68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

I'm finally parting with my 68, I sold the engine last summer after the tranny went out and I didn't have the money to fix it and I didn't want the motor to seize up. Anyways. I sold the seats, and all of the motor minus the exhaust(flowmaster super 40's with dynomax ceramic headers), block, crank and heads. Thought I might throw it back together one day but I have too many projects.

*New interior, all from LMC
*Original A/C Cab, have all A/C components but I stripped them out so not sure if they work
*Dana 60 rear w/ Detroit Locker, 3.54 gears
*TH-400 tranny, needs rebuilt
*Classic Performance Products Front Disc conversion, stainless lines, drilled/slotted rotors, 2.5 drop spindles
*No wood bed, tore out with intentions to replace, never got to it

I know there's alot I'm forgetting but if you have any questions just ask.

$2750obo

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Hello, I am looking for BB a/c brackets and compressor. I also need the water pump pulley, would you hapen to still have these? Greg

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Interested in entire interior, seats, door panels, visors.

Just saw where seats not for sale, never mind!

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

How much is it all worth to you?

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

I'd like to sell it all as one piece if I could, if not then I will part out and give everyone individual prices

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Is it a leaf spring rear end? If so, and you decide to part it, let me know

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

How much rust might be interested in the whole thing.

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Very little rust, one quarter sized spot on the hood which is surface rust, the front of the hood where the trim goes is cancerous rust, barely noticeable. scratches down the bed that have surface rust and a spot over the rear wheel well that has a patch welded in (probably 2x4"). The bottom of the doors are beginning to bubble through the paint in places. The only real cancerous rust is on the front of the hood and the door bottoms, I can post pictures later if wanted.

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

It is a leaf spring rear end.

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

If you part it out, I'm interested in all four marker lights, the door handles and the outside mirrors with all brackets and hardware.

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Okay, so I've started a list if no one ends up buying it whole anytime soon. I'm doing the list in order of reply's of course so to be fair

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Hello I would like the front grill along with all the chrome trim pieces including the lights. I would also like the gauges let me know thanks

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Forgot I would also like the heater controls

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

I'd be interested in the column if its tilt, and maybe some more parts for my 72 chevy show truck, they must be really nice. I do need alot of stuff at this time. let me know. Or you can call me at 832-347-3727

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

If it has a black headliner and chrome Id like that.

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Lucky--heater controls are heater and A/C, not sure if you're wanting just the heater controls or not, everything else is duely noted

to--non-tilt column, sorry, pm me with what you're looking for on the 72

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

jwn--no headliner, sorry

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

headers. price? pics? thanks

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

How bad is the bottom of the pass. door? If you separate it all for parts would you consider selling the body moldings and would you ship the door? Thanks.

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Ami-noted on the pass. door, I'll shoot you some pics if I part it out

68350-someone else has already spoken for the headers but you're #2 on the list. The collectors have no flanges to bolt to as I welded them directly to the exhaust. Easy fix to weld on new flanges. I would take $100 bucks for them. If the other guy falls through I'll shoot you pics. Good shape with the normal scratches from use.

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Any rust on the passenger fender? I am interested if it is rust free.

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

I will take more extensive pictures tomorrow and pictures of everything people have asked about.

Jonathan

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

put me in line for the grill and trim for grill also the filler panel between the grill and hood please

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

darn iam #3 on the grilll HUGH

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

So, here is some more info.

Some major things I forgot,
*complete painless wiring kit
*brake booster off of an '82 s-10, small design to clear tall valve covers
*extra set of stock height spindles also from Classic Performance Parts
*new plastic style heater/ac hoses, some installed, some not


Only things needed to make the truck run, seats, rocker arms, cam/lifters/pushrods, intake/carb and an oil pump, motor put back in and the tranny will also need to be rebuilt as all it had when I pulled the engine was 1st and reverse.

The body is in decent shape, various dents/dings, quite a few scratches but no cancerous rust other than hood and door bottoms.

if you would like more pics email me and I'll send them to you.

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

is the wiring harnass installed? or in a box?

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Wiring harness is installed

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Just thought I would let you know. I am interested and do need that leaf spring rear end. I live approx. 3 hours from you.

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

buffle--are you interested in the whole truck or just the dana??

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Wish I had room, but the dana is what I am really interested in. Have you thought about a $

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Seriously interested in the underdash wiring harness if you part it. zip 63628. Thanks

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

buffle--I'll think up a price for just the dana, I'd really rather not take it out unless I absolutely have to since I will have to replace it with something else to keep the truck rolling.

sammy--got you noted for the painless kit

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

buffle--if I end up parting it I'll take $600 for the dana
detroit locker, new bearings ~2 years ago, 3.54 gears

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Is it 5 on 5 or 6 lug? If 5 on 5 how soon do u want do this? I am in no hurry my 3/4 ton is fine until i get all the conversion parts.

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Let me know on the grill if the others pass I am just up the road from ya

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

buffle--it's a 6 lug

ksjh--got you in line for the grill

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

I guess I will keep looking, need 5 on 5.

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

sorry about that buffle, good luck finding one

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

How are the guages... I am interested in that.... I wish I could buy the whole truck from you but being a College student isn't the best occupation to be buying new trucks.

:metal:

Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS
 

Michael--I understand about the college thing, same reason I'm selling since I'm currently at K-State. Anyways, only stock gauge that works is the speedo, aftermarket tach, oil pres., vacuum, temp, gas gauge is there but was very sporadic