Need pics 60-66 (slammed not bagged)
 

Is there any pics of any 60-66 slammed not bagged, im looking to see how low you can go without the bags.

Re: Need pics 60-66 (slammed not bagged)
 

http://i686.photobucket.com/albums/v...10truck002.jpg

im honestly not sure what type of drop my truck is. but i know it doesn't have drop spindles.... and it sits that low. so you can do alot for a little bit of money!

Re: Need pics 60-66 (slammed not bagged)
 

Here mine jeep springs in rear and 1 1/2 coil wack in the front. Throw a couple 2x4's in the back and it drops abour 2" more.:lol:oh ya I cut the rubber stops off and the brackets that held them.

Re: Need pics 60-66 (slammed not bagged)
 

I haven't dropped the rear of mine yet, but the front has 3" drop springs, and I stepped the lower control arms 1-1/2". Total of 4-1/2" in front. The rear is going to have manual-fill airbags.

http://img11.imageshack.us/img11/7752/img0155adf.jpg

Re: Need pics 60-66 (slammed not bagged)
 

my 66 has a 4-6 drop on springs only and it still rides fine

http://i246.photobucket.com/albums/g...ck66/120-1.jpg

Re: Need pics 60-66 (slammed not bagged)
 

Two coils ut up front and Jeep TJ springs plus 3" blocks in the rear. The front is pretty much on the trimmed bumpstops and the rear is about an inch off. The rear rides good, the front not so good. 1 1/2 coils is probably about perfect.

http://i12.photobucket.com/albums/a2...k/DSCF5851.jpg




***EDITED TO ADD***
The tires are 235/75/16

Re: Need pics 60-66 (slammed not bagged)
 

can anyone take a guess at what mine is? it sits so low. way lower than the 6-4 and i just bought it that way. any ganders?http://http://i686.photobucket.com/a...10truck002.jpg

Re: Need pics 60-66 (slammed not bagged)
 

My 63. about 1.5 or maybe 2 coils cut up front ( I can't remember), bump stops cut off and 70's Chevelle springs in the rear.
http://i117.photobucket.com/albums/o...0/DSC01570.jpg
http://i117.photobucket.com/albums/o...0/DSC01571.jpg

Re: Need pics 60-66 (slammed not bagged)
 

how do those chevelle springs handle a load? I know the jeep ones basically don't...

Re: Need pics 60-66 (slammed not bagged)
 

I don't really know Jon. I never haul anything. They do ride good though.

Re: Need pics 60-66 (slammed not bagged)
 

Cut your stops off and the bracket that hold them. It will ride fine.

Re: Need pics 60-66 (slammed not bagged)
 

This thing was cut way down in the front....removed steering stop/bumpstop mounts and short shocks....rode great, and could still go down more...
-
-
http://i29.tinypic.com/301pr90.jpg

Re: Need pics 60-66 (slammed not bagged)
 

I've got another set of lower control arms that are shaved. I just haven't swapped them out yet.

Re: Need pics 60-66 (slammed not bagged)
 

Just
get your handy saws all and a couple new blades . Takes about 5 min a side.:lol:

Re: Need pics 60-66 (slammed not bagged)
 

Do you remember how many coils you cut off?;)

Re: Need pics 60-66 (slammed not bagged)
 

But the "new" shaved control arms have new ball joints and shafts/bushings. :ito:

Re: Need pics 60-66 (slammed not bagged)
 

Ahhh.:lol:

Re: Need pics 60-66 (slammed not bagged)
 

Re: Need pics 60-66 (slammed not bagged)
 

love this truck needs fatter tires out back and to be in my drive way . but awsome , and i self less brought this tread back to the top as it is the one i use to find this site with out typing in the url .

Re: Need pics 60-66 (slammed not bagged)
 

Eibach springs F&R plus drop spindles and 5 inch rear blocks. C-notched frame.
I have tons of suspension left and it rides great.

Re: Need pics 60-66 (slammed not bagged)
 

Updated pics:
https://byfiles.storage.live.com/y1p...w/IMAG0623.jpg
https://byfiles.storage.live.com/y1p...Y/IMAG0620.jpg
https://byfiles.storage.live.com/y1p...8/IMAG1254.jpg
https://byfiles.storage.live.com/y1p...g/IMAG1249.jpg
https://byfiles.storage.live.com/y1p...k/IMAG1247.jpg
https://byfiles.storage.live.com/y1p...I/IMAG1248.jpg

Re: Need pics 60-66 (slammed not bagged)
 

http://i52.photobucket.com/albums/g2...IMAG0204-1.jpg

Front: 2" shaved crossmember / 2.5" drop spindles / new stock ride height springs
Rear: Tbird IRS, Eibach 600 lb/in springs

Rides pretty good. :)

Re: Need pics 60-66 (slammed not bagged)
 

Here is my new to me 64.

All from ECE...
2-1/2" drop spindles
6-lug disc brake conversion
2" drop front coils
1-1/4" sway bar with brackets for lowered trucks
KYB front shocks
6" drop rear springs
shock relocator brackets for rear
KYB rear shocks
Super Panhard bar

http://i670.photobucket.com/albums/v...opySmall-1.jpg

Re: Need pics 60-66 (slammed not bagged)
 

here my pic

Re: Need pics 60-66 (slammed not bagged)
 

sorry i could not my pic but i fix it

Re: Need pics 60-66 (slammed not bagged)
 

^^Looks good!^^ How much drop and what did you use?

Chris

Re: Need pics 60-66 (slammed not bagged)
 

http://i194.photobucket.com/albums/z...9/CIMG5622.jpg
Front 3 inch drop springs and 3 inch DJM drop lower control arms, Rear Jeep TJ springs, no blocks no C notch. Wheels are Ridler 18x8 0 offset tires 255-55-18 Goodyear LS2.
Front is about as low as you can go without inner fender mods, I can't put my fist between the top of the tire and the inner fender. Rear is very soft with the Jeep springs, too soft really, there's about 2 1/2 inches before the snubbers hit.

Re: Need pics 60-66 (slammed not bagged)
 

Can you post up a pic of those blocks for me? Curious as to how they are supposed to sit and how to asjust the pinion angle. Thanks.

sam

Re: Need pics 60-66 (slammed not bagged)
 

:chevy:64 step:chevy:

Be ready to "Stepaside" once I have this bad boy going the way I want to....Found it in Arkansas. The look it has is the way I bought it...Looking to chrome it out and paint it hot rod black...Any other ideas are welcome...
Thanks
Stepaside
"We are what we repeatedly do, excellence is then not an act it's a habit."

Re: Need pics 60-66 (slammed not bagged)
 

Here's mine. ECE 4/6 with 2.5" drop spindles and 2" blocks in back.

Re: Need pics 60-66 (slammed not bagged)
 

That thing is AWE-TASTIC!! Mine came from AR too. I have a 63 short stepper. I think we may have a pair of twins here soon, Brother!! I am painting mine that same suede black and ridin till the wheels fold up!! :metal:

Sam

Re: Need pics 60-66 (slammed not bagged)
 

I hear ya bro...add me as a friend and we can send pics as we make progress...Im new to this so maybe you can give me some ideas and pointers...God Bless you too for serving our country...Lead the way
StepAside

Re: Need pics 60-66 (slammed not bagged)
 

Thats a bad little dude...send me some pics of the inside..I love the wheels on that thing...very nice...you inspire me!

Re: Need pics 60-66 (slammed not bagged)
 

I just figured out how to reply to your message..duhh...ha

Re: Need pics 60-66 (slammed not bagged)
 

Stepaside, What's under the hood of your rig?

Re: Need pics 60-66 (slammed not bagged)
 

350 bored out...the guy told me it used to run mid 11's. Seems pretty fast still, just needs some tlc...and what are u rollin with...

Re: Need pics 60-66 (slammed not bagged)
 

here's a few of mine.10 inch notch 5 leaves removed axle flipped and 2 inch blocks with air shocks. this height is all the way up and ride height.

Re: Need pics 60-66 (slammed not bagged)
 

A bone-stock 350 and 700R4... I also have a 5.7L TPI from a Firebird and I am planning to swap them out in a few weeks. I just need to sell off the carbed 350 motor and trans to pay for the swap.

Re: Need pics 60-66 (slammed not bagged)
 

dam look good :ito:

Re: Need pics 60-66 (slammed not bagged)
 

http://i61.photobucket.com/albums/h7...cture004-3.jpg

body dropped 4 inch everything eles is stock