The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   parting 1972 cheyenne super 3/4 4x4 (https://67-72chevytrucks.com/vboard/showthread.php?t=307104)

dcdave 09-17-2008 12:08 PM

parting 1972 cheyenne super 3/4 4x4
 
I wrecked my 72 3/4 4x4 bent frame It was a 2 owner truck tilt tact a/c dealer installed winch auto 205 no spin 410 rear big hub front extream hooks only the engine is sold 550 on tranny transfer 550 on hooks 350 on winch I have another frame from a 72 I have a clean 72 air cab factory black I was going to restore but money is tight i'm in vancouver washington

jay_shy 09-17-2008 12:11 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
PM sent

jay_shy 09-17-2008 12:13 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
Noticed you don't have PM so an email is on the way

Jason

gcburdic 09-17-2008 12:19 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
Is the tilt column coulumn or floor shift? How much for the tilt column? how much for the tach dash?

swb72chev 09-17-2008 12:25 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
are you parting everything ?

JQ-72 09-17-2008 12:30 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
Interested in glovebox door and vehicle identification plate if you are willing to sell. Thanks.
Joshua

dcdave 09-17-2008 12:44 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
the tilt is a colum shift

dcdave 09-17-2008 12:46 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
250.00 on the tilt the tact is also 250.00

CPNE 09-17-2008 12:53 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
front ebrake cable?

Locking hubs (if OE blue center)?

gn4u2c2 09-17-2008 12:56 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
pics of lockouts, door mirrors. does it have a toolbox in the bed side ?? if so I am interested in that also.

swb72chev 09-17-2008 12:58 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
core support , tailgate, mirrors , door handles outer, headliner and trim ring,?

dcdave 09-17-2008 01:00 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
No it doesn't have atool door I'm trying to add pic's it does have blue hubs that work it has e-brake cable 25.00 on cable

Batman 09-17-2008 01:04 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
Do you happen to have the hard tubes for the condenser to compressor line and evaporator line to drier? Should be the ones that come out just under the battery tray.

dcdave 09-17-2008 01:08 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
core support junk tailgate junk mirror are three prong handles are good headlinertrim

dcdave 09-17-2008 01:12 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
I have the line in repo mine are not good I've had them for a yror so still in pacage 30.00 shipprd

badpeanut 09-17-2008 01:15 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
Passenger side front bumper bracket?

CPNE 09-17-2008 01:21 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
Quote:

Originally Posted by dcdave (Post 2893739)
No it doesn't have atool door I'm trying to add pic's it does have blue hubs that work it has e-brake cable 25.00 on cable


I'd be interested in the ebrake cable at that price if it can be removed with the finger prongs that hold it to the frame bracket intact. New is $75 so working used @$25 is fair. Will take OE lockouts pending pic and price.

jkaylor68gmc 09-17-2008 01:22 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
how about door panels?

dcdave 09-17-2008 01:48 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
door panel are white I'll send pic's

468BIGBLOCK 09-17-2008 02:35 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
I would like to be first inline if you have the factory hupcaps. Thanks!!

dcdave 09-17-2008 02:41 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
I have them there rough I'll send pic's

dcdave 09-17-2008 02:43 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
It has 9.75 slots on it right know there in good shape 33x12,50 16.50

dcdave 09-17-2008 02:46 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
i'd like 450.00 on the slots

DMARCUM123 09-17-2008 03:23 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
Put me inline on the colum pm let me know any pics

Mint68 09-17-2008 03:57 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
I would also be interested in the tilt, if it makes it to me. Just column or wheel included? Picks if it makes it this far.

gcburdic 09-17-2008 04:10 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
Quote:

Originally Posted by dcdave (Post 2893724)
250.00 on the tilt the tact is also 250.00

Hey dcdave....

I'll pass.....Thanks and good luck.....bump!!!

JQ-72 09-17-2008 04:30 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
Still waiting on reply to glovebox door. What color was the truck? Thanks.
JQ

bobvilla67 09-17-2008 04:59 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
transfer case shifter knob?

dcdave 09-17-2008 07:53 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
dmarcum123 e-mailme I'll send pic's it's 250 on the tilt

dcdave 09-17-2008 07:55 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
j-q 72
it is a seafoam truck crazy day trying to post pic's kicking my butt
bobvilla the transfer knob is 30 shipped

JQ-72 09-17-2008 08:15 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
So, how much for it? Thanks,
JQ

special-K 09-17-2008 09:06 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
What shape is the woodgrain dash bezel and glovebox applique in?

badpeanut 09-17-2008 10:13 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
Quote:

Originally Posted by badpeanut (Post 2893762)
Passenger side front bumper bracket?

Where is it wrecked? Are the front bumper brackets good?

DMARCUM123 09-17-2008 10:56 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
pm

Down south truckin 09-17-2008 11:05 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
I'd like to get in line for the front hubs and hubcaps pending price and pictures. Thanks Mike

muscletrucks 09-17-2008 11:06 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
Pics of the winch & hooks along with price please.

slicks garage 09-17-2008 11:23 PM

Re: parting 1972 cheyenne super 3/4 4x4
 
Can I be second in line for the door panels? How much?

w314speed 09-18-2008 04:59 AM

Re: parting 1972 cheyenne super 3/4 4x4
 
I'll go after Special K for the woodgrain dash and glove box applique. Pics and price?

CPNE 09-18-2008 09:08 AM

Re: parting 1972 cheyenne super 3/4 4x4
 
Quote:

Originally Posted by Down south truckin (Post 2894737)
I'd like to get in line for the front hubs and hubcaps pending price and pictures. Thanks Mike


You may be 3rd in line on locking hubs, I'm waiting pics and price from page 1, post #9.

Hopefully pics soon?

hdflstf 09-18-2008 09:37 AM

Re: parting 1972 cheyenne super 3/4 4x4
 
Looking for the e-brake cable brackets that attach to the frame.

Also curious about the under hood wiring harnesses and under dash harness.

Thx


All times are GMT -4. The time now is 09:22 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com