New forum member from Canada
 

Hey All,

I have just joined this board. My name is Jim, and I reside in Winnipeg Canada. I have just aquired a 1967 GMC 910. I have had 1970 C10. 1969 C10 and a 1972 C2500.

The 67 is a project that I plan to have finished, or at least painted by end of summer. It has a straight 6 with 3 on the tree. I haven't entirely decided on the engine. For vintage engines I will only consider a 302 or 327, and any big block other than 454. Otherwise I will drop in a 6.2 or 6.5 diesel, or a modern 5.3. It will likely have a 4 or 5 speed.

I want to make it an extended cab, but that will be later, maybe in a few years. I will put in AC, PW, PDL and full instrumentation. Everything else is up in the air at the moment.

Jim

Re: New forum member from Canada
 

Welcome to the board. Sounds like you have a nice rigs. What do you have against the 454?

Re: New forum member from Canada
 

The only thing I have against a 454 is it's popularity. I want something more unique that a 350 or a 454.

Jim

Re: New forum member from Canada
 

welcome from BC.

Re: New forum member from Canada
 

Welcome :)

Re: New forum member from Canada
 

:welcome2: from Kentucky!!!

Re: New forum member from Canada
 

Another welcome from Kentucky!

Re: New forum member from Canada
 

Welcome to the board from South Mississippi! Throw a 572 in that bad boy.:D

Re: New forum member from Canada
 

:agree: with the 572 idea.BTW Welcome to the board.

Re: New forum member from Canada
 

Welcome from Saskatchewan!

Re: New forum member from Canada
 

:welcome2: From West TN :hi2:

Re: New forum member from Canada
 

Welcome from Texas

Re: New forum member from Canada
 

Welcome to the board!

Re: New forum member from Canada
 

Thanks for the greetings guys, this looks like a great board. So much sharing of information, I love it!

Jim

Re: New forum member from Canada
 

Great to see some more Canadians joining. You'll love the extend a cab when you do it.

Re: New forum member from Canada
 

Welcome from another Manitoban!

Re: New forum member from Canada
 

Hey Karl, I was wondering if there were other Manitoban's here.

Re: New forum member from Canada
 

Welcome from southern oregon..

Re: New forum member from Canada
 

:welcome2: To The Boards From Brian Of Olds...Alberta, Canada.

Re: New forum member from Canada
 

Welcome from near Edmonton, Alberta!

I'd do the 5.3 swap myself! Lots more power, and milage similar to a 6.2!

Re: New forum member from Canada
 

There's an irrepairable 03 GMC with a 5.3 that I'm going to bid on. It has 39,000 KM.

Re: New forum member from Canada
 

Have you looked into what all is involved yet? If not, you may not quite be prepared for the costs associated, though those engines are right sweet when you get them running!

Re: New forum member from Canada
 

welcome from Lloydminster!Keep us posted on progress.

Re: New forum member from Canada
 

If I had a complete donor vehicle, would I not have everything I require other than engine and tranny mounts?

Re: New forum member from Canada
 

You'll need to have the harness re-worked, and both the PCM and the BCM flashed. If you're up to it, you can do the harness yourself, but it is a lot of work. The PCM / BCM you're basically forced to get done aftermarket.

Again, Ryan can do both, and also give you a much better understanding of what is involved than I can. To this point, I've stuck with the far simpler TBI and TPI systems, lol

Re: New forum member from Canada
 

Cool, thanks... What is Ryan's site name?

Thanks...Jim

Re: New forum member from Canada
 

Welcome to the board from West Tennessee. Good luck with your project.

Re: New forum member from Canada
 

welcome from san antonio texas.

Re: New forum member from Canada
 

Welcome from FT Worth

Re: New forum member from Canada
 

:welcoem:

Re: New forum member from Canada
 

welcome from bc and good luck with your project i'm just in the final stages of putting an 04 5.3L in my 78 stepside, if you have any questions let me know

Re: New forum member from Canada
 

:welcome2: from MN.

Re: New forum member from Canada
 

welcome fello canook...lol

Re: New forum member from Canada
 

hi and welcome from south florida. how about a 502, that wud b different!