How about some pics of 88-98 Trucks
 

Ok guys and gals it's been a while since we had roll call here and there are a lot of new members. Lets play the "post your 88-98 ride" game again. Show us your 88-98 trucks. Tell us what you have and what's in the near future for it, and show us your best pics..... :cool:

Here's A Pic Of My New Project I plan on installing 3x3 angle iron bed rails Three tool boxes ladder rack and 15x8 rally wheels.
Gonna be Work Truck 9000 :bowtie: :burnout:

here's my 88 GMC...got it lowered with 15" Boyd Coddington billet rims :D , lecarra billet steering wheel, candy flames, and 3" Harwood cowl induction hood.....

screamin 350/350hp :metal: motor, with TH350 tranny and 3:73 gears :burnout:


-bigarmzz-
klambert@cebridge.net

Here's my pride and joy
http://www.streetneeds.com/uploads/auser/aug042sm.jpg

If you're interested.... here's a link to my mods :bowtie:

Here's my '89

Here's a few pics of my 95. Before and after a few mods. Next mods are to shave the doors, shave the rear steps, and run airbags. Then custom two tone flames job. Oh and then color match the interior that has been sitting in my living room. :lol:

My 96 Burb

95 tahoe, debadged, 5% tint on all windows, 30% on front windsheild all the way down(ya its illegal)

http://www.imagestation.com/picture/...b/f5f19ad2.jpg
http://www.imagestation.com/picture/...f/f6ae69fc.jpg
http://www.imagestation.com/picture/...a/f6a6ffb7.jpg

'99 Tahoe 2 door 2 w/d got it about 6 months ago i paid $8400.00 for it. Iv'e lowered it 4/4 installed new SS Impala wheels & BFG 255/50zr17, billet grill, clear corners & markers,xeon head lamps,TYC carbon fiber tails,
K&N FIPK, Edelbrock ceramic headers, Flowmaster Force II cat back sys.

And soon to be replace is the carpet and window tint.

90 shortbed
bagged 4 link front upper and lower tubular arms
billet 94 grill with "no bowtie" grill
crystal lights
custom hood
shaved door handels, drip rail, antenna, tail lights, stake pockets
rear roll pan with slotted tail lights
over 1K in billet interior pieces
tweet interior with door panels that mirror pattern of exterior paint
bucket seats out of some sports car pattern matches tonneau cover
custom flames that extend into bed and on top of tonneau cover
huge stereo dvd
tiny 17's they were big when i bought them. 245/40/27 and 275/40/17
engine is slightly built headers, cam, chip, filter, but it is dirty
the list goes on and on

i am buying some 20's any day, but i need help with backspacing and tire size

future

chrome bumper with billet and 4 lights, the painted one keeps getting chipped
detail engine and engine bay
rihno coat bed floor

93 C1500 waitin on the bags
 

Here is my 93 shortbed after the chassis drop. Waitin to rejuvinate the wallet to get the rest of the air ride and 4 link for the rearhttp://www.boomspeed.com/groundpoundr/93sideview1.jpg

And this is after I fabricated and installed the hand crafted LED bowtie taillights and LED backup lights. http://www.boomspeed.com/groundpound...tailights1.jpg

While Iam waiting to bag it Iam shaving the door handles, fuel door, and tailgate.

Here's my '98 Z71. All I have done to it is Tires, Dual Exhaust, and a Cold Air Kit. My next changes are rims and a chip. After that, a new grill, lights and some interior mods. Hope the attached pics work.

I just want to say that this is one great site. I accidently ran across it and have been checking it out for the last few hours. I currently drive an '89 Silverado X-cab Longbox and just recently purchased a '93 Silverado Shortbed with a V-6. My '89 has a 350, auto, had been dropped and running3" exhaust w/no mufflers. Sounds great a cruising speed. The '93 is Teal and I have to get some pics of it. Plans are to drop it down also and change the paint on it. Here is a pic of my '89. Looking forward to talking to a lot of you and frequenting this site quite a bit.

Kevin

1991 Sportside
 

This is my new truck. I haven't seen it yet, I live overseas, my brother looked at it for me. It has 133k miles on it, 4.3 engine and the 5 speed transmission. I will be coming back to the States to live in February so will start working on it then. I am planning to replace the box with a Fleetside box and change the engine to a 350, if the transmission can take it.
Steve

Just dont plan on giving it a hard time with that 5 speed and a 350 ... There not known for being very strong.

man that is absolutely sweeeet :metal:

ya get tired of that baby, let me know :D


-bigarmzz-

here is a pic of my 2000 Tahoe Limited. I bought it for me, but my wife took it....

99 Tahoe
 

Here is my 99 2-Door Tahoe Auto-trac 4x4 LT.
Dual flowmaster exhaust, cowl hood, crystal light assemblies, all trim and emblems shaved, custom paint, aluminum skids, 3" lift, westin Nerfs (black), Trailmaster SSV shocks, complete Kicker audio system including XM radio, 02 Esclalade Steering wheel audio controls, 2000 Denali center console with custom painted trim, 2000 Escalade guage cluster with 120 mph speedo.
http://memimage.cardomain.net/member.../440795_11.jpg
http://memimage.cardomain.net/member...9/440795_2.jpg
http://memimage.cardomain.net/member...9/440795_8.jpg
http://memimage.cardomain.net/member...9/440795_7.jpg

THANKS! I've had her since i was 16 when i first got my license. I got her all stock and fixed it up little by little.My trucks are like if they were one of my love ones, but if one day i get tired of her i'll have you in mind ;)

This is my "new" 1996 2-door Tahoe. When I got it, it was already lowered and riding on 15" American Racing Torq Thrusts with 255/60's in front and 275/50's in the rear. Since I've had it, I changed to clear corners and a billet bowtie in front. Future plans include removing side trim and badges. "Simple" stuff like a cold-air intake and dual Flowmaster exhaust. I would love to get 20's but that's further down the road.

Wife's 96 Cranked torsions, and add-a-leaf for a whopping total of two big inches of lift :p , Billet grille, and bowtie, magnaflow ex, with k&n filter, and somewhere in the neiborhood of 120.000+ miles. 18x9chromes and some 305-60-18 toyo tires.. Just plan on keeping it running, so I can spend money on my other stuff!! :D

My -88 GMC Sierra
 

Here is mine -88 ride, a GMC Sierra.
*Air-ride
*Intro Vista 8.5x20" og 10x22"
*Euro-lights
*V8 350 TBI, TH 700
- Roll pan, four link, air-condition.....


... new look next summer... ;)

http://www.moldestuket.com/gmcsierra104.jpg

http://www.moldestuket.com/gmcsierra14.JPG

http://www.moldestuket.com/gmcsierra15.JPG

http://www.moldestuket.com/gmcsierra19.JPG

http://www.moldestuket.com/gmcsierra23.JPG

http://www.moldestuket.com/gmcsierra32.JPG

http://www.moldestuket.com/gmcsierra36.JPG

http://www.moldestuket.com/moldestuket/surna04ro8.JPG

http://www.moldestuket.com/moldestuket/surna04ro11.JPG

http://www.moldestuket.com/moldestuket/Surna0429.JPG

http://www.lillhege.net/High_low.JPG
High - Low :D

Here is a pic of my 90.
http://img.photobucket.com/albums/v4...454ss-kyle.jpg

Just bought mine yesterday. Its a 99 and I guess its all stock. Not sure on the plans. Don't really want to lift it at all or do anything extreme. Would like to get a paintable grille with no bowtie and some clear corners then remove the mouldings, trim & emblems. Was going to buy some 285/75 truxus for it but no of the offroad shops had them in stock in the city so I guess I'll have to wait for a bit.

Here is my 92 454ss, for more pics and info check out my site http://www.m454ss.com

http://members.aol.com/m454ss/images/92side.jpg


http://members.aol.com/m454ss/images/lokistyle.jpg

heres mine. getting totally redone this winter. c-notch, front bags, wheels, and interior are in store this winter

This is mine its a 96 vortec 350 187000 miles

here's my 95. i just picked it up a few months ago. i havent had time to do anything yet. damn job. :(

anywho....it needs a serious altitude adjustment. i'm gonna put it on air. it has a few scratches here and there so ill probably have the whole truck painted. ive had a boner for flames lately so my a flame job too. oh yea.....and wheels! stock wheels suck.



http://memimage.cardomain.net/member...3_107_full.jpg

Ok, I will play...
1996 C1500 xcab 3door
55k original miles, 100% original paint
5.7 AT
3/4 drop with Hotchiks springs and sway bars
17x8 and 17x9.5 Budnik Shadows
255/60/17 and 275/55/17 Pirelli Scorpion Zeroes
Borla stainless dual exhaust
Impulse LoPro lid

Plans? Black smoothie front bumper, rear roll pan, and cowl hood. For now, I just enjoy driving it! (at least another week before it gets tucked in for winter)

http://pages.prodigy.net/cthallst/im...2003/IMG09.JPG

Here is my 1998 daily driver with a 2/4 drop.

I'm new
 

Hi guys , I'm new, this is my ride

94' silverado
350 auto, 3.73, magnaflow dual exaust, AEM brute force air intake
2/4 belltech drop, roll pan
smooted tailgate and pocket
toneau cover
custom hood and bumper

lots more to come next summer , 4/6 drop and phantom dually!

Here's my '95 Tahoe 2d Sport 350TBI 4x4.
Current "mods" are GrilleCraft insert, billet bowtie, white corners, APC clear bumper lights and projectors. Additionally it's running a full stainless Gibson exhaust (headers-back) and K&N. Wheels are American Racing equipped with balloon tires :D in 265/75x15.

Future plans are (of course!) 20" or 22" rims, rolled pan, bumper cover, a repaint of at least the dark gray areas to black - and possibly a slight lowering if one can still get the 4x4 kits.

http://www.chevyworld.net/chevyken/tahoe/bothcars3.jpg

http://www.chevyworld.net/chevyken/tahoe/bothcars4.jpg

;)
Ken

my 97, dual exhaust k&n filtercharger, possibly 3 inch lift, :bowtie:

This is my friends truck, but I think its pretty cool, so here it is

Here is a pic of my current project. 1996 Ext Cab z71 on a 1985 stretched 1/2 frame. Me and my dad have been spending quite of few hours on the frame and have got the cab mounts level and made cleanly (not cobbled looking). We put the body on to see if things lined up good, which they did. We will have to still make the mounts for the bed... but the main thing is that the wheelwells lined up great center to center and that the cab was level. In the first pic the truck isn't sitting level on the stands. but we have it level now. It has a 14 inch 73-87 suspension lift and around a 4 inch body lift because of the different frame. We have a 454, th400, and 205 divorced tc for it. So over my xmas break it's development for the tc crossmember and then installing the drivetrain. We don't have the axles under the truck because of the height to get it under the door. This gave us around a rough estimate of how high it would sit though. The axles are Dana 60 front and corporate 14 with disc brakes in the rear. I am very excited for the break to get here so I can get further along. Trevor

Heres my 93 dually. 454, 4 inch body drop, 60 inch sliding rag, escalade front end. Currently switching from hydrolics to bags.

HI I'm new here.This is cool site I have a 96 silverdo with a 3 in body lift I did.And I'm looking for a 51 to 54 chevy truck now. For work I'm a auto body mech.So if anyone needs some help with body work or paint need me know. I might be ble to help.... Later jay

Bodymen are good people to become very good friends with when you drive a truck that looks like my '71. Where are you located?

south burbs of chicago. Kinda far from u..Yeah and bodymen are a dying breed lol

I just got a digital camera, so I thought I would give this a shot....

My first and only, its a 90 GMC k1500 with a 350 and 5-speed. The truck has 183k on it and is a little worse for the wear. I'd also like to say that I enjoy this site and appreciate the help I have gotten here. I just wish I could contribute more.

http://img.photobucket.com/albums/v2...5/P1010014.jpg