The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   parting out 82 crew cab dually (https://67-72chevytrucks.com/vboard/showthread.php?t=178027)

454malibuwagon 10-25-2005 08:30 PM

parting out 82 crew cab dually
 
i have bought a newer truck and have decided to part out my project, it is an 82 crew cab, it has a 87 fi 454 in it with only 30,000 miles on it, grey interior out of a 89 subururban and also has an 89 fron clip on it, i will list a few of the parts and prices, but if there is anything you need let me know as i should have it as this is a complete truck.

fuel injected 454 complete from air cleaner to oil pan and fan to flywheel $1000
82 454 ran when pulled $600 obo
89 front clip complete $500
front bucket seat and console with brackets, grey $250
alum. alco wheels for dually with caps $500
grey dash pad for 81 to 87 nice no cracks $ 150

bigger item i will not ship, all prices list do not include shipping can get pics of anything you may want to see, post here with anything else you may need or email me at chrisnmadonna@acsnet.com if my prices seem to high make me an offer i need this thing gone
Thanks

rich-white 10-25-2005 08:44 PM

Re: parting out 82 crew cab dually
 
Can you sent me pics of the wheels? send to rich-white@sbcglobal.net and wheere in Iowa are you?

bigarmzz 10-25-2005 09:25 PM

Re: parting out 82 crew cab dually
 
whats the door panels like?:confused: pics?

would you be willing to sell just the big block brackets/pulleys from the 82?..????

454malibuwagon 10-25-2005 10:32 PM

Re: parting out 82 crew cab dually
 
will get pics of wheels after work tommorrow
door panels are in good shape they have power windows and locks, i have two sets of complete doors with the grey panels will get pics of them too,just let me know where to send them too. as for the brackets on the 82 454 all i have is the ones for the alt. and the lower pulley but i would sell them seperate
all parts are in Hawarden Ia (northwest corner)

454malibuwagon 10-27-2005 08:31 PM

Re: parting out 82 crew cab dually
 
was cleaning and found more parts
2 81 to 87 hoods $50 obo
set of 81 to 87 fenders $50 obo
81 to 87 single headlight rad support $50 obo
81 to 87 dual headlight rad support $50 obo
complete 350 taken out of dually to put in 454 $300 obo
i have lots of parts as i had two parts trucks i was using to build this dually so ask and i may just have it, i need to get rid of this stuff so make offers

bisquik65 10-27-2005 08:47 PM

Re: parting out 82 crew cab dually
 
Do you have any hydraboost setups? for a 1 ton...just need the booster off the fire wall and the lines....

454malibuwagon 10-27-2005 10:06 PM

Re: parting out 82 crew cab dually
 
i converted it to vacuum boost and got rid of the hydraboost but i may know where another on is will check and see

a28doc 10-27-2005 11:53 PM

Re: parting out 82 crew cab dually
 
per board rules need to list prices for all parts so there is no confusion on prices thanks Doc

bisquik65 10-28-2005 08:32 PM

Re: parting out 82 crew cab dually
 
Quote:

Originally Posted by 454malibuwagon
i converted it to vacuum boost and got rid of the hydraboost but i may know where another on is will check and see


Let me know,I need one very soon..I want my 69 rollback road ready...If it has the lines thats fine,i have a few lines here...mainly need the hyd. unit...no master cly...i will get a new one...And will save on shipping...

I really need 2 setups...Thanks,Erick

Stomper_1_Ton 10-30-2005 08:07 PM

Re: parting out 82 crew cab dually
 
You have e-mail.

454malibuwagon 10-30-2005 09:22 PM

Re: parting out 82 crew cab dually
 
bigarmzz, email me addy and i will sent pics of door panels
bisquik65, no luck on finding one yet but i will keep looking and let you know

Paradise Ridge 10-31-2005 11:43 AM

Re: parting out 82 crew cab dually
 
Mornin!
I'm rebuilding my '82 K30 and a bunch of the parts would fit.

Pics woulds be great. I'm looking for a grey interior, a dash pad, seat belts, etc.

I need to check into axles. Mine is currently a flatbed with adapters (I know) and I need to get actual dually axles.

Scott

82c10 10-31-2005 09:31 PM

Re: parting out 82 crew cab dually
 
pics of the dashpad please

454malibuwagon 10-31-2005 11:14 PM

Re: parting out 82 crew cab dually
 
i dont know how to post pics so anyone that needs pics of anything please email me a address to send pics to and i will get them to you
Thanks

86 GMG 11-02-2005 01:43 PM

Re: parting out 82 crew cab dually
 
i would like the 81-87 fenders (you stated set $50 obo plus ride if this is correct i will take them just send me pics to sfstul@yahoo.com i will send a mo out asap if the pic are sent and i like the fenders they dont have to be perfect but original gm and in exceptable condition please send pics asapthanks gmg

454malibuwagon 11-07-2005 08:04 PM

Re: parting out 82 crew cab dually
 
ttt

72jimmy4x4 11-08-2005 08:50 PM

Re: parting out 82 crew cab dually
 
Looking for the trim pieces around windows and headliner.U got?

454malibuwagon 11-11-2005 09:19 AM

Re: parting out 82 crew cab dually
 
headliner is out of an burb and has the overhead console in it and i have all the trim for it also have the white headliner and trim that was in it that i took out to put the grey one in, let me know where to email pics too and i will get pics of both
Thanks

72jimmy4x4 11-11-2005 12:41 PM

Re: parting out 82 crew cab dually
 
Pics to jimmy72@shaw.ca for the trim pieces.Price seperate and together and method of payment. Thanks. Brian

benoit454 11-14-2005 03:10 PM

Re: parting out 82 crew cab dually
 
Are you going to cut up anything like frame wise? I need a spring hanger for an 86 k10 and most 4x4's I've seen have the wrong one but some 3/4 ton or duallies I have seen from this site seem to have the same one. If so could you get me some pics and price? I need the driver's side front hanger for the rear leaf springs. I don't know if the passenger side is the same or not.

My email is benoit454@yahoo.com

6camaro9 11-19-2005 09:38 AM

Re: parting out 82 crew cab dually
 
email sent about marker light.

thomas...

454malibuwagon 11-21-2005 09:17 AM

Re: parting out 82 crew cab dually
 
6camaro9 never got your email

benoit454 11-22-2005 12:12 AM

Re: parting out 82 crew cab dually
 
Did it have the side mounted gas tank? Driver's side maybe? I need some gas tank mounting brackets, I don't know if the ones bolt to the frame on a 2nd are the same as my 4x4 or not. I know instead of one bracket and strap mine has a bracket bolted to the frame and once that goes from it to the other side of the tank then the strap.

6camaro9 11-22-2005 12:17 PM

Re: parting out 82 crew cab dually
 
Quote:

Originally Posted by 454malibuwagon
6camaro9 never got your email

i sent it to this addy chrisnmadonna@acsnet.com from my work.

thanks,
thomas...

Litdave 11-23-2005 07:27 PM

Re: parting out 82 crew cab dually
 
Are you going to be selling the frame, axles, trans, wheels? I am looking for a rolling frame for a 1-ton dually.

Thanks,
Dave

454malibuwagon 11-23-2005 08:37 PM

Re: parting out 82 crew cab dually
 
litdave, yes i am planning on selling everything off this truck i want to get it out of my yard, if you want to call me about it i can give you more info on it
1-712-551-2245

6camaro9, still never got email try to send it again

benoit45, it has dual tanks on it but i not sure what shape the mounts are in as it has plastic covers over them , how many do you need as i have a couple of tanks around with the mounts on them yet

Thanks, Chris

Dean 11-23-2005 08:45 PM

Re: parting out 82 crew cab dually
 
Let me know if you have the 30 emblems from the front fenders or a big block fan shroud.

benoit454 11-25-2005 08:06 PM

Re: parting out 82 crew cab dually
 
My tank is kinda hard to explain it has the bracket the mounts to the driver's frame rail, then a 2nd bracket mad just the same as the frame one, but with one hole in center bottom for a big stud to stick thru, and one hole on the side up by the rocker panel for the metal band. I only need the 2 frame brackets and the 2 outer brackets, my straps are ok but if you have the whole setup that be cool, so basically everything that mounts the tank. But my 76 and most I've seen here only have the one bracket up front and back, that bolts to the frame, then the straps mount to them. I can't use thoose kind.

kevinr1970 12-08-2005 02:44 AM

Re: parting out 82 crew cab dually
 
I'm looking for seat brackets for the front bench seat - assuming the CC has a flat floor. Also assuming that a bench seat is the same in a reg cab and a CC with different brackets. If I'm wrong someone let me know.
Trying to put a bench seat in my Blazer.

454malibuwagon 12-09-2005 09:22 AM

Re: parting out 82 crew cab dually
 
i have the brackets off the bench as i went to buckets in it, but i dont know if there is any diff. between them and ones out of a reg cab, if you want them i would take 20 plus shipping
Thanks, Chris

86 GMG 12-09-2005 12:11 PM

Re: parting out 82 crew cab dually
 
hey! Chris should have asked this when i bought the fenders but i didnt see it then ???? but the grey dash can you send me some pics www.sfstul@yahoo.com
if it hasnt sold yet i say that 82c10 was asking about it if it is in the middle of a deal let me know if it falls through thanks matt

aesj2 12-09-2005 08:00 PM

Re: parting out 82 crew cab dually
 
What about the rear fenders. Any good? Pics? Price?

stkcode 12-10-2005 02:27 PM

Re: parting out 82 crew cab dually
 
I'd be interested in the overhead console and bracket...if it's not already spoken for. Any possibilities of a price and/or pics? Thanks!

71swb4x4 12-10-2005 03:05 PM

Re: parting out 82 crew cab dually
 
454malibuwagon, we're practically neighbors!
Do you still have the 454's?

454malibuwagon 12-11-2005 09:37 PM

Re: parting out 82 crew cab dually
 
86 GMC i will get pics to you of the dash pad

aesj2 give me you email address and i will get you pics of rear fenders and price

stkcode give me your email address and iwll get pics of overhead console and price

71swb4x4 yes i still have both 454s

bisquik65 12-11-2005 11:17 PM

Re: parting out 82 crew cab dually
 
Quote:

Originally Posted by kevinr1970
I'm looking for seat brackets for the front bench seat - assuming the CC has a flat floor. Also assuming that a bench seat is the same in a reg cab and a CC with different brackets. If I'm wrong someone let me know.
Trying to put a bench seat in my Blazer.


The crew cab and burbs share the same floor pan...The blazers are different...Because the pickups have the floor raised to clear the gastank on both sides...Blazer seats are like a van on a pedastal.

71swb4x4 12-11-2005 11:29 PM

Re: parting out 82 crew cab dually
 
Chris, does the 87 454 come with the harness and computer?
Shawn

454malibuwagon 12-11-2005 11:41 PM

Re: parting out 82 crew cab dually
 
yes it will come with the complete harness and computer also have the complete dash harness and guages and the harness for the fuel pumps and dual tanks,
Thanks, Chris

aesj2 12-14-2005 12:50 AM

Re: parting out 82 crew cab dually
 
454malibuwagon you have a p.m., but I will also post here. email aesj2 to asmith194116@yahoo.com
Thanks.

67mbsc 12-14-2005 01:40 AM

Re: parting out 82 crew cab dually
 
I've sent yall a PM


All times are GMT -4. The time now is 12:25 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com