The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   Misc B.S. for sale (Colo) (https://67-72chevytrucks.com/vboard/showthread.php?t=257718)

glock35ipsc 09-10-2007 11:30 AM

Misc B.S. for sale (Colo)
 
4 Attachment(s)
Here are a bunch of extra stuff I came across while cleaning the shop this weekend. Everything here is good stuff for drivers, no show stuff here. Well, except maybe for the pulleys, the A/C controller, and the drive shaft. All parts are $$ plus shipping. Please post your interest in this thread, along with City and ZIP Code for a shipping quote.

** Vintage Air standard A/C controller, new - $50
** A/C dash center section. Looks bad in the pic, but it is a couple years of dust on it. It's in real good shape, see the second pic where the ash tray part is bent. Will straighten up easily - $10
** A/C vent center housing - $5
** Ash tray, excellent condition! SOLD!!!!

glock35ipsc 09-10-2007 11:34 AM

Re: Misc B.S. for sale (Colo)
 
3 Attachment(s)
** Battery tray, SOLD!!!!
** Beauty rings, 15". SOLD!!!!
** Carrier bearing, new, Car Quest part number 35-6036 - $10
** Dash bezel, in great shape, but was painted silver. Could be cleaned up, no cracks - $5
** Distributor and coil, tight, lobes are sharp - $20

glock35ipsc 09-10-2007 11:38 AM

Re: Misc B.S. for sale (Colo)
 
4 Attachment(s)
** Head light trim rings, 67-68 Chevy, good for a driver, one has some dings. See second pic - **SOLD**
** Various lenses. Tail light lenses look to have cracked, and have been superglued? Front turn lenses are for a 67-68. Good lenses for a driver - $15 for all
** Lower pulley, single groove, aluminum. Not sure what all it will work on - **SOLD**

glock35ipsc 09-10-2007 11:43 AM

Re: Misc B.S. for sale (Colo)
 
4 Attachment(s)
** Rear drive shaft. This is a NEW rear section for a 2-piece drive shaft, made for lowered LWB trucks. The front yoke is a captured slip yoke with about 3" - 4" of travel. No more trashed carrier bearings! New, with new u-joints, never installed - $125
** Spring perches, NEW, Moroso for leaf springs, 3" axle tube (no picture yet) - $10
** Steering column lower cover plate - SOLD!!!!
** Short water pump pulley, chrome, single groove, as new except for the dust - $5

glock35ipsc 09-10-2007 11:45 AM

Re: Misc B.S. for sale (Colo)
 
2 Attachment(s)
** Fleetside tailgate trunions, good contition, not worn out - **SOLD**
** Set of wing windows, great glass, include rebuild kit (felts and rubbers), both sides - $100 set, will not seperate

Alberta Newbie 09-10-2007 01:15 PM

Re: Misc B.S. for sale (Colo)
 
How much to ship the battery tray and ash tray to Edmonton, Alberta, Canada ?

glock35ipsc 09-10-2007 01:21 PM

Re: Misc B.S. for sale (Colo)
 
Get me your postal code, and I will weight it tonight and figure out the most economical way to get it there.

Bamm 09-10-2007 01:58 PM

Re: Misc B.S. for sale (Colo)
 
2nd in line for the battery tray Bob, Thanks, .......Jerry

Alberta Newbie 09-10-2007 02:02 PM

Re: Misc B.S. for sale (Colo)
 
My Postal Code is T8A 5V5

lks dcvn 09-10-2007 02:11 PM

Re: Misc B.S. for sale (Colo)
 
** Steering column lower cover plate - $3

I will take it - please PM a total with shipping (to 43615) and I can get you the $ ASAP.

Thanks!

Bob Moore 09-10-2007 02:24 PM

Re: Misc B.S. for sale (Colo)
 
Interested in the trim rings. Shipped to Tacoma, WA 98407. Can do Paypal.

Thanks - Bob

meathead95 09-10-2007 03:44 PM

Re: Misc B.S. for sale (Colo)
 
ill get in line for the battery tray

Alberta Newbie 09-11-2007 02:21 PM

Re: Misc B.S. for sale (Colo)
 
ttt

glock35ipsc 09-11-2007 03:16 PM

Re: Misc B.S. for sale (Colo)
 
Jerry - I got you down as #3 for the battery tray.
lks dcvn - I will get the figure tonight and let you know tomorrow.
Bob Moore - ^^ Ditto ^^
meathead - Got you down as #2 for the battery tray.

glock35ipsc 09-12-2007 11:10 AM

Re: Misc B.S. for sale (Colo)
 
PM's sent to those looking for shipping costs.

glock35ipsc 09-14-2007 01:27 PM

Re: Misc B.S. for sale (Colo)
 
ttt, all parts that have been paid for have shipped!

glock35ipsc 09-22-2008 01:19 PM

Re: Misc B.S. for sale (Colo)
 
Bump, still have some of this stuff.

jamie72 09-22-2008 03:54 PM

Re: Misc B.S. for sale (Colo)
 
how much on the chrome pully to 47224?

glock35ipsc 09-23-2008 09:03 AM

Re: Misc B.S. for sale (Colo)
 
Jamie - Sent you a PM.

71cadc10 10-21-2008 11:51 AM

Re: Misc B.S. for sale (Colo)
 
that rear drive shaft piece, you think it can withstand some off/on racing at the strip, with drag radials? Or is a 'street only' type piece?
thanks

glock35ipsc 10-21-2008 12:23 PM

Re: Misc B.S. for sale (Colo)
 
It's a pretty solid unit, I would probably run it without question. I fully intended to do some Friday night Street ET racing at Bandimere until my truck got hit. Never got the chance to install it though. Dang drunks! :banghead:

Jamie - Did you ever get the PM I sent you? I never heard back from you.

72BlckButy 10-21-2008 02:04 PM

Re: Misc B.S. for sale (Colo)
 
How's the chrome on the vent windows?

glock35ipsc 10-21-2008 02:13 PM

Re: Misc B.S. for sale (Colo)
 
Pretty good from what I remember, it's been awhile since I opened the box. I'll look again tomorrow, I won't be home until way late tonight.

72BlckButy 10-21-2008 02:30 PM

Re: Misc B.S. for sale (Colo)
 
That's okay, if you can get some pics when you get a chance that would be great. These are original pieces correct?

olblue60@aol.com 10-22-2008 08:32 AM

Re: Misc B.S. for sale (Colo)
 
I'm interested in the drive shaft. Could I get a couple of measurements, say center to center of the U joints, compressed mand extended? thanks.

va_tlc 10-22-2008 08:40 AM

Re: Misc B.S. for sale (Colo)
 
thats a heck of a good price on the driveshaft,

glock35ipsc 10-22-2008 08:46 AM

Re: Misc B.S. for sale (Colo)
 
Nate - I'll have to get those pics tonight. I got home pretty late last night and went right to bed! And yes, they are the original ones off of my 68.

I'll get the drive shaft measurements tonight. I bought this from Ricks Pickup Parts in 2004 for my 68 but never got the chance to use it since it got hit. They are built specifically for these trucks.

myoldchevytruck 10-22-2008 08:58 AM

Re: Misc B.S. for sale (Colo)
 
Bob,

On the tailgate trunions ($5.00). If you can get them in a USPS Priority Flat Rate Envelope for $4.95? I'll take em' for $10.00 Shipped. I can pay Pay Pal. Thanks.

olblue60@aol.com 10-22-2008 09:00 AM

Re: Misc B.S. for sale (Colo)
 
I'll take the carrier bearing if its still available?? zip is 20901

glock35ipsc 10-22-2008 09:05 AM

Re: Misc B.S. for sale (Colo)
 
Quote:

Originally Posted by myoldchevytruck (Post 2940802)
Bob,

On the tailgate trunions ($5.00). If you can get them in a USPS Priority Flat Rate Envelope for $4.95? I'll take em' for $10.00 Shipped. I can pay Pay Pal. Thanks.

It may take me a while to get to the PO to even get the envelope, probably Saturday at the earliest, but that sounds good to me.

Paypal is glock35ipsc -at- aim.com

Olblue - I'll get a weight on it tonight and let you know shipping.

olblue60@aol.com 10-22-2008 09:07 AM

Re: Misc B.S. for sale (Colo)
 
Thanks!

John

myoldchevytruck 10-22-2008 09:10 AM

Re: Misc B.S. for sale (Colo)
 
Bob,

Thanks. Saturday will be fine. Sending payment now.

72BlckButy 10-22-2008 12:48 PM

Re: Misc B.S. for sale (Colo)
 
Quote:

Originally Posted by glock35ipsc (Post 2940794)
Nate - I'll have to get those pics tonight. I got home pretty late last night and went right to bed! And yes, they are the original ones off of my 68.

glock, if I'm not mistaken, is it the '72 vent windows have an extra screw attachment for the door, is that right? If so, I will have to pass.... I know that the '72 doors have an extra screw the other years don't have.

Thanks for the extra effort!

70rs/ss 10-22-2008 05:35 PM

Re: Misc B.S. for sale (Colo)
 
bezels and the aluminum pulley? 86042 if ups/fedex

glock35ipsc 10-22-2008 05:44 PM

Re: Misc B.S. for sale (Colo)
 
Quote:

Originally Posted by 70rs/ss (Post 2941482)
bezels and the aluminum pulley? 86042 if ups/fedex

I'll gather them tonight and PM you tomorrow.

Nate - I'm not that familiar with the 72 doors, but I thought the bolt/screw just went from the inside skin to the outside skin to pull them together. I'm not sure if it passes through the vent frame or not.

olblue60@aol.com 10-24-2008 07:30 AM

Re: Misc B.S. for sale (Colo)
 
I was hoping to get the info from you so that I could send payment before I left for the weekend. I'll check back just before I leave. If there isnt anything , I'll check it when I get home Sunday P.M.

John

glock35ipsc 10-24-2008 08:59 AM

Re: Misc B.S. for sale (Colo)
 
PM's sent to 70rs/ss and olblue60.

67ChevyRedneck 10-24-2008 10:35 AM

Re: Misc B.S. for sale (Colo)
 
Screw doesn't go through the wing window...

http://67-72chevytrucks.com/vboard/a...1&d=1210901174

glock35ipsc 10-24-2008 11:57 AM

Re: Misc B.S. for sale (Colo)
 
Quote:

Originally Posted by 72BlckButy (Post 2941075)
glock, if I'm not mistaken, is it the '72 vent windows have an extra screw attachment for the door, is that right? If so, I will have to pass.... I know that the '72 doors have an extra screw the other years don't have.

Thanks for the extra effort!

Thanks for that pic!

I looked at them again, and it's obvious that it has been almost 5 years since I looked at them. The chrome on the outside is gone, if there ever was any. They are black, and kinda rough. So they might not have been chrome to begin with.

72BlckButy 10-24-2008 11:10 PM

Re: Misc B.S. for sale (Colo)
 
Bob, thanks for all your help, but I think I'm going to pass on the vent windows at this time.

Good luck with the sale!

ttt...


All times are GMT -4. The time now is 08:37 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com