Junkyard Pics today
 

There's a place just down the road that has acres of junked equipment and they started cleaning up because the EPA is on their case. They pulled these three duallies out of the weeds and were getting ready to cut them up. These were the old man's work trucks. I'd say he got his money's worth, they're pretty trashed.

http://farm3.static.flickr.com/2215/...69e0d4bac5.jpg
http://farm3.static.flickr.com/2273/...70654d9ce0.jpg
http://farm3.static.flickr.com/2338/...7d63a5a052.jpg

I scored this rear seat and side glass from an '85. My foam is toast and this one looks identical to a front seat except the brackets which I won't need. My windows are also scratched. I think this is a pretty good score considering new foam cost what like $250?

http://farm3.static.flickr.com/2132/...d8844fdabb.jpg

They also had this 8-lug longbed stepside:

http://farm3.static.flickr.com/2205/...140494c8ed.jpg

The guy's Lab got hit while I was there and was probably going to be put down so I couldn't settle up. Bad deal. I'll go back tomorrow, but he probably won't take much if anything. I think the foam is a good score considering the cost of new seat foam at $250 plus shipping. Should I go back and get the rear slider, is that worth anything?

Hopefully you guys like junyard pics as much as I do...

Re: Junkyard Pics today
 

I see at least one Dana 60 front axle. Better get all of them you can!

Re: Junkyard Pics today
 

Any crew cab,1 ton single rear wheel, or dually 4wds??If they are grab them front axles while you can.They are worth around 800-thousand a piece on average.

Re: Junkyard Pics today
 

prolly a ton of small things on them still usable too grab all you can while you can im sure you could sell a bunch on here the sliders are always good to have i wouldnt have a truck without one

Re: Junkyard Pics today
 

$1000 for a Dana 60 front???? How do I identify one, is it just assumed on the 1-ton 4wd? I'll be going back tomorrow, and the slider is on the list too.

Re: Junkyard Pics today
 

They were found on one ton 4wds.Dually,or single rear wheel.Here is a pic of one to ID it.It won't be as round as the 10 bolts that would be on the 1/2 or 3/4 tons.It will only have 3 u bolts-That's the way to tell

Re: Junkyard Pics today
 

The Dana 60 front will have a 60F casting to the lower right of the cover. I agree grab any parts that are good like radio knobs, window cranks, cab lights, glovebox doors, etc.

Re: Junkyard Pics today
 

I don’t see any Dana 60 front axles :crazy:

The trucks all look like 2wd's to me.

Re: Junkyard Pics today
 

if the long stepper bed is in fairly good condition, me thinks tis worth saving too - from what I've seen those ain't too common at all, so it will make for a cool mod for a regular longbed truck.

Re: Junkyard Pics today
 

They are not worth that. Maybe purchasing and shipped to the other side of the world. MAYBE.

Re: Junkyard Pics today
 

The inside of the stepper looks like this, I think it's pretty much a gonner:
http://farm3.static.flickr.com/2202/...02a8454fe6.jpg
DirtyLarry, the white crew and stepside both have 1-ton 4wd front axles. I think I'm gonna try to do a little bartering with this guy and see what he'll do if I can bring him a buyer for the axles. He has three 60-100 gallon compressors he pulled from a plant and he set aside an 80 gallon with a single phase motor for me, I'll try and get that free. I'd be happy if he makes some money because after all it's his crap and his dog either got put to sleep last night or will be undergoing expensive surgery. He's gonna need the dough if that's the case.
Morgsie, I did a little checking and these axles are going for 800-1200 unrestored and up to 2800 all done.

Re: Junkyard Pics today
 

I was thinking the same thing... particularly if its a wood floor that could be restored to look real nice

Re: Junkyard Pics today
 

Check ebay,craigslist,pirate4x4,etc.They sell for upwards of $1000 every day of the week.Sometimes you can get them for less if you search,and dually styles usually go for less than the SRW (single rear wheel style) but they are still expensive.

Re: Junkyard Pics today
 

Well considering I read pirate4x4 on daily basis, I STILL don't believe you. For $1000 you should be able to get the dana60 front + the matching 14 bolt rear.

Re: Junkyard Pics today
 

Go to sleezebay right now and you will find Dana 60's going for $700 to $1100, If LEEVON can pick these up for a couple hundred that's a good profit margin.

Re: Junkyard Pics today
 

$1,225 and the reserve wasn't met.

It even says in his ad, "Why pay $1000 for an axle and still have to rebuild it". That means they are worth $1000 used. Granted, there are some on ebay go for less, but they're also sold "B.I.N." in minutes because people know it's a steal at anything less than $500.

Re: Junkyard Pics today
 

I find it funny that all the dana 60 ..... on ebay is FORD. And this is a Chevy forum. AND A FORD DANA WON'T FIT A CHEVY. AND CHEVY 60S ARE CHEAPER BECAUSE THERE IS WAY MORE OF THEM. Do some research .....
And since when has ebay EVER been a good judge to base prices on?

Re: Junkyard Pics today
 

If he can pick them up for a few hundred he can sell them reasonably priced and still make money.Location makes pricing different but they are still around 1k for SRW Dana 60 on average.The dually style usually are a few hundred less.BTW,there is several people on the board with Ford Dana 60s under their Chevy trucks.Especially if doing a SFA swap on their 88+ and want to use their stock transfer case.VTBlazer has a h.p. 60 under his Gen 1 K5 too.Chevy dana 60s have sold on here for $1200.Maybe they are cheaper up there? I don't know.I wish they were cheap here,I could use one or two for my 4wds :)

Re: Junkyard Pics today
 

Put me down for a half dozen, This looks like it could be a good money maker.

Re: Junkyard Pics today
 

Somehow I don't think the personal attacks are necessary.

Welcome as the first person on my ignore list. And yes, the post has been reported. In case you hadn't noticed, we generally operate around here with a little sense of tact and diplomacy. This ain't no ricer forum.


And it's finding out that you're from my home province that makes me embarrassed to admit it. And finding out that I've owned and been working on these trucks since before you were born is a little depressing as well..... :hm:

Re: Junkyard Pics today
 

Reported 2x for language and attitude. This is a cool forum where we can DISAGREE without making it personal.

Re: Junkyard Pics today
 

I agree - not my cup of tea but even in lousy shape it looks like a keeper for someone!

Re: Junkyard Pics today
 

Post has been reported several times over. Please refrain from showing your butt in replies... thanks

Re: Junkyard Pics today
 

:)

Re: Junkyard Pics today
 

Thanks N2, that was quick!! ;)

Re: Junkyard Pics today
 

It helps us all when forum members report that a post has gone bad. As much as the forum staff tries to ensure the harmony here, it's impossible to catch them all.

Thanks for the reported post guys. Lets hope that this thread can get back on subject again...:)

Re: Junkyard Pics today
 

I'd grab the bed and bed mounts/supports off the longbed stepside. It's rare and I think they are pretty cool.

Re: Junkyard Pics today
 

you may want to take your own advice and do some research.

a Ford Dana 60 WILL fit in a Chevy. my Chevy has one. spring perches are identically spaced.