The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   Some stuff for sale (https://67-72chevytrucks.com/vboard/showthread.php?t=314014)

Redden05 11-10-2008 05:59 PM

Some stuff for sale
 
I have some things I want to get rid of.

1. A set of 6 cylinder 2WD motor mount stands: $10 plus shipping

http://i151.photobucket.com/albums/s...s/IMG_1714.jpg

2. A Edelbrock Intake for 86 and older SBC V8 that has been drilled to fit on newer small blocks. It also has a bolt broken off in it where the alternater bracket bolts on: SOLD

3. A 6 cylinder 3 speed manual tranny with the bellhousing and starter. This is the older kind with the mounts on the bellhousing. I also think the bellhousing is for a 4 speed manual as the hole where the shaft comes through is too big for the transmission. It worked nice when I took it out. Make me an offer. I dont want to ship this, but if you want the bellhousing and starter, I will take them off and sell them seperate. And I will ship the bellhousing/starter.

I will add more stuff as I find it. :hm:

Redden05 11-10-2008 06:31 PM

Re: Some stuff for sale
 
4. I have a inside wiring harness from a 6 cylinder truck without gauges. There are no wires cut, but the ignition plug has come apart. It also includes the engine harness in the engine bay, that has been cut. And also the harness that goes across the radiator support: $30 plus shipping

5. 1971 5 lug axles out of a coil spring truck. It is the axles only in very good shape: $40 plus shipping

6. A complete TBI setup with wires, throttle body, all sensors, intake, and anything else I thought was related to it. It was an 1987 C10 2WD 350 V8 700R4 transmission: $200 plus shipping.

I will get pictures if you request them. Thanks.

zooza1 11-10-2008 06:35 PM

Re: Some stuff for sale
 
put me in line for the intake... pending pictures send them to tomcat_37096@yahoo.com or post here

Redden05 11-10-2008 09:07 PM

Re: Some stuff for sale
 
If the prices are too high, make an offer.

7. I also have a nice spare tire holder. It comes with the screw part which is bent and needs straightened. See the pictures. $30 plus shipping.

http://i151.photobucket.com/albums/s...s/IMG_1723.jpg

http://i151.photobucket.com/albums/s...s/IMG_1722.jpg

Redden05 11-10-2008 09:13 PM

Re: Some stuff for sale
 
more pics:

I also found the other harness piece that goes to the firewall around the front to the battery and alternator. I will throw it in with the rest.
http://i151.photobucket.com/albums/s...s/IMG_1718.jpg

http://i151.photobucket.com/albums/s...s/IMG_1719.jpg

zooza1 11-10-2008 11:26 PM

Re: Some stuff for sale
 
i'll take the intake if shipping isnt crazy! its to 37096 linden, tn. do you take paypal?

Redden05 11-11-2008 07:26 PM

Re: Some stuff for sale
 
I will have to get a wieght on the intake before I get a quote. I will do it tomorrow morning. Yes I take Paypal.

zooza1 11-11-2008 09:48 PM

Re: Some stuff for sale
 
thanks i'm being patient no prob!

Redden05 11-12-2008 12:07 PM

Re: Some stuff for sale
 
It will be $15 to ship it to you zooza1 through FedEx.

Redden05 11-12-2008 02:28 PM

Re: Some stuff for sale
 
I was just looking at the Intake and one of the holes where it has been drilled out (you can see it in the 2nd picture) it is cracked. It will not hurt the operation of the intake, i just wanted to let you know.

Redden05 11-13-2008 04:42 PM

Re: Some stuff for sale
 
Intake is sold to zooza1.

Redden05 11-14-2008 05:12 PM

Re: Some stuff for sale
 
ttt

Redden05 11-17-2008 05:26 PM

Re: Some stuff for sale
 
bump

Redden05 11-19-2008 01:09 PM

Re: Some stuff for sale
 
bump

Redden05 11-20-2008 08:46 PM

Re: Some stuff for sale
 
make an offer!

rob32472 11-20-2008 08:49 PM

Re: Some stuff for sale
 
what is the length of the axiles? I want them if they are right length

Redden05 11-20-2008 10:47 PM

Re: Some stuff for sale
 
I will measure them tomorrow. Where do you want them measured from? Or just a total overall length?

Redden05 11-21-2008 07:23 PM

Re: Some stuff for sale
 
rob: PM sent

Redden05 11-24-2008 08:14 PM

Re: Some stuff for sale
 
ttt

Redden05 11-27-2008 06:07 PM

Re: Some stuff for sale
 
bump

Redden05 11-29-2008 08:08 PM

Re: Some stuff for sale
 
I will throw in, with the wiring harness, the wire harness that goes from the front to the rear of the truck for a shortbed. It has not been cut, it was just painted red.

Redden05 12-01-2008 10:07 PM

Re: Some stuff for sale
 
bump

Redden05 12-04-2008 08:34 PM

Re: Some stuff for sale
 
ttt

Redden05 12-10-2008 07:08 PM

Re: Some stuff for sale
 
bump

Redden05 12-12-2008 07:12 PM

Re: Some stuff for sale
 
ttt

70GMCer 12-12-2008 07:31 PM

Re: Some stuff for sale
 
How much for the spare tire mount?? Shipped to 21085

Redden05 12-12-2008 09:35 PM

Re: Some stuff for sale
 
How would $48 shipped sound?

70GMCer 12-13-2008 08:24 AM

Re: Some stuff for sale
 
Quote:

Originally Posted by Redden05 (Post 3024655)
How would $48 shipped sound?

Thanks...i'll pass

Redden05 12-15-2008 04:52 PM

Re: Some stuff for sale
 
ttt

Redden05 12-27-2008 06:00 PM

Re: Some stuff for sale
 
bump

Redden05 12-29-2008 06:38 PM

Re: Some stuff for sale
 
ttt

Redden05 01-08-2009 08:05 PM

Re: Some stuff for sale
 
bump

Redden05 01-13-2009 07:49 PM

Re: Some stuff for sale
 
ttt

Redden05 01-21-2009 12:15 AM

Re: Some stuff for sale
 
Make me an offer on this stuff.

ChillFactor 01-29-2009 05:23 PM

Re: Some stuff for sale
 
Did you get the distributor and coil with the TBI stuff? Maybe post a pic of the TBI pieces and parts, I may be interested.

Redden05 01-29-2009 05:40 PM

Re: Some stuff for sale
 
Umm, i believe I have the distributor. I would have to check. I will get some pictures tonight.

Redden05 01-29-2009 08:31 PM

Re: Some stuff for sale
 
Here are the pictures of the TBI stuff. I have the coil and distributor, but it has no cap and there is no plug wires except the coil wire.

http://i151.photobucket.com/albums/s...s/IMG_2245.jpg

I have the MAP sensor somewhere.
http://i151.photobucket.com/albums/s...s/IMG_2248.jpg

http://i151.photobucket.com/albums/s...s/IMG_2240.jpg

http://i151.photobucket.com/albums/s...s/IMG_2250.jpg

Knock Sensor and Oil gauge sender.
http://i151.photobucket.com/albums/s...s/IMG_2249.jpg

http://i151.photobucket.com/albums/s...s/IMG_2247.jpg

Front Wiring Harness. Headlights and such.
http://i151.photobucket.com/albums/s...s/IMG_2246.jpg

Redden05 01-29-2009 08:34 PM

Re: Some stuff for sale
 
Interior Wiring harness Pics:

http://i151.photobucket.com/albums/s...s/IMG_2241.jpg

http://i151.photobucket.com/albums/s...s/IMG_2242.jpg

Vehicle Speed Sensor
http://i151.photobucket.com/albums/s...s/IMG_2243.jpg

http://i151.photobucket.com/albums/s...s/IMG_2244.jpg

ChillFactor 01-30-2009 05:56 PM

Re: Some stuff for sale
 
I think I'll pass on the TBI stuff for now. Thanks for the pics.

BruceR 01-31-2009 07:39 AM

Re: Some stuff for sale
 
what is best price on wiring shipped to 75783 ?

thanks


All times are GMT -4. The time now is 09:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com