Burb Int shots?
 

Been looking through the burb section here for a couple hrs... so far I haven't seen a thread like this.... link me if I am wrong....
Lets see photos of the inside of your wagons... stock, lightly modified... total customs, junkers show queens.... let me see them, and educate me on them. About all i really know ...
from the back of the front seat on forward, it's the same as a truck.
up to 2 seats avalible
3 doors are NOT rare. :haha:
plywood floors past the second seat


That's about it.
:metal:

Re: Burb Int shots?
 

Here some of mine rear Diamond plate panels,that's All I have right now of the inside,So I hear your maybe gonna be a burb owner is it 2x or 4x.Hope everything goes good for ya.Attachment 292948

Attachment 292949

Attachment 292950

Re: Burb Int shots?
 

I personally think a sub offers you more creative freedom than a pickup. You don't need any rear seats or you can have up to 4 rows, like I have sitting in mine now.

You don't have to run plywood, what about a metal floor from a pickup or even a nice bed wood floor with stainless strips (this is what I'm planning).

When it comes to headliners, you can go stock, or I've seen them covered with elaboarate wall papper or just some foam headliner material.

There's more room for amps, speakers and subwoofers if that's your thing.

Or how some jump seats mounted to the side? Kinda like the land rover series III used to have.

I wish you luck. My guess is you already have a Vision.

Re: Burb Int shots?
 

Hmmm, never thpought of the diamond plate... that could be interesting. Looks nice too.

I don't already have a plan... not for the inside anyways. I'll know when i see it though. I kinda like stock, with some flair. Even though the plans *dreams* for the body and suspention won't be stock. :confused:
Here's the thread ;
http://67-72chevytrucks.com/vboard/s...d.php?t=254669
Here's the trucks;
http://67-72chevytrucks.com/vboard/a...1&d=1187573593
http://67-72chevytrucks.com/vboard/a...1&d=1187573601
http://67-72chevytrucks.com/vboard/a...1&d=1187573610
72 C/20 402/Th400 front and rear A/C mangled passengerr front door, miminal rust.
The red white and blue one, is 1/2 ton p[arts, a passenger door, maybe barn doors upon inspecting them, it'll have a nice 68 nose in the back, and the rest will be parts and or crush weight.

Re: Burb Int shots?
 

Looks like you have one burb and one crew cab project there. I would slam the burb to the ground and use the blue parts burb for a crew cab convertion. I dotn have any sats at all in my burb write now noth just an empty shell. but I did pic up a set ouf bucket seats from a scout now I just need to find one more matching set so I can have 2 rows of bucket seats and one bench. I was going to do the dimond plate in the back but Im not sure now if thats what Ill do. Frizzle has a cool set up with the wood panneling.

Re: Burb Int shots?
 

New project Longhornman, that fist yellow burb looks like a great starter. Wish I could find one when I had the money...

Re: Burb Int shots?
 

Only interior pictures I have, good topic though,.. I like the simplicity of it. mine is all stock now, If I do anything it will probably be buddy buckets, or a recover of original benches, seat covers that are on it now cover worn out original cloth.

So far all I have done is put a 25 cent plasitic coffee cup counsel on floor and a fishermans green floppy hat on dash to cover a crack.

I think the room in the back is Awsome.

p.s everything I have just said may go out the window if I keep looking at pics of other Members rides and get a wild hair idea. ... life is good,kent

Re: Burb Int shots?
 

Ill get you some better shots of Ocrah Burbfrey (yes I know thats not the correct spelling, but I like it ) by the weekend.

Mark

Re: Burb Int shots?
 

Hope you get em. If you break down in my neck of the woods I'd lend a hand. If you've been surfin the burb forum you've probably already seen it, but here's a link to what I did in mine before it went all "Tahoe" on me ;)

...and here's some inspiration for ya:

Re: Burb Int shots?
 

more

Re: Burb Int shots?
 

I know that last one... a guy who owns a dealership here in town owns it. I got a butt load of photos I've been meanin to post since before the board meet.


Thanks for the pics... keep them coming.

Re: Burb Int shots?
 

How about this.......JK. These are the seats going in mine. You might want to check this link out also. I'm sure some of it will apply.

http://67-72chevytrucks.com/vboard/s...d.php?t=200387

Rob

Re: Burb Int shots?
 

Nice burbs Longhorn. Where did you find such nice steel in ohio?

My sub has some kind of van conversion seats in the front. They are kind of 70's chick. The rear seat is a fold down version from a 73+ burb.

Aaron

Re: Burb Int shots?
 

I have to fly to washington and drive/drag them 2500 miles home.
I found them on www.67-72chevytrucks.com ;)

Re: Burb Int shots?
 

WOW HART! I love that seating package!! That is gonna be sweet!

Re: Burb Int shots?
 

I gotta say, this floor is AWSOME!
http://67-72chevytrucks.com/vboard/a...1&d=1187973089

Does the wood floor support the weight of the bodylike the wooden bed floor in a trucks does?

Re: Burb Int shots?
 

I know, it's nice huh? That's my plan, but with chrome strips. One cross-sill is supported by the frame on rubber body mounts (the one with all the square wood chunks in these pics):
http://s6.photobucket.com/albums/y23...1583Medium.jpg

http://i6.photobucket.com/albums/y23...g?t=1178508482

The one in front of that, between the wheel tubs is floating. But, those are not an integral part of the body structure. I know because I've driven around without them for months :rolleyes:

One thing to consider however is that you need the floor to seal up as well as possible, unlike a truck bed. So I plan to either lay the wood on top of sheetmetal, or just seal the backside with an undercoating/bedliner type product after install.

Re: Burb Int shots?
 

good info, thank you.

Re: Burb Int shots?
 

Here is one of a plain Jane interior kind of dog proof.

Re: Burb Int shots?
 

That's a real nice, clean look, OI.

That wood bed is super sweet. What species is it?

Re: Burb Int shots?
 

Andy,

Let me be the 1st in Line to Buy That Burb Carcus before u Would Have it Crushed................


Thanks, Rick

Re: Burb Int shots?
 

Sure thing chief. There won't be much on it, but there will be a burb body and a full frame. I'll need to blow that sucker apart with the quickness too, so it'll be somewhat soonish. (before the snow flies)
There is a title for it too I'm told. :)

Re: Burb Int shots?
 

Im still looking for it :crazy:

Re: Burb Int shots?
 

Thanks Andy,

I just would'nt want to see it go to Crusher..............:lol:

Rick

Re: Burb Int shots?
 

LOL! I know you are man.

Re: Burb Int shots?
 

Just wondering if you got more Pics of the Burb Yet.................

We are all dying to see them:lol: :lol: :lol:

Thanks, Rick

Re: Burb Int shots?
 

Sent em all off to Longhorn Man via email. They are way to big to post here.

Re: Burb Int shots?
 

I'll see if I can resize them here shortly. It's nothing awsome, but not too awful shaby.

Re: Burb Int shots?
 

This comp is totally p!ssin me off. I've been tryin for a couple hrs now to resize the pics. This is why I haven't been posting any pictures for the last year or so... nothing new anyways. Every once in a while, i can get one to resize small enough to fit the 100 KB size, yet still be big enough to view... but the whole 642 max width... I go to that size, and the pic is still 300+ KB. has me so totally bent outta shape i am ready to kick this POS through the window and pee on it.
This is about how small it needs to be in order for me tpo be able to post it. Doin the same thing I've been doin for years, same program, just won't work right. :Own:
You can see, that for all practical purposes, that pic is not gonna do you any good.

I'm turning this thing off before I break something, stupid thing has locked up on me 4 times while trying to resize these photos.

Re: Burb Int shots?
 

Hey Andy,
Thanks for Trying on the Pic's, It's Really no Big Deal. Have you Got a Photo bucket Account? You can resize the Pic's when you upload to your account there if you Have one...............

It's Free, Rick

Re: Burb Int shots?
 

LOL...Here lemme help you.

Re: Burb Int shots?
 

Nice to See it has 2 Spare Tire's in it, That might be Good Insurance considering the Distance you will be Travelling. Have you Figured out your Emergency Tool Kit Yet, Going to Try Taking Thing's with you or Ship out ??

Good Luck , Rick

Re: Burb Int shots?
 

I'll actually have 6 spares!
I haven't quite decided...I'm still thinkin of sending a box out there via DHL... but I'm kinda considering just getting some cheap POS tools... the kind you can leave at a road side rest and say Oh Well.

Re: Burb Int shots?
 

I would send the Box out, You would Have enough Time to Think about what to Ship & Would Probably have Better Tool's to work with if & when Needed.

If you wait till you get Out There to do it you will be of a Different Mindset & May Overlook Thing's that may be Needed, Beside that you would be Burning Daylight having to Take Care of that once you Get There.............:lol: :lol: :lol:

Just Food For Thought, Rick

Re: Burb Int shots?
 

main drawback, I use those tools for work. :(

Re: Burb Int shots?
 

LHM,

Two things you may already know about image resizing, but I'll throw out there for everyone:

#1 If you have XP get the XP Powertoy Resizer Works like a champ

#2 Be sure you are saving the image as a .jpg instead of a .bmp (change file type when using "save as")

Re: Burb Int shots?
 

need to look into #1... #2 I know about, and I played around with all the others to see if they'd work, but nothing did.
Thanks for the info and the link.

Re: Burb Int shots?
 

Something to consider, Longhorn...the *resolution* of the picture will affect the file size as much as the physical size...you can take virtually *any* picture at around 600x450 physical size @ 72dpi and get it well under 100kb...some programs you can also compress them when you save them...

Frizzle: never seen that before! I'll have it remember that the next time I get a similar question over on Yenko.net...I take it for granted that not everyone has a plethora of graphics programs! LOL!!

Re: Burb Int shots?
 

frizz, I was wondering about the second pic you posted of the int. shots. I have the same seats that I am putting in mine and am having a hard time creating enough room between the front and rear seats. Just wondering if you or who ever the burb belongs to have some tips.