![]() |
Project "Schrum" 1959 Gmc 100
2 Attachment(s)
Today was a big accomplishment, had the Generator rebuilt,who knew it'd only cost $10. Afterwards I had some help installing the Generator, I then wired the Generator on my own, I bought a battery and some gas and it cranked right up. Even though it was a 3 speed on the column I learned how to drive it within seconds.Parked it up in my Barn for the night.It drove wonderful, although it really needs new Shocks.This truck has been in my Family for three Generations, its got a long story with it.Going to restore it slowly but surely
This is what I was talking about, I swear my name is scratched into the metal.You can see the C, sorta see the A, barely make out the L but you can clearly see the E and the B.I must of scratched in on it when I was younger Laughed pretty hard when I went to shut the door and the Window and Door handles fell off :lol: can't wait to show my other family members when they come around, pretty proud of this truck and how I got it running Later on today, I'll post a video of it running good |
Re: Project "Schrum" 1959 Gmc 100
Nice looking truck, yeah you can almost make out the name in the wheel.
Can't wait to see more on the build. |
Re: Project "Schrum" 1959 Gmc 100
Test driving the truck
Wouldn't run well this morning, figured out it was the Choke Walkthrough of the Engine bay and some of the truck Sorry for the bad quality |
Re: Project "Schrum" 1959 Gmc 100
Gaining some momentum, will be interesting to follow.
|
Re: Project "Schrum" 1959 Gmc 100
Nice looking truck.
Kim |
Re: Project "Schrum" 1959 Gmc 100
3 Attachment(s)
Resting in my Barn
Planning on tomorrow to Primer the Cowl cover Thankfully there is no dents in this truck, just rust The little buddy "Buttons" wanted to get into the truck and scan the area :lol: Found my Pawpaw's old Bottle opener |
Re: Project "Schrum" 1959 Gmc 100
Drove the truck up and down our road, and it did excellent with changing gears etc, wasn't able to get to Primer the cowl cover I can probably do it some time soon.This things drinks gas like its nothing
|
Re: Project "Schrum" 1959 Gmc 100
i have the exact same bottle opener ( minus the rust ) good to see another one
|
Re: Project "Schrum" 1959 Gmc 100
I love it where you live! wide open space! Thanks for the videos~ almost like being there with you! Keep up the good work!
dne' |
Re: Project "Schrum" 1959 Gmc 100
Quote:
Quote:
|
Re: Project "Schrum" 1959 Gmc 100
i have the red one --- and still use it
|
Re: Project "Schrum" 1959 Gmc 100
Quote:
|
Re: Project "Schrum" 1959 Gmc 100
Quote:
I believe it does work Orrie, but there is no speaker.As far as I know it was taken out by my Grandfather.The dash is in excellent shape has very very small rust holes on the end but I am sure it'll be fixed.Hell even the original glove box is still in there(in great shape) except for the damn fact A LOT of stink bugs were in there sleeping, I disturbed them big time :lol: |
Re: Project "Schrum" 1959 Gmc 100
Cool truck. I'll be looking in on this one.
|
Re: Project "Schrum" 1959 Gmc 100
1 Attachment(s)
Bad news, When I went for a ride in my pasture.I hit a bump and the Hood Emblem came off and got ran over.I am a loss for words, beyond mad.I hope it can be fixed (welded or whatever) Upset me a lot to find it in the pasture broken in two :(
The E-Brake cable is fine, but the Handbrake isn't holding it tight like it should be.I think its down on the frame that bracket There is "HOT Air" coming from the back of the valve cover, guessing its normal but its melting the Paint off of the Valve cover :lol: while I was checking things, the radiator was up to date.Brake lines and brakes were good.What type of Shocks did these come with?, because I am bouncing all over the place because it doesn't have any.Other then that the truck "Mechanically" is up to date on things and runs perfectly.Shifts like it should, stops like it should....but hell this truck sounds like a monster truck coming through :lol: finally figured out how to do the Choke etc, although I have a question about the Choke, if I leave it out after starting it up..Could it just make the engine cut off??.Because at times the truck will cut off, not sure if its because I forgot its still in 2nd Gear or something else. |
Re: Project "Schrum" 1959 Gmc 100
That sucks about the emblem.
Sorry I can't help with the questions though. Kim |
Re: Project "Schrum" 1959 Gmc 100
Thanks Kim, yeah I figure I can get someone to fix it (I hope)
|
Re: Project "Schrum" 1959 Gmc 100
Might want to take some time and crawl around, over and under to check the rest of the nuts and bolts to see what else the PO just sort of attached. Might find some important stuff. I did on mine this summer and found I had not tightened down the front motor mount nuts all the way and had a rear brake line extension bracket that I had not installed.
|
Re: Project "Schrum" 1959 Gmc 100
Orrie,I put all of the old bolts in a Cup filled with Pepsi and sure enough it ate the rust away from the metal BUT, however I don't know exactly where these Bolts go.and also Orrie, Can you show me how the Parking Brake Cable is supposed to go in the bracket on the frame?, I think I left the PB up and it knocked it out of place because the cable isn't cut or broken but more like its out of place.The Bed fenders need new bolts and with that I am going to try and get the stainless steel bolts to pretty the trucks bed up..I've mad a decision on the First by and thats going to be a "Front Bed panel" for the bed because thats all I'll need to complete the bed, I will probably need new Bed Steps but I'll just see what a Welder can do with it.The Tailgate seems to be savable it has almost a micro rust hole on the bottom right side "hoping" it will be savable because that will save me some money.Looking at all thats needing to be done to this truck really makes me scratch my head on how all of this is going to be completed.There are little dimples on the inner bed panel and I am not sure how you would fix that (no I am not looking to buy new ones) I'd like to save these because in my opinion these are savable.I think I'm going to just put a seat cover over the trucks Seat instead of having it re-done
|
Re: Project "Schrum" 1959 Gmc 100
3 Attachment(s)
Here is a photo of the brackets at the back brace. The cable from the front mounts in the hole on the right side with a U shaped bracket. Note the spring and rod used to attach it to the pivoting flat bar. The cable runs behind the pulley on the drivers inside frame, then up to the lever on the frame near the steering box. The level is acuated by a rod that goes to the handle under the dash. I included a photo of the parts on my workbench.
|
Re: Project "Schrum" 1959 Gmc 100
Thanks Orrie, I don't know what happened to my pulley it must of fell off or something because a pulley isn't there.The Cable seems to be in good shape. I can't think, I don't think the truck had a pulley when I brought it back home.If I would have left the Handbrake up you don't think it would of popped the Pulley off??? I don't think it would of because it looks to be "bolted" in...Do they make an aftermarket one ?
|
Re: Project "Schrum" 1959 Gmc 100
Quote:
I like your passion to keep family history alive with this truck and hope you find the '71 GMC too. I have a couple of long-time family GMCs also. Not many young guys have an interest in old trucks any more, much less actually trying to build one. DAC |
Re: Project "Schrum" 1959 Gmc 100
i am sure they are not that difficult to fab. i figure - a pully wheel from a sliding glass door screen should get ya in the ball park and just fab and bend some metal bracket to hold it .
if i could find my old one i would send it to ya - but alas i cant find it |
Re: Project "Schrum" 1959 Gmc 100
1 Attachment(s)
I am the type of guy who loves old vintage things, ever watched American Pickers? that is the type of person I am.The love I have for this truck is out of this world and I'm going to keep it all original instead of making it custom
|
Re: Project "Schrum" 1959 Gmc 100
Daze is right, all you need is something that allows the cable to change direction with out rubbing. I spend a lot of time wandering thru the "good" hardware stores just looking at the different things that might be repurposed. Bicycles, motorcycles, lawnmowers, weight benches, etc. all have pulleys that would work, bracket is a simple angle with a stepped bolt for the pulley. There should be two holes in the frame just behind the master cylinder.
|
Re: Project "Schrum" 1959 Gmc 100
I have the Bracket but not the pulley, I wonder if I lost it in the field some where who knows
|
Re: Project "Schrum" 1959 Gmc 100
Here you go, you only need one, they are sold in pairs because the 58-59 cars used the same but needed two. The bolts are sold separately from the pulley. check lmc, pauls and other too.
http://www.classicindustries.com/tru...ake-parts/?p=1 |
Re: Project "Schrum" 1959 Gmc 100
Bad news.I went to start the truck "turned over fine" but then when I had drove it to a neighbors the truck wouldn't start back up.We charged it and it did fine and then cut off again.I know the Plugs,wires and Generator are all good I am thinking it is the Voltage regulator because of it still being the original one that came out of the Factory.The carb is slowly leaking gas at the housing but as far as I know it was re-built
|
Re: Project "Schrum" 1959 Gmc 100
Quote:
Keep that sweet truck all original! |
Re: Project "Schrum" 1959 Gmc 100
2 Attachment(s)
Neighbor sandblasted the Headlight buckets and I sprayed the E-Brake bracket and one of the Buckets, tomorrow its to paint them with High Gloss Black paint
Carb has been re-built and will hook it back up tomorrow ( Will post photo of what it looks like now since it has been cleaned up) |
Re: Project "Schrum" 1959 Gmc 100
Did you find the pulley for the brake cable bracket?
|
Re: Project "Schrum" 1959 Gmc 100
Sure did, found out it was still there.I'll post a photo of what I thought was the e brake bracket I have no clue what it is..Going to finish the buckets today before it rains at 4
|
Re: Project "Schrum" 1959 Gmc 100
Before you assemble your headlights look closely at the adjuster (plastic things, one in your photo has the screw in it). The usually are cracked and need replaced. There is usually an ad on Ebay pretty cheap. EAsy to fix when out, not so after the bucket is installed.
|
Re: Project "Schrum" 1959 Gmc 100
I put the carb on after its rebuild , but now it is popping and running badly.I am guessing it needs to be tuned again.
|
Re: Project "Schrum" 1959 Gmc 100
popping out the tail pipe or carb?
|
Re: Project "Schrum" 1959 Gmc 100
Timing and maybe vacuum leak, messing with the distributor may have affected the dwell, loosened a plug wire.
|
Re: Project "Schrum" 1959 Gmc 100
The tail pipe
1959 Gmc 100 Engine info Firing Order- 153624 Timing -5 BUDC Breaker Point Gap .016 Plug Gap .030 Exhaust .020 Intake .012 |
Re: Project "Schrum" 1959 Gmc 100
Turns out my '59s Engine needs new bearings in it..Basically a rebuild in the near future.Had some mechanics come out and see the Engine, and they tested some things and it turned out the Bearings were pretty much worn out for being so Old..Does anyone know where I can buy The Engine Bearings?
|
Re: Project "Schrum" 1959 Gmc 100
Quote:
|
Re: Project "Schrum" 1959 Gmc 100
Before you can buy any internal parts you need to take it a part and see what needs to be done. How worn is the crank, will standard main bearing work or will it need turned? Now worn are the rods, will the rod journals need turned? How worn are the piston bores, will you need to get new pistons and rebore it? Figure the heads will need to be done too. It is going to be expensive not much demand for the parts so they get a premium for them. If you want to keep it a six cylinder to memorialize your grandfather I bet you can find a later model truck with good 292 for the price of the stock engine rebuild and gain more power a newer transmission and better geared rearend in the deal.
Just curious did the mechanics get it running any better as is? |
All times are GMT -4. The time now is 05:48 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com