bracket
I ordered one of these and it arrived promptly... Its a very nice heavy duty piece... plan on installing it with the vette pedal assembly this week
|
Re: DBW pedal mounting bracket
do you have a bracket for the 73 up ? I got a 77 with a 6.0 dbw pedal mine sets to high
|
Re: DBW pedal mounting bracket
Quote:
Quote:
Quote:
|
Re: DBW pedal mounting bracket
2 Attachment(s)
my pedal is even with the brake pedal and its a truck pedal with no sweivel my foot gets tired here are a couple fuzzy pics I used the factory 2500hd pedal mount I just lowered it a little and drilled new holes
|
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
Hey Hart Rod,
Was busy and didn't get a chance to take a pic of my 86' and now im out of town. I hope these work for the square body trucks!! Looking forward to your findings! |
Re: DBW pedal mounting bracket
Hart rod,
Do you happen to have a link to the info for repinning the DBW plug so I can use the vette pedal? I am about ready to dive into this part of the project. I have looked on here and Ls1tech and was not able to find anything. |
Re: DBW pedal mounting bracket
Quote:
Quote:
|
Re: DBW pedal mounting bracket
Bump
|
Re: DBW pedal mounting bracket
2 Attachment(s)
Quote:
EDIT: Link to pedal plug http://ls1tech.com/forums/corvette-p...l-pigtail.html |
Re: DBW pedal mounting bracket
Hey rob. I sent you a pm. Thanks bud
|
Re: DBW pedal mounting bracket
. . In to see if a bracket for the truck pedal is in the works. :)
|
Re: DBW pedal mounting bracket
I got mine. Looks great! Thanks Rob
|
Re: DBW pedal mounting bracket
Interested in 1 for a 73-87 if it will work
|
Re: DBW pedal mounting bracket
1 Attachment(s)
Here is a pic of my 1988 C3500 gas pedal. Think it will work?
|
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
What's your paypal?
|
Re: DBW pedal mounting bracket
Just sent payment. My address is
Brad Mauldin 303 Morgan Ave North Augusta, SC 29841 Thanks Brad |
Re: DBW pedal mounting bracket
Do you know the part number for the corvette plug or where i can buy one?
|
Re: DBW pedal mounting bracket
Quote:
https://www.eficonnection.com/eficon...spx?ItemId=579 |
Re: DBW pedal mounting bracket
just curious, will that bracket work with this dbw truck pedal setup?
http://i994.photobucket.com/albums/a...ps923d2d15.jpg |
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
ok thanks
|
Re: DBW pedal mounting bracket
Ok guys, I'm getting close on a bracket that will work with the 2003-2007 factory truck DBW/SUV pedal. Hopefully I will have something in the next week or so. Thanks for your patience.
Rob |
All times are GMT -4. The time now is 06:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com