Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

I have an extreemly nice pair of Longhorn Bedsides. A couple of dings, scrapes and light creases where something had rubbed against them. All easely fixed!! These bedsides are not even pitted anywhere!! Not on the lips not in the sides. The taillight areas have not ever been hit either. No holes drilled in the tops of them for canopies either. The tool box lid is in mint condition, as is the area of the bedside where it mounts!! Did I say NO RUST!!! Original paint!!! What you see is what you get!!! $250.00 for the Left one. $650.00 for the right one with the lid and box. (the spare tank is gone) WES www.ClassicHeartbeat.com

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

More pictures!!!

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

more pictures again...

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Last group!!! Whewwww!!! WES www.ClassicHeartbeat.com

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

I dont need them......but those pcs do look nice, TTT :crazy: longhorn

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Wes - Those sure look nice. I know what you mean but I think you have your sides mixed up - the tool box is on the right side not the left.

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Find me those sides in a standard 8 ft bed!! Very nice rare pieces. I bet a longhorn setup to haul a nice camper would make a fun summer caming setup.

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Thanks guys, These are realy nice parts. If they don't sell I will probably get a Longhorn in here some day that will need fixing up.. I even thought about building a steel floor for them out of a couple of beds that I have with bad sides and nice bottoms. That would be cool too. It would look like it came that way from the factory.... Hmmmmm
Your right Bob, Thank you for pointing that out... I will have to edit my discription... LOL
WES www.ClassicHeartbeat.com

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Wes, really nice 69/70 longhorn f/s in spokane, I'd like the engine tranny setup but don't need the rest, interested in the rest?

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

I might be. It depends on the condition and how much money. Let me know. WES

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Wes,
those sides look really clean, they should sell quick. finding regular longbed sides that clean is real tough nowadays but longhorn sides that nice are a rare find indeed.
i picked up a longbed a few years ago that is the nicest i've ever seen, has the factory tank and toolbox, original paint and had a camper shell on it since new. it got one dent that looks like someone shot it with a BB gun, even the floor is perfect. the person who owned it passed away and his son drove it to the wrecking yard and gave it to them. they charged me $350.00 for it and even loaded it for me. lately it's been tough finding good affordable sheetmetal at my local yards so if you longhorn guys need nice bedsides, i'd jump on those.

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

back to the top... WES

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

droooooooool....

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Wes,

You wouldn't happen to have some junk bed sided? I need both L&R bed ends (tail light and back up light) about 8-10 inches rear to front.

Rob

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

I think that I have a R/H side piece now. I will have to check. I know that it has a split on the very bottom that I could weld up to fix. I will pull it out lator and see. The end also had a taillight bezel on it so the holes are there for them. Is that what you want? Let me know. WES

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Wes,

Sounds like what I need. I would like to see some pics and a price (32571). Don't worry about welding anything up, I will take care of that.

Rob

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

How does $20.00 plus shipping sound? You tell me where to cut it. WES www.ClassicHeartbeat.com

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Wes,

Around the 12 inch mark looks good. Any idea on shipping? Let me know.

Rob

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

I will clean up any excess that is not needed, box it weigh it and I will let you know a firm shipping price. Guessing the weight at 25 pounds it will be $19.00 to a residence and 2 or 3 bucks cheaper to a business. WES

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

HHhhmmmmmm!
Very Interesting, :c2:
I like the tool box, but I think I like my 3rd gas tank in that place I have currently!
Too Bad, I would take them had I not had the 3rd tank!
Good Luck!
:b69:

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Hart_Rob, It came to 20 pounds exactly after I got it all packed up. Shipping to you is $17.14 to a residence and $15.56 to a business. Let me know what you want to do. It is ready to go. WES

RPOZ11, The tool box option is on the Passinger side and the spair tank option is on the driver side. WES www.ClassicHeartbeat.com

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Wes - thanks, what is your paypal address?

Rob

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Wes - Paypal sent.

Rob

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Thank you Rob. It will go out tomorrow. FedEx is not working today. WES

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Wes, if you could UPS I would appreciate it, FEDEX never seems to be able to find my house.

Rob

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

It went out UPS Ground today...Ouch!! They charged $26.15 to ship that... Here is the tracking number: 1z940x310343260188
WES www.ClassicHeartbeat.com

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Thanks Wes,

Rob

Re: Rust Free Longhorn Bedsides W/Tool Box & Factory Spair Tank
 

Your welcome and thank you for the little extra in the paypal... WES www.Classicheartbeat.com